New Arrivals

Increase the cargo capacity of your Mount-n-Lock 1H6HZ ShakeStopper clamping hitch to 400 lbs when weight is evenly distributed. Includes additional main and auxiliary pressure plates, and 2 retention plates. Uses existing hitch hardware.

• Accessories and Parts
• RV and Camper Hitch
• Cargo Capacity Upgrade
• Mount-n-Lock

Want to pack a lot more gear than your stock RV bumper can support? We get it. That's why we love that this aluminum bumper increases your weight rating so you can throw extra bikes on the back of your RV and fully enjoy your off-road journey.

• Accessories and Parts
• RV Cargo Carrier
• RV Bumpers
• Bumper Parts
• Mount-n-Lock

Replace or add an additional RevX3 support arm on your Mount-n-Lock GennyGo tray or cargo box (sold separately). Adjustable support arm extends or retracts to fit different sized trays or boxes. Mounts around RV bumper and folds up when not in use.

• Accessories and Parts
• Generators
• RV Cargo Carrier
• Support Arms
• Mount-n-Lock

Wish you could pack more coolers than your stock RV bumper can support? We've been there. So we love that this aluminum bumper increases your weight rating so you can throw more gear onto the back of your RV for your cross-country adventure.

• Accessories and Parts
• RV Cargo Carrier
• RV Bumpers
• Bumper Parts
• Mount-n-Lock

Rugged, all-steel cargo carrier lets you haul your generator to the campsite and gives close access to an outlet without unloading. Durable, 24" x 24" tray and folding support arms hold up to 300 lbs. 60 Tie-down points help secure cargo.

• RV Cargo Carrier
• Accessories and Parts
• Cargo Carrier
• Generator Carrier
• Bumper Mount
• 300 lbs
• 24 Inch Deep
• Mount-n-Lock

Want to pack a lot more gear than your stock RV bumper can support? We get it. That's why we love that this aluminum bumper increases your weight rating so you can throw extra bikes on the back of your RV and fully enjoy your off-road journey.

• Accessories and Parts
• RV Cargo Carrier
• RV Bumpers
• Bumper Parts
• Mount-n-Lock

Replaces the drive arm assembly for your Lippert Edge RV awning without LEDs. Includes both the drive head and the arm. Black color matches your existing awning.

• Accessories and Parts
• RV Awnings
• Arms
• Drive Arms
• Lippert

Replaces the mount for your Solera 3000 Series RV awning.

• Accessories and Parts
• RV Awnings
• Mounting Hardware
• Lippert

Replaces 1 3/8" x 1-11/32" pin needed for your Solera RV awning. Dacromet finish resists corrosion.

• Accessories and Parts
• RV Awnings
• Hardware
• Arms
• Pins
• Lippert

Replace a missing side plug on your Lippert Power Tongue Jack V2. Push-in rubber cover (1-3/8" OD) seals the jack-head opening to keep out water, dirt, and road grimerestoring full protection in seconds, no tools required.

• Accessories and Parts
• Trailer Jack
• Camper Jacks
• Caps
• Lippert

Electric ground supply and wiring harness connects to the controller, breaker, and battery of your Hall Effect leveling system.

• Accessories and Parts
• Camper Jacks
• Wiring Harness
• Lippert

A damaged harness can make your RV's leveling system unreliable. This 4-pin interface harness restores electrical connections, ensuring smooth jack operation. Designed for Lippert Level-Up systems, it's a easy fix to get you back to camping.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Wiring Harness
• Lippert

Lost or bent your extension rods? This replacement set gets your white Solera slide-out awning working like new again so you can get back to smooth RV living.

• Accessories and Parts
• RV Awnings
• Extension Rod
• White
• Lippert

Replaces the control board for your Lippert OneControl electric Travel Trailer RV leveling system (672136).

• Accessories and Parts
• Camper Jacks
• Controllers
• Control Panel
• Lippert

Use this Grade 5 flange nut with Grade 5 bolts (sold separately) to mount your Lippert components on your RV. Secures your steel or aluminum, manual pull-out Tread Lite steps or Ground Control 3.0 front jacks. Zinc plated to resist corrosion.

• Accessories and Parts
• Camper Jacks
• Hardware
• Nuts
• Lippert

This is the most convenient way to add LEDs to your RV awning: the light is pre-installed in a plastic strip and mounts to the wall. It's designed to get max brightness with minimal power, reflecting off the RV wall to fill the patio with light.

• Accessories and Parts
• RV Awnings
• Lights
• 16 Feet Long
• Strip Light
• Black
• Lippert

Replaces the motor assembly on your Lippert Coach RV steps.

• Accessories and Parts
• RV Steps
• Motors
• Lippert

Replaces your awning roller and fabric. Fits Solera 18' hybrid and power awnings with 8' extension. Installs more easily than replacing just the fabric. Integrated light track gives you the option to add an LED light kit to your awning.

• Accessories and Parts
• RV Awnings
• Fabric
• 18 Feet Wide
• Extends 8 Feet
• Sand Fade - White Strip
• Lippert

Worn brake hoses reduce stopping power. This DOT-approved Kodiak hose seals tight for leak-proof braking and resists rust for long-lasting performance. Dead swivel ends prevent twisting during installation. Works with any 3/16" brake lines.

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Disc Brakes
• 4 Feet Long
• Brake Lines
• Brake Line Components
• Kodiak

Replace the spacer on your Kodiak K71-2R-11-10D-DDDD disc brake kit. Designed for 11" rotors with an 8 on 6-1/2" bolt pattern and 5/8" studs, it restores fit and function for your 10,000-lb axle, keeping disc brakes working smoothly.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 10000 lbs
• Rotors
• Rotor Spacers
• Kodiak

Caliper-mounting bracket is designed for use with 11.6" hub-and-rotor assemblies that have an 8 on 6-1/2 bolt pattern and 5/8" wheel bolts. Works with dually applications and mounts on 7-bolt, 10,000-lb Dexter brake flanges.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 10000 lbs
• Hardware
• Caliper Parts
• Mounting Brackets
• Kodiak

Replaces 2 caliper retaining clips and 2 retaining clip bolts on your Kodiak DBC-338-HD calipers.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Caliper Parts
• Bolts
• Kodiak

This custom floor for your Kelty Late Start 4-person tent is like a bodyguard for your tent floor, blocking moisture and protecting against sharp rocks. Because nothing ruins a campout faster than getting soaked because your tent bottom leaks.

• Accessories and Parts
• Tents
• Tent Footprint
• Late Start
• Blue
• Kelty

Avoid slipping or falling while hiking with these rubber tips for your Kelty trekking poles. They slide over the tips to give your poles extra grip on rock or any other hard surface. They even reduce noise so you won't scare off wildlife.

• Accessories and Parts
• Trekking Poles
• Tip Protectors
• Kelty