New Arrivals

Mount it outside your RV or in your wet bay and hit the ground running - this panel keeps all your water and cable hookups in one spot with capped ports to keep things clean. Less fiddling, more chilling.

• RV Water Inlets
• City Fill Inlet
• Flush Mount
• Plastic
• Black
• B and B Molders

You're checking the top rear seam of the slide-out and notice the trim corners exposed. The caps missing and now water or road spray can sneak in. This replacement screws into place and finishes off the joint while blending with the trim.

• RV Trim
• Plastic Molding
• White
• B and B Molders

You've dealt with the smell, the mess, and the hose dragging across everything in the storage bay. You cut a hole for the hatch, drop the hose in, and close it up. Now it's contained, easy to reach, and not touching anything it shouldn't.

• RV Access Doors
• Sewer Hose Hatch
• Rectangle
• Locking
• 8W x 6-1/2T Inch
• White
• B and B Molders

You're walking around your rig and spot the trim on the slide-out. The arrow cover's missing, and the cutout is exposed. This replacement arrow cover seals it up, keeps debris out, and sticks on with pre-applied tape.

• RV Slide Out Parts
• Caps and Covers
• Straight Arrow Corner
• Tape-On
• Black
• B and B Molders

You're up on the ladder checking your slide-out and notice the corner is exposed. The square cover is gone, and now water's got a direct shot into the seam. This replacement squares it off, seals the joint, and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• White
• B and B Molders

You settle in, the air's just right, and everything feels still. That's no accident. This ceiling vent helps shape the comfort around you, quietly guiding airflow where it belongs so your space feels calm, even after a long day on the road.

• RV Vents and Fans
• Vent
• Ceiling Vent
• No Fan
• Plastic
• White
• B and B Molders

You're filling the fresh tank before a long weekend and your original water hatch is cracked, loose, and barely hanging on. You know it's time for a new one. This kit has everything you need to swap it out and get ready for the next trip.

• RV Water Inlets
• Gravity Fill Inlet
• Flush Mount
• Plastic
• Black
• B and B Molders

You're checking under the slide-out and notice the right-side drip pan is missing. Now water has a direct path to the underbelly and trim. This replacement pan fits snug at the floor corner and helps steer runoff away from the RV.

• RV Slide Out Parts
• Caps and Covers
• Drip Pan
• Bolt-On
• Black
• B and B Molders

You're up on the ladder checking your slide-out and notice the corner is exposed. The square cover is gone, and now water's got a direct shot into the seam. This replacement squares it off, seals the joint, and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• Gray
• B and B Molders

Tucked into the wall and sealed up tight, this docking station keeps your hookups organized and out of sight. Flip the door, hook up, and you'refree to kick back - your campsite setup just got way easier.

• RV Water Inlets
• City Fill Inlet
• Recessed Mount
• 3-3/4 Inch Deep
• Plastic
• Black
• B and B Molders

You're walking up to the front of your 5th wheel and spot the trim corner exposed. The cover is gone, and now the seam is open to moisture and road spray. This replacement screws into place to finish off the edge and match your front-end trim.

• RV Trim
• Plastic Molding
• Black
• B and B Molders

You're replacing a sun-faded, road-battered, barely sealed access hatch that's been holding on by a thread since your last trip. You pull it off, line up the new one, and it fits. Like it was made for your rig from the start. Because it was.

• RV Access Doors
• Multi-Purpose Hatch
• Rectangle
• Locking
• 6-1/2W x 7-5/8T Inch
• 5-7/8W x 4-3/4T Inch Cutout
• White
• B and B Molders

You're checking the base of the slide-out after a long weekend and notice the right-hand trim cap is gone. The open end is collecting dirt and giving water a way in. This replacement screws into place to cover the opening and matches your trim.

• RV Trim
• Plastic Molding
• Black
• B and B Molders

You're walking around your rig and notice the trim ends suddenly on the left side. No cap, just an exposed edge catching dirt and water. This replacement seals it up and finishes the run so it actually looks like it came that way.

• RV Slide Out Parts
• Caps and Covers
• End Cap
• Bolt-On
• Black
• B and B Molders

Mount it outside your RV or in your wet bay and hit the ground running - this panel keeps all your water and cable hookups in one spot with capped ports to keep things clean. Less fiddling, more chilling.

• RV Water Inlets
• City Fill Inlet
• Flush Mount
• Plastic
• Black
• B and B Molders

You're replacing a sun-faded, road-battered, barely sealed access hatch that's been holding on by a thread since your last trip. You pull it off, line up the new one, and it fits. Like it was made for your rig from the start. Because it was.

• RV Access Doors
• Multi-Purpose Hatch
• Rectangle
• Locking
• 6-1/4W x 5T Inch
• 5-1/2W x 4-1/8T Inch Cutout
• Gray
• B and B Molders

You're checking the base of the slide-out after a long weekend and notice the right-hand trim cap is gone. The open end is collecting dirt and giving water a way in. This replacement screws into place to cover the opening and matches your trim.

• RV Trim
• Plastic Molding
• Black
• B and B Molders

Driving a big vehicle means you can't afford to guess what's in your blind spots. With four cameras and a recording monitor, this system gives you a clear view around your entire rig and video proof if something goes wrong on the road.

• Backup Camera
• Backup Camera Systems
• Side Mount Camera System
• Hardwired
• Dash Monitor
• Brandmotion

You're up on the ladder checking your slide-out and notice the corner is exposed. The square cover is gone, and now water's got a direct shot into the seam. This replacement squares it off, seals the joint, and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• Black
• B and B Molders

The rain starts to fall, and you don't even flinch. Thats how it should be. This little splice makes sure the flow keeps going. No drips from the seams or streaks down the side. Just water headed where it's supposed to go.

• RV Trim
• Gutter Parts
• Black
• B and B Molders

You're walking around your rig and spot the end of the trim line sticking out. The cap is missing, leaving the edge exposed to water and road spray. This return-style end cap with a molded step finishes off the run and blends in with your trim.

• RV Slide Out Parts
• Caps and Covers
• End Cap
• Bolt-On
• Gray
• B and B Molders

It's not the flashiest part of your rig, but it's necessary. This vent cover keeps air moving and water out, so the inside stays fresh, no matter what's happening outside. You'll forget it's there. That's exactly the point.

• RV Vents and Fans
• Vent Cover
• Plumbing Vent
• Plastic
• Black
• B and B Molders

You're checking the inside corner of the slide-out and spot the trim joint exposed. The cover's missing, and now there's a gap catching dust and grime. This replacement covers it up and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Inside Corner
• Bolt-On
• White
• B and B Molders

You're up on the ladder checking your slide-out and notice the corner is exposed. The square cover is gone, and now water's got a direct shot into the seam. This replacement squares it off, seals the joint, and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• Beige
• B and B Molders