New Arrivals

Retractable tonneau for your vehicle has aluminum slats and a vinyl top layer that combine the strength and security of a hard cover and seamless look of a soft cover. It locks at any point along the rails, and it retracts easily with a handle.

• Tonneau Cover
• Retractable - Manual
• Not Rack Compatible
• Opens at Tailgate
• Built-In Lock
• Aluminum and Vinyl
• Matte
• Pace Edwards

You can install this retractable, hard tonneau cover on your vehicle in about 10 minutes, and you can completely remove it just as quickly for full bed access. Aluminum and vinyl deck has strength of a hard cover and seamless look of a soft cover.

• Tonneau Cover
• Retractable - Manual
• Not Rack Compatible
• Opens at Tailgate
• Tailgate Lock
• Aluminum and Vinyl
• Vinyl Grain
• Pace Edwards

Retractable hard tonneau cover protects your cargo and truck bed. Heavy-duty aluminum panels and silicone hinges help seal bed. Cover locks at 12" increments along the rails, and retracts easily with a quick-release handle.

• Tonneau Cover
• Retractable - Manual
• Rack Compatible
• Opens at Tailgate
• Built-In Lock
• Aluminum
• Vinyl Grain
• Pace Edwards

You can install this retractable, hard tonneau cover on your vehicle in about 10 minutes, and you can remove it just as quickly for full bed access. Heavy-gauge aluminum panels with silicone hinges help protect your cargo from the elements.

• Tonneau Cover
• Retractable - Manual
• Not Rack Compatible
• Opens at Tailgate
• Tailgate Lock
• Aluminum
• Vinyl Grain
• Pace Edwards

Retractable tonneau cover with T-slot rails lets you add a light-duty ladder rack or roof rack to your vehicle. Heavy-duty aluminum panels and silicon hinges help seal the bed. Multiple weather seals and drain tubes offer enhanced cargo protection.

• Tonneau Cover
• Retractable - Manual
• Rack Compatible
• Opens at Tailgate
• Built-In Lock
• Aluminum
• Matte
• Pace Edwards

Be seen with this 3/4" round amber LED light for clearance or side marking. Mounted in a UV-resistant bracket for easy installation on flat surfaces. Quick wiring with an 8", stripped, 2-wire pigtail - just connect and go. PC rated.

• Trailer Lights
• Clearance Lights
• Side Marker
• Rear Clearance
• Round
• Surface Mount
• Submersible Lights
• 3/4 Inch Diameter
• Amber
• Peterson

Protect plywood edges on your trailer or ramp door with P&F Products angle trim. This sturdy, rustproof aluminum trim is easy to cut and install, giving your project a clean, professional finish.

• Trailer Trim
• Plywood Edge
• Angle Trim
• Aluminum
• P&F Products

Finish cut edges on your trailer, stone guard, or siding with P&F Products rounded J-channel trim. This sturdy, rustproof aluminum trim is easy to cut to fit your specific project and gives your build a clean, professional look.

• Trailer Trim
• Siding
• Stone Guard
• J-Channel Trim
• Aluminum
• P&F Products

Two-piece aluminum cargo trailer ladder, 7' tall, finished in black powder coat with mounting hardware.

• Trailer Cargo Organizers
• Ladders
• 7 Feet Tall
• Drilling Required
• P&F Products

Give your trailer or cabinet project a finished look with P&F Products aluminum nosing. This sturdy trim covers sharp edges on cabinets or stone guards, protecting against wear and tear while adding a clean, professional touch.

• Trailer Trim
• Stone Guard
• Interior
• Edge and Corner Trim
• Aluminum
• P&F Products

Upgrade your trailer with P&F Products interlocking aluminum flooring. This sturdy, rustproof surface is easy to cut to fit your specific project and creates a clean, professional finish that stands up to years of use.

• Trailer Flooring
• Aluminum
• Silver
• P&F Products

Finish your trailer project right with P&F Products top rail trim. This sturdy, rustproof aluminum trim covers exposed edges on the top or bottom of your trailer, giving your build lasting protection and a clean, professional look.

• Trailer Trim
• Top/Bottom Edge
• Top/Bottom Rail Trim
• 160 Inch Long
• Aluminum
• P&F Products

Build sturdy cabinets or doors for your enclosed trailer with P&F Products H-frame channel. This rustproof, serrated-edge aluminum trim is easy to cut and install, giving your project a clean, finished look that lasts.

• Trailer Trim
• Interior
• Door/Window
• H-Channel Trim
• Serrated
• 93-1/2 Inch Long
• Aluminum
• P&F Products

Two-piece aluminum cargo trailer ladder, 8' tall, finished in black powder coat with mounting hardware.

• Trailer Cargo Organizers
• Ladders
• 8 Feet Tall
• Drilling Required
• P&F Products

Protect and finish the lower edges of your trailer with P&F Products uneven rub rail trim. This strong, rustproof aluminum trim is easy to cut to fit your specific project, giving you a clean, durable edge that lasts.

• Trailer Trim
• Top/Bottom Edge
• Stone Guard
• Rub Rail Trim
• Serrated
• 93-1/2 Inch Long
• Aluminum
• P&F Products

Conceal raw edges on your trailer or cabinets with P&F Products smooth C-channel trim. This sturdy, rustproof aluminum trim is easy to cut and install, giving your project a clean, finished look that lasts.

• Trailer Trim
• Door/Window
• Plywood Edge
• Interior
• C-Channel Trim
• Smooth
• 93-1/2 Inch Long
• Aluminum
• P&F Products

Add a clean, professional edge to your trailer or cabinet project with P&F Products aluminum nosing. This strong, rustproof trim covers sharp edges for a finished look and lasting protection wherever you need it.

• Trailer Trim
• Interior
• Stone Guard
• Edge and Corner Trim
• Aluminum
• P&F Products

Protect plywood edges on your trailer or ramp spring door with P&F Products angle trim. This sturdy, rustproof aluminum trim is easy to cut and install, giving your project a strong, finished look that stands up to years of use.

• Trailer Trim
• Plywood Edge
• Angle Trim
• 93-1/2 Inch Long
• Aluminum
• P&F Products

Finish your enclosed trailer project with P&F Products top rail trim. This sturdy, rustproof aluminum trim protects exposed edges on the top or bottom of your trailer, adding a clean, professional finish that stands up to years of use.

• Trailer Trim
• Top/Bottom Edge
• Top/Bottom Rail Trim
• 93-1/2 Inch Long
• Aluminum
• P&F Products

Finish cut edges on your trailer, stone guard, or siding with P&F Products squared J-channel trim. This sturdy, rustproof aluminum trim is easy to cut to fit your specific project and gives your build a clean, professional look.

• Trailer Trim
• Stone Guard
• Top/Bottom Edge
• J-Channel Trim
• Aluminum
• P&F Products

Two-piece aluminum cargo trailer ladder, 8' tall, milled aluminum finish with mounting hardware.

• Trailer Cargo Organizers
• Ladders
• 8 Feet Tall
• Drilling Required
• P&F Products

Give your trailer project a custom edge with P&F Products aluminum tube trim. Build strong ladder racks or frames that last, and enjoy a clean, professional look for work or weekend adventures.

• Trailer Trim
• Structural
• Tube Trim
• Smooth
• Aluminum
• P&F Products

Protect and finish the lower edges of your trailer with P&F Products uneven rub rail trim. This sturdy, rustproof aluminum trim is easy to cut and install, giving your project a clean, professional look that lasts.

• Trailer Trim
• Top/Bottom Edge
• Rub Rail Trim
• Aluminum
• P&F Products

Two-piece aluminum cargo trailer ladder, 6' tall, milled aluminum finish with mounting hardware.

• Trailer Cargo Organizers
• Ladders
• 6 Feet Tall
• Drilling Required
• P&F Products