New Arrivals

This stainless steel acorn lug nut laughs in the face of rust. Perfect for saltwater use, it stays strong and rust-free. No chipping, no peeling, just a tough, reliable fit that shrugs off moisture, salt, and road grime for the long haul.

• Accessories and Parts
• Trailer Tires and Wheels
• Golf Cart Tires and Wheels
• Boat Trailer Wheels
• Wheel Lug Nut
• 9/16 Inch Wheel Bolt
• Acorn Nut
• 60-Degree Cone
• Stainless Steel
• DeeMaxx

This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• LH
• 10000 lbs
• 9000 lbs
• Brake Assembly
• 12-1/4 x 3-3/8 Inch Drum
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Kit helps repair your harness on your Dexter ABS tow system.

• Accessories and Parts
• Trailer Brakes
• Electric Drum Brakes
• ABS System Wheel Sensor Parts
• Wiring Harness
• Repair Kit
• Dexter Axle

Power up and down with confidence using this rugged Dexter KTI double action 12V pump. 3 Quart reservoir delivers reliable hydraulic flow for dump trailers, lifts, and more. Includes PU/PD remote and manual override for control anywhere.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Hydraulic Parts
• Pumps
• Dexter

Replaces your wheel sensor on your Dexter ABS tow system.

• Accessories and Parts
• Trailer Brakes
• ABS System Wheel Sensor Parts
• Electric Drum Brakes
• Sensors
• Dexter Axle

10" x 2-1/4" Passenger's-side electric trailer brake assembly fits Dexter Tow Assist 3,500-lb axles. Mounting flange has a 4-bolt pattern. Nev-R-Adjust brakes require little maintenance. Fits 13" to 15" wheels.

• Accessories and Parts
• Trailer Brakes
• Electric Drum Brakes
• RH
• 3500 lbs
• Brake Assembly
• 10 x 2-1/4 Inch Drum
• Dexter Axle

Replaces (1) 3-1/2" x 5/8"-18 Dexter Axle press-in wheel stud for 8K to 12K disc brakes or idler hubs with 5/8" studs.

• Accessories and Parts
• Trailer Hubs and Drums
• Boat Trailer Wheels
• Trailer Tires and Wheels
• Wheel Studs
• 5/8 Inch Diameter
• Drive-In Stud
• Dexter

10" x 2-1/4" Passenger's-side electric trailer brake assembly fits Dexter Tow Assist 4,400-lb axles. Mounting flange has a 4-bolt pattern. Nev-R-Adjust brakes require little maintenance. Fits 13" to 15" wheels.

• Accessories and Parts
• Trailer Brakes
• Electric Drum Brakes
• RH
• 4400 lbs
• Brake Assembly
• 10 x 2-1/4 Inch Drum
• Dexter Axle

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Replace the pivot hardware in your Dexter suspension equalizer with this complete OEM kit. Includes bushings, bolts, locknuts, and instructions to restore quiet, reliable performance.

• Accessories and Parts
• Trailer Suspension Parts
• Hardware
• Dexter

Passenger's-side 10" x 2-1/4" hydraulic drum brake assembly features a free-backing design for smooth reversing. Fits 3,500-lb axles with 13" to 15" wheels and mounts with a 4-bolt flange.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• RH
• 3500 lbs
• Brake Assembly
• 10 x 2-1/4 Inch Drum
• Dexter

Replace or add a reverse lockout solenoid to your surge brake actuator from Dexter or Tie Down Engineering to keep the actuator from activating your trailer brakes when you shift into reverse.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• Solenoid
• Dexter

12-1/4" x 2-1/2" Passenger's-side electric trailer brake assembly fits Dexter Tow Assist 7,500-lb axles. Mounting flange has a 4-bolt pattern. Nev-R-Adjust brakes require little maintenance. Fits 15" or larger wheels.

• Accessories and Parts
• Trailer Brakes
• Electric Drum Brakes
• RH
• 7500 lbs
• Brake Assembly
• 12-1/4 x 2-1/2 Inch Drum
• Dexter Axle

Shank measures 12" long from the center of the hitch pin hole to the center of the adjustment holes. 7 Bolt holes let you adjust the height of your Blue Ox TrackPro weight distribution system. Fits 2" receivers. 850 lb tongue weight.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 700 lbs
• Fits 2 Inch Hitch
• Blue Ox

Mount your Blue Ox SwayPro weight distribution system with this heavy-duty shank. Designed for 2" hitches, this steel shank installs in either the rise or drop position and handles up to 15,000 lbs of trailer weight.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1400 lbs TW
• Fits 2 Inch Hitch
• Blue Ox

Replace the swivel assembly for your Blue Ox Avail or Ascent tow bars (BX7420 or BX4370).

• Accessories and Parts
• Tow Bar
• Swivel Collar
• Ascent
• Avail
• Blue Ox

You lost your rear factory camera when you removed the tailgate, but you don't have to give up safety. This camera mounts on your license plate and plugs into your truck's harness to bring that view back to your screen when you back up.

• Accessories and Parts
• Backup Camera
• Camera
• Wiring
• Tailgate Handle Camera
• Wiring Harness
• Brandmotion

Replaces the spacer bracket for installing diverter control handles on your B&B RV Nautilus P3 or P4 panel. Spans the distance from the valve to the back of the panel for added support and smooth operation.

• Accessories and Parts
• Smart RV
• Handles
• B and B Molders

Replaces the monitor for your Brandmotion Wireless HD Oberservation System.

• Accessories and Parts
• Backup Camera
• Monitors
• Dash Monitor
• Brandmotion

You want a better view behind you, but you're not looking to add an extra screen inside your vehicle. This touchscreen rear view mirror gives you a full LCD camera display right on the mirror. Just add your own camera, and you're set.

• Accessories and Parts
• Backup Camera
• Monitors
• Rearview Mirror Monitor
• Brandmotion

You lost your rear factory camera when you removed the tailgate, but you don't have to give up safety. This camera mounts on your license plate and plugs into your truck's harness to bring that view back to your screen when you back up.

• Accessories and Parts
• Backup Camera
• Camera
• Wiring
• Tailgate Handle Camera
• Wiring Harness
• Brandmotion

Add this heavy-duty camera to your Brandmotion monitor and improve your driving experience. Get a wide, clear view, parking lines, and low-light vision, so you always know what's behind you. Plus, the low-profile design is less obtrusive.

• Accessories and Parts
• Backup Camera
• Camera
• Standard Camera
• Brandmotion

You built your own setup, so you want a camera that's just as flexible. This bullet camera gives you a wide, adjustable rear view and a low-profile install, so you can upgrade your aftermarket display and see what's really behind you.

• Accessories and Parts
• Backup Camera
• Camera
• Flush Mount Camera
• Brandmotion