New Arrivals

Tow your trailer with confidence using this PullRite capture plate, designed for Lippert Helux pin boxes. It locks the king pin to ensure smooth tracking with SuperGlide hitches, preventing unwanted rotation and enhancing towing safety.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Lippert Helux
• Pullrite

This adapter attaches to the factory, underbed fifth wheel towing prep package receivers in your vehicle. The base provides the attachment point for your 5th-wheel hitch with industry standard tabbed feet. Modular design allows for easy removal.

• Accessories and Parts
• 5th Wheel Hitch Rails
• Adapters
• Rail Adapter
• Custom
• Pullrite

Replaces the base for your PullRite ISRX Super or SuperLite 5th-wheel hitch for industry-standard rails. Rated for 24,000 lbs gross towing weight.

• Accessories and Parts
• 5th Wheel Hitch
• Base
• Pullrite

Bolt this capture plate onto your Lippert 0719 pin box to prevent the king pin from rotating inside your PullRite fifth-wheel hitch.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Lippert Pin Box
• Pullrite

Take control of every turn with the PullRite SuperGlide Capture Plate! Built for 12-1/2" MOR/ryde pin boxes, it locks in a secure hitch connection, smooth auto sliding & stress-free towing. Durable, easy to install & ready for the long haul.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• MORryde Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Lippert 1621 pin boxes with skid plates that are 12-3/4" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Protect the finish on your hitch and truck bed with these lube plates. Designed for the #2600 SuperLite 20K and #3900 Super 5th 24K hitches, these durable nylon plates reduce friction and eliminate the need for messy lubricants.

• Accessories and Parts
• 5th Wheel Hitch
• Plates
• Lube Plate
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Flex Air pin boxes with skid plates that are 13-1/4" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

If your start battery and secondary battery are at opposite sides of your engine bay, this wiring kit gives you everything you need to make connections with your Redarc Alpha 50A DC battery charger.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Keep your GoBlock safe on every adventure! The transit bag's rugged Oxford polyester material, rubber feet, and handy pockets make it the perfect travel buddy. Dust, dirt, or rough trails? No problem. Grab your gear and go!

• Accessories and Parts
• Portable Chargers
• Storage Bag
• Redarc

Fuse kit contains 2 high-quality, 50-amp fuses with a protective holder. Works with Redarc TVMS Rogue (RED92RR) or Manager30 (RED88FR, RED93FR). Fuses protect your setup from potentially damaging overcurrent caused by short circuits or overloads.

• Accessories and Parts
• Smart RV
• Fuses
• Redarc

This bracket is designed to fit any vehicle's mounting points in the engine bay. Once mounted with the included hardware, it will help ensure your Redarc BCDC has airflow around it to keep it cool.

• Accessories and Parts
• Battery Charger
• Mounting Hardware
• Brackets
• Redarc

Wire loom allows you to connect your RedVision Total Vehicle Management System Prime to the existing sensors on your fresh-water tank.

• Accessories and Parts
• Smart RV
• Sensors
• Wiring
• Redarc

Expand your TVMS Rogue smart RV system with sensors for monitoring your holding tanks. Safe to use in with fresh water, waste water, or fuel tanks.

• Accessories and Parts
• Smart RV
• Sensors
• Redarc

Add this bracket to your 2022 or newer V6 Ford Ranger or Raptor to ensure your Redarc BCDC has plenty of airflow to keep it cool so it can keep your batteries charged. Mounts with included installation hardware.

• Accessories and Parts
• Battery Charger
• Mounting Hardware
• Brackets
• Redarc

Multipurpose cable lets you wire a solar panel with MC4 connectors to a solar charge controller with hardwire inputs. Also can be used for adding extra cable length to solar panels or connecting to chargers or battery management systems.

• Accessories and Parts
• Solar Charge Controllers
• Cables and Connectors
• Adapters
• Redarc

If your start battery and secondary battery are close to each other in your engine bay, this wiring kit gives you everything you need to make connections with your Redarc Alpha 25A DC battery charger.

• Accessories and Parts
• Battery Charger
• Cables
• Side-by-Side Wiring Cable
• Redarc

Got a rear-vehicle setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 21"4" apart. Made for the Redarc BCDC Alpha 50A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Expand your TVMS Rogue smart RV system with sensors for monitoring your holding tanks. Safe to use in with fresh water, waste water, or fuel tanks.

• Accessories and Parts
• Smart RV
• Sensors
• Redarc

If your start battery and secondary battery are at opposite sides of your engine bay, this wiring kit gives you everything you need to make connections with your Redarc Alpha 25A DC battery charger.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

The PowerDock secures your GoBlock, charges it fast, and simplifies setup. Lock your GoBlock in, hit the trail, and pop the quick-release handle to go portable. With solar priority and anti-theft features, it's ready for any adventure!

• Accessories and Parts
• Portable Chargers
• Docking Station
• Redarc

6-1/2' Long cable connects your Redarc Tow-Pro Elite brake controller's control knob to the main unit. Automotive-grade harness is durable.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Harness
• Redarc

Got a mid-vehicle battery setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 14'9" apart. Made for the Redarc BCDC Alpha 50A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Multipurpose cable lets you wire a solar panel with Anderson connectors to a solar charge controller with hardwire inputs. Also can be used for adding extra cable length to solar panels, or connecting to chargers or battery management systems.

• Accessories and Parts
• Solar Charge Controllers
• Cables and Connectors
• Adapters
• Redarc