New Arrivals

Cinch strap with an S-hook and closed webbing loop set-up secures two ramps to your vehicle while loading or unloading. Keeps your ramps in position despite shifting load weight distribution during use. Rated for 750-lb maximum load.

• Accessories and Parts
• ATV Ramps
• Trailer Ramps
• Car Ramps
• Truck Ramps
• Straps
• Erickson

Synthetic rope can be used replace an existing rope, or serve as a upgrade on some winches. The synthetic generates less kinetic energy than steel, protecting you and your equipment if a break occurs. Soft shackle end for versatile pull options.

• Accessories and Parts
• Electric Winch
• Ropes
• 3/8 Inch Diameter
• Synthetic Rope
• Erickson

Replaces one air bag for your Pacbrake Alpha HD Pro air suspension kit. Includes one double convoluted air bag with internal jounces and aluminum end caps.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Air Spring
• Alpha HD
• Pacbrake

This kit was designed specifically for 2017-2024 Ford F-250/F-350/F-450 Super Duty vehicles that are equipped with a rear sway bar or camper package to utilize a Pacbrake HP10401 / HP10401-J / HP10401-X / HP10401-X-J Air Spring kit (sold separately).

• Accessories and Parts
• Vehicle Suspension
• Retrofit Kit
• Pacbrake

Using your 12V HP625 compressor with an air tank? You'll need this unloader kit if you're piecing together your own onboard air setup. It protects your system from pressure backfeed and keeps things cycling smoothly.

• Accessories and Parts
• On Board Air Compressor
• Tire Inflator
• Vehicle Suspension
• Unloader Assembly
• Pacbrake

Tired of uneven loads or stiff rides? This tankless control kit lets you fine-tune each air spring from the cab with dual paddle valves, a chrome compressor, and easy-read gauges, so your truck rides right, every time.

• Accessories and Parts
• Air Bag Compressor Kit
• On Board Air Compressor
• Vehicle Suspension
• Air Compressor System
• 220 psi
• Wired Control
• Dual Path
• Pacbrake

Looking for simple, in-cab control of your air springs? This basic paddle valve kit connects to your existing air system and lets you inflate or deflate each spring independently with dual paddles and a built-in digital gauge.

• Accessories and Parts
• Vehicle Suspension
• Air Bag Compressor Kit
• On Board Air Compressor
• Air Compressor System
• 220 psi
• Wired Control
• Dual Path
• Pacbrake

Restores full control and monitoring of your Progressive Dynamics PD1600 Series RV inverter. Compatible with models PD1660, PD1670, and PD1680. Gives you back your access to your inverter without having to actually access the inverter.

• Accessories and Parts
• RV Power Inverter
• Remote Control
• Progressive Dynamics

This AC/DC distribution panel keeps your power systems easily accessible inside the RV. Provides space for up to 9 AC branch circuits and up to 12 fused DC branch circuits. 12 VDC input power terminal creates a connection point for battery/converter.

• Accessories and Parts
• RV Power Converter
• AC/DC Distribution Panel
• Progressive Dynamics

Need to replace the remote panel for your Progressive Dynamics PD1600 series inverter? This replacement restores full control and monitoring from up to 25 feet away no need to dig around behind your power system just to flip a switch.

• Accessories and Parts
• RV Power Inverter
• Remote Panel
• Progressive Dynamics

Replaces the rail clamps needed to secure your Pace Edwards UltraGroove Metal retractable hard tonneau cover (311-KRFA07A30). Includes clamps and mounting hardware.

• Accessories and Parts
• Tonneau Cover
• Clamps
• Pace Edwards UltraGroove
• Pace Edwards

Replaces the fabric panel without latch for your Pace Edwards Switchblade tonneau cover (SW2105).

• Accessories and Parts
• Tonneau Cover
• Panels
• Pace Edwards SwitchBlade
• Pace Edwards

Replaces the cover for your Pace Edwards JackRabbit truck bed cover (TR2032 and JRC3250). Rails and canister sold separately.

• Accessories and Parts
• Tonneau Cover
• Tarps
• Pace Edwards JackRabbit
• Pace Edwards

Replacing a damaged Switchblade cover? This metal replacement slat cover with vinyl overlay restores the sleek look and dependable protection of your Pace Edwards Switchblade or Switchblade Metal. Reuse your original rails, canister, and hardware.

• Accessories and Parts
• Tonneau Cover
• Tarps
• Pace Edwards SwitchBlade
• Pace Edwards

This kit upgrades your Pace Edwards tonneau cover rail clamps so you can add a kickstand (sold separately).

• Accessories and Parts
• Tonneau Cover
• Kickstand
• Pace Edwards BedLocker
• Pace Edwards SwitchBlade
• Pace Edwards JackRabbit
• Pace Edwards

Replaces the cover for your Pace Edwards JackRabbit hard tonneau cover (JRT3554).

• Accessories and Parts
• Tonneau Cover
• Tarps
• Pace Edwards JackRabbit
• Pace Edwards

The sun is blazing, but your battery isn't. This solar panel lets you harness the sun to recharge your CS Free, keeping your battery and devices powered so you're never stranded off-grid. Just unfold the panel, position it, and power up.

• Accessories and Parts
• Battery Charger
• Solar Kit
• CTEK Power Inc

You toss your charger on the fender, lean in to check connections, hear it slide, and hit the ground. This case keeps your charger secure with a durable, non-slip silicone shield, protecting it and your vehicle from scratches. No more slips or drops.

• Accessories and Parts
• Battery Charger
• Cases
• CTEK Power Inc

You go to charge your battery only to realize your charger won't reach. This extension cable gives you an extra 8' of flexibility, so you can position your charger where it works best. No more stretching cables or parking at odd angles.

• Accessories and Parts
• Battery Charger
• Cables
• Extension Cable
• CTEK Power Inc

You're off-grid, miles from the nearest outlet, and your vehicle's battery needs a charge. These clamps let you power your CS Free directly from a 12V service battery, so you're never stranded. Just clamp, plug in, and charge anywhere.

• Accessories and Parts
• Portable Chargers
• Battery Charger
• Clamps
• CTEK Power Inc

You're ready to ride, but is your battery? This eyelet cable gives you an instant read on your battery's health with a simple LED system. A quick glance tells you if it's good to go or needs a charge - before you're stuck.

• Accessories and Parts
• Battery Charger
• Cables
• Battery Indicator Cable
• CTEK Power Inc

Your CS Free is built for portability, but when you're home, you need a safe spot for it. This mount keeps your charger secure in your garage. Mount it permanently or hang it temporarily - either way, your charger is ready when you need it.

• Accessories and Parts
• Battery Charger
• Portable Chargers
• Mounting Hardware
• Mounting Panel
• CTEK Power Inc

Your charger is an essential tool, but where do you put it when you're working? This wall mount keeps your charger secure and within reach, whether mounted to a wall or hung on a vehicle door. It's just a smarter way to store your charger.

• Accessories and Parts
• Battery Charger
• Mounting Hardware
• Mounting Panel
• CTEK Power Inc

Your battery is out of sight, and now it's out of power. The indicator pigtail converts your SAE quick connector into a real-time battery monitor, so you always know when it's time to charge. The LEDs let you check your battery at a glance.

• Accessories and Parts
• Battery Charger
• Cables
• Battery Indicator Cable
• CTEK Power Inc