New Arrivals

Upgrade your Curt Q-Series or A-Series hitch to a combo hitch so you can tow your gooseneck trailer without having to go through the pain of hauling your heavy 5th-wheel hitch out of the truck bed.

• Accessories and Parts
• 5th Wheel Hitch
• Combo Hitch
• Gen-Y Hitch

The flexing rubber cords built into this adjustable channel limit the vertical shock when you tow your heavy construction or excavation equipment. Bolts into the adjustable channel on your trailer with the included bolts. Coupler sold separately.

• Accessories and Parts
• Lunette Ring
• Adjustable Trailer Coupler
• Channel Bracket
• 32000 lbs
• Bolt-On
• Shock-Absorbing
• 5 Mounting Positions
• Gen-Y Hitch

Upgrade your B&W Patriot hitch to a combo hitch so you can tow your gooseneck trailer without having to go through the pain of hauling your heavy 5th-wheel hitch out of the truck bed.

• Accessories and Parts
• 5th Wheel Hitch
• Combo Hitch
• Gen-Y Hitch

This shock-absorbing shank gives you 12 mounting positions for attaching your weight distribution system. Flexing rubber cords limit shock. Tongue weight scale shows if load needs to be adjusted. Works with most standard weight distribution systems.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 2300 lbs TW
• Fits 2-1/2 Inch Hitch
• Square - 11 Inch Drop
• Gen-Y Hitch

Replaces the locking twist clip on your Gen-Y gooseneck clevis pin. Works with all Gen-Y gooseneck clevis pins. Includes 5 clips.

• Accessories and Parts
• Gooseneck Hitch
• Pins and Clips
• Locking Clips
• Gen-Y Hitch

This shock-absorbing shank gives you 6 mounting positions for attaching your weight distribution system. Flexing rubber cords limit shock. Tongue weight scale shows if load needs to be adjusted. Works with most standard weight distribution systems.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1000 lbs TW
• Fits 2-1/2 Inch Hitch
• Square - 6 Inch Drop
• Gen-Y Hitch

Replaces one of the ramps for your Gen-Y Hitch aluminum loading ramp set. Ramp is 7' long and 14" wide. Supports 3,000 lbs. Includes serrated aluminum panels for extra grip.

• Accessories and Parts
• Car Ramps
• ATV Ramps
• Trailer Ramps
• Ramps
• Gen-Y Hitch

Keep your hitch receiver free from grime and protect the rear of your vehicle while you're at it with this skid plate that mounts in your 2" hitch. Durable, corrosion-resistant aluminum has a clear-coat finish.

• Accessories and Parts
• Hitch Step
• Trailer Hitch
• Skid Plate
• Gen-Y Hitch

Install a weight distribution system (sold separately) on your Gen-Y Hitch adjustable ball mount with this adapter. Shank slides into the 2-1/2" stacked receivers providing attachment points for a system head. Secures with included pin and clip.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 2900 lbs TW
• Gen-Y Hitch

This shock-absorbing shank gives you 10 mounting positions for attaching your weight distribution system. Flexing rubber cords limit shock. Tongue weight scale shows if load needs to be adjusted. Works with most standard weight distribution systems.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1500 lbs TW
• Fits 2-1/2 Inch Hitch
• Square - 9 Inch Drop
• Gen-Y Hitch

Replaces the Y shank on your Gen-Y adjustable stabilizer bar kit. Fits in the back of your 2" stacked receiver and provides attachment points for stabilizer bars.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Stabilizer Bars
• Gen-Y Hitch

This screwdriver-like tool is required to disconnect hoses from your JR Products LP Gas Manifold.

• Accessories and Parts
• Propane Fittings
• Tools
• Manifold
• JR Products

Add extra sturdiness to a fold-out tray, slide-out camp kitchen, or portable table. Once installed, this table leg will fold flat against whatever you mount it to. Leg height adjusts in 1" increments from 22-1/2" up to 35-1/2"

• Accessories and Parts
• Camping Table
• Table Legs
• JR Products

Replaces the lock cover set for your Inno roof rack feet. Fits Inno feet for square crossbars (INSUT).

• Accessories and Parts
• Roof Rack
• Lock Parts
• Tower Parts
• Covers
• Feet
• Inno

EVs put more stress on tires. Counteract EV Lube locks them in. This synthetic, non-petroleum formula adds extreme adhesion to reduce slippage and protect beads and rims. A secure fit means better performance, longer tire life, and peace of mind.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Tires and Wheels
• Tire Mounting Compound
• Counteract

Tired of cranking, bouncing, or backing in too deep at the ramp? Slydz-On helps your boat slide off and onto your trailer bunks smoother, without the mess of grease or installing rollers. Just spray it on, let it dry, and let it work.

• Accessories and Parts
• Boat Trailer Parts
• Lubricant
• Sprays
• Caliber

Replaces the rotary knob for your Curt Spectrum trailer brake controller (C51170). Dash-mounted knob keeps your vehicle interior looking sleek while giving you easy access to the brake controller.

• Accessories and Parts
• Trailer Brake Controller
• Control Knob
• CURT

Replaces the 2" hitch ball for your Curt Switch ball trailer ball set with a 1-1/8" neck.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Balls
• 2 Inch Ball
• CURT

Replace the lost or damaged center pin for your Curt PowerRide fifth-wheel trailer hitch. Pin secures the 5th wheel head to the hitch body.

• Accessories and Parts
• 5th Wheel Hitch
• Pins and Clips
• CURT

For heavy-duty applications, this strap has a break strength of 4,800 lbs and a working load limit of 1,600 lbs.

• Accessories and Parts
• Trailer Winch
• Cables and Straps
• 22-3/8 Inch Wide
• 1600 lbs
• Straps
• CURT

Heavy-duty replacement support brackets fit Curt TruTrack 2P weight distribution systems with integrated active sway control. Allows you to mount your spring bars on trailer frames up to 6".

• Accessories and Parts
• Weight Distribution Hitch
• Sway Control Parts
• Brackets
• CURT

New adventures are exciting, but leaving your bike unattended isn't. These wheel locks secure your bikes to the rack, deterring thieves and giving you peace of mind. Your ride will stay safe while you take a break or gear up for the next journey.

• Accessories and Parts
• Hitch Bike Racks
• Lock Parts
• Wheel Locks
• Crosstrack
• Hollywood Racks

If you leave everything on the trail and are completely gassed when you're done cycling, you're not gonna want to lift your bike onto a rack before heading home. The Crosstrack Ramp lets you to roll your ride into place and hit the road.

• Accessories and Parts
• Hitch Bike Racks
• Ramps
• Crosstrack
• Hollywood Racks

Replaces the end cap with reflector for Hollywood Racks RV Rider (HR1600 or HR1700) or Sport Rider (HR1400, HR1450, HR1450-E, HR1450-R, or HR1455-E) bike rack. Fits 2" square tubing.

• Accessories and Parts
• RV and Camper Bike Racks
• Hitch Bike Racks
• End Caps
• Sport Rider
• RV Rider
• Hollywood Racks