New Arrivals

Got a mid-vehicle battery setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 14'9" apart. Made for the Redarc BCDC Alpha 50A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Multipurpose cable lets you wire a solar panel with Anderson connectors to a solar charge controller with hardwire inputs. Also can be used for adding extra cable length to solar panels, or connecting to chargers or battery management systems.

• Accessories and Parts
• Solar Charge Controllers
• Cables and Connectors
• Adapters
• Redarc

This custom battery tray mounts to the floor of your RV or camper to keep your Alpha150 battery securely locked in place during travel. Quick and simple installation with countersunk fasteners.

• Accessories and Parts
• Battery Boxes
• Battery Trays
• Redarc

Got a mid-vehicle battery setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 14'9" apart. Made for the Redarc BCDC Alpha 25A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Need to get your PowerDock wired up for your next adventure? This kit makes it easy with color-coded cables, tough hardware, and room to customize. It's built for rough trails, so you can get set up and get going in no time!

• Accessories and Parts
• Portable Chargers
• Cables and Cords
• Redarc

Side mounts work with corner mounts (RED79VR - sold separately) to attach single or multiple Redarc solar panels to an RV or boat. Attach mount to surface using a silicon adhesive or common fasteners.

• Accessories and Parts
• RV Solar Panels
• Mounting Hardware
• Redarc

Got a rear-vehicle setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 21"4" apart. Made for the Redarc BCDC Alpha 25A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Beach, campsite, or worksite - take your adventures off-grid! This all-in-one kit makes connecting your PowerDock a cinch. Hook up solar panels, power up anywhere, and rely on rugged Aussie durability to tackle the wild.

• Accessories and Parts
• Portable Chargers
• Cables and Cords
• Redarc

Got batteries close together? This kit has pre-crimped cables, fuses, and connectors for batteries less than 5' apart. Made for the Redarc BCDC Alpha 50A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Power your adventures with the GoBlock Inverter Connector Cable! Effortless, plug-and-play connection to your 400W Redarc inverter keeps you charged up, off-grid, and ready for the wild. Built tough, so you can explore worry-free!

• Accessories and Parts
• Portable Chargers
• Cables and Cords
• Redarc

Wire loom and sensors allow you to monitor levels in your fresh-water tank with your RedVision Total Vehicle Management System. Reads tank state in 20% increments.

• Accessories and Parts
• Smart RV
• Sensors
• Redarc

Adding cross rails to haul extra gear shouldnt mean giving up your tonneau cover. This adapter lets your TradeSport rack mount over select retractable covers, so you can keep your bed protected while carrying boats, ladders, or anything else up top.

• Accessories and Parts
• Ladder Racks
• Adapters
• Tonneau Cover
• Malone

Why choose between bed rails and a tonneau cover. This adapter lets you mount a CrossBed rack system without ditching your current, or future, set up. No drilling required. Giving you a clean solution that works with what you've got.

• Accessories and Parts
• Ladder Racks
• Adapters
• Tonneau Cover
• Malone

Replace RevX3 or upgrade your RevX2 support arms on your Mount-n-Lock GennyGo tray or cargo box (sold separately). Adjustable support arms extend or retract to fit different sized trays or boxes. Mounts around RV bumper and folds up when not in use.

• Accessories and Parts
• Generators
• RV Cargo Carrier
• Support Arms
• Mount-n-Lock

Need to haul that extra-heavy generator to the campsite? We highly appreciate that these brackets and reinforcement plates beef up an RV bumper weight rating by 400 lbs. You'll have peace of mind that your bumper won't detach on the highway.

• Accessories and Parts
• RV Cargo Carrier
• RV Bumpers
• Brackets
• Mount-n-Lock

Rugged, all-steel cargo carrier lets you haul your generator to the campsite and gives close access to an outlet without unloading. Durable, 30" x 30" tray and folding support arms hold up to 300 lbs. 72 Tie-down points help secure cargo.

• RV Cargo Carrier
• Accessories and Parts
• Generator Carrier
• Cargo Carrier
• Bumper Mount
• 300 lbs
• 30 Inch Deep
• Mount-n-Lock

Want to pack a lot more gear than your stock RV bumper can support? We get it. That's why we love that this aluminum bumper increases your weight rating so you can throw extra bikes on the back of your RV and fully enjoy your off-road journey.

• Accessories and Parts
• RV Cargo Carrier
• RV Bumpers
• Bumper Parts
• Mount-n-Lock

Wish you could pack more coolers than your stock RV bumper can support? We've been there. So we love that this aluminum bumper increases your weight rating so you can throw more gear onto the back of your RV for your cross-country adventure.

• Accessories and Parts
• RV Cargo Carrier
• RV Bumpers
• Bumper Parts
• Mount-n-Lock

Increase the cargo capacity of your Mount-n-Lock 1H4HZ ShakeStopper clamping hitch to 400 lbs when weight is evenly distributed. Includes additional main and auxiliary pressure plates, and 2 retention plates. Uses existing hitch hardware.

• Accessories and Parts
• RV and Camper Hitch
• Cargo Capacity Upgrade
• Mount-n-Lock

Expand your exisiting steel GennyGo cargo tray from 24" x 24" to 30" x 30". Steel plates attach to to existing tray parts providing a larger footprint for more gear. Fits RevX3 folding support arms (sold separately).

• Accessories and Parts
• RV Cargo Carrier
• Generators
• Extensions
• Mount-n-Lock

Want to pack a lot more gear than your stock RV bumper can support? We get it. That's why we love that this aluminum bumper increases your weight rating so you can throw extra bikes on the back of your RV and fully enjoy your off-road journey.

• Accessories and Parts
• RV Cargo Carrier
• RV Bumpers
• Bumper Parts
• Mount-n-Lock

Hybrid, aluminum and steel cargo carrier lets you haul your generator to the campsite and gives close access to an outlet without unloading. Lightweight, 24" x 24" tray and folding steel support arms hold up to 300 lbs.

• RV Cargo Carrier
• Accessories and Parts
• Cargo Carrier
• Generator Carrier
• Bumper Mount
• 300 lbs
• 24 Inch Deep
• Mount-n-Lock

Wish you could pack more coolers than your stock RV bumper can support? We've been there. So we love that this aluminum bumper increases your weight rating so you can throw more gear onto the back of your RV for your cross-country adventure.

• Accessories and Parts
• RV Cargo Carrier
• RV Bumpers
• Bumper Parts
• Mount-n-Lock

Replaces the treat cover for the deep, top-step on your Gen 2 StepAbove RV steps with 23-1/2" wide treads.

• Accessories and Parts
• RV Steps
• Grip Tape
• MORryde