When you bleed pressure just to swap tools or close a line, you lose time waiting for your compressor to recover. This in-line valve lets you shut things off with a quarter turn and hold pressure in the system so you can keep working.
Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from a single 8-switch panel. Control box mounts under the hood and powers switch panel via the included wiring harness.
Some valve stems are tucked behind a fender or sit at a weird angle. This short, flexible hose gives you a little slack at the valve so you can connect the chuck without bending the main line or working at an awkward angle.
Some air chucks leak or pop off unless you hold them in place. This one pushes on and locks down so you can let go while the tire inflates. The internal shut-off keeps air in the system when it's not connected to a valve.
Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from your phone or the 8-switch panel. Bluetooth-enabled control box mounts under the hood and powers switch panel via the included wiring harness.
Some valve stems are buried deep or sit at the wrong angle for a standard chuck. This dual-head chuck with a flexible hose gives you the reach and angle you need to push the chuck onto the valve and fill the tire, even in tight spots.
Shank measures 12" long from the center of the hitch pin hole to the center of the adjustment holes. 7 Bolt holes let you adjust the height of your Blue Ox TrackPro weight distribution system. Fits 2" receivers. 850 lb tongue weight.
EVs put more stress on tires. Counteract EV Lube locks them in. This synthetic, non-petroleum formula adds extreme adhesion to reduce slippage and protect beads and rims. A secure fit means better performance, longer tire life, and peace of mind.
Tired of cranking, bouncing, or backing in too deep at the ramp? Slydz-On helps your boat slide off and onto your trailer bunks smoother, without the mess of grease or installing rollers. Just spray it on, let it dry, and let it work.
Replace the ball on your Curt TruTrack 2P hitch with this 2-5/16" steel ball. Made for 5,000-lb to 8,000-lb systems only (17599), it bolts to the head and matches your system's capacity for safe, stable towing.
Lost a fender on the road or cracked it backing into a tight spot? This replacement driver's-side fender assembly gets your Demco KarKaddy SS or KarKaddy 3 tow dolly looking sharp and road-ready again.
Square tube welds onto your trailer. Works with 4" width inner tubes (sold separately). Pairs perfectly with the eZ-Latch gooseneck coupler DM43KV (sold separately).
Add extra strength where your Demco cable anchor bolts to the firewall. This steel plate reinforces thin firewalls for Air Force One or Stay-IN-Play Duo installs, keeping the anchor secure.
Moving your 5th-wheel hitch to a new truck? This replacement hardware kit lets you reinstall your Demco universal above-bed base rails (DM6701) with all-new bolts, nuts, and washers - giving you a rock-solid fit for safe, confident towing.
Replaces 1 of the hard plastic cap plugs that install in the 2-1/2" square guide tubes on your Demco Autoslide fifth-wheel hitch. 2 Originally included with your hitch.
Replace the lost or damaged cable anchor in your Demco Stay-in-Play DUO or Air Force One system. Includes set screw to secure the cable in place and restore your systems function.
Replaces a worn or missing ramp bushing on your Demco Kar Kaddy SS tow dolly. This bushing ensures proper spacing, allowing the ramp to tilt up for storage and secure in lowered position for loading.
14-1/2" x 17". Tired of the rain damaging your electric tongue jack? Slip this weatherproof cover over your jack and secure it with a simple drawstring to keep the elements at bay. Fits most brands and styles of electric A-frame jacks.
Trying to pack more without cramming your camper? If you've already got a bumper-mounted cargo carrier, this kit turns it into a lockable, front-loading cargo cage so extra bags or muddy gear can ride outside, covered and out of sight.
Replaces the pull pin on the breakaway switch that came with your Demco Air Force One (9599007, 9599019, 9599020, or 9599021) or Stay-IN-Play Duo (SM99251 or SM99243) supplemental braking system.
Round tube welds onto your trailer. Works with 4" diameter inner tubes (sold separately). Pairs perfectly with the eZ-Latch gooseneck coupler DM73KV (sold separately).