New Arrivals

Fine-tune your vehicle's ride height and balance with this durable 10mm-thick x 70mm-wide leaf trim packer, designed specifically for Old Man Emu leaf springs.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Spacers
• Leaf Trim Packer
• Old Man Emu

Confidently install your Old Man Emu leaf springs with this custom-fit bushing kit. Includes 6 bushings made of durable polyurethane and rubber to reduce squeaks and last longer. Each spring requires one kit, so order accordingly.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Bushings
• Old Man Emu

Wiring loom extension set up specifically for use with the Intensity V1 Light Bars. Add 16' to the primary harness (3500810 - sold separately) for alternative installations. Utilizes waterproof 2-pin DTP connectors.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Wiring Harness
• Extension
• ARB

Keep your Old Man Emu leaf springs in top condition with this custom-fit shackle kit. Zerk fittings simplify lubrication, reducing wear and noise. Designed for CS055R leaf springs, the kit includes two complete shackles.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• Shackles
• Old Man Emu

Confidently install your Old Man Emu leaf springs with this custom-fit bushing kit. Includes 4 bushings and 2 sleeves made of durable polyurethane and rubber to reduce squeaks and last longer. Each spring requires one kit, so order accordingly.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Bushings
• Old Man Emu

Mount your powerful LED light bar to a round bull bar or rack using this clamp kit. The kit integrates to the AR40's housing and features a security nut system to protect your investment. Installation hardware and security tool included.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Mounting Hardware
• Brackets
• Black Steel
• ARB

Confidently install your Old Man Emu leaf springs with this custom-fit replacement center bolt and nut. Each leaf spring requires 1 center bolt and nut.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• Bolts
• Old Man Emu

Protect your investment and add options to your light bar with these clip-on polycarbonate covers. Used on Slimline bars with spot or flood lights, this clear cover has minimal effect on lighting, while limiting impact damage. Sold as a pair.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Light Covers
• 9 Inch Long
• Clear
• ARB

Replace the clip liners on your Old Man Emu leaf spring to reduce friction and noise. These liners are custom-fit for your specific OME leaf spring so you know they will work perfectly. Includes 4 clip liners per package.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• Liners
• Old Man Emu

A worn upper strut bushing can cause clunking, vibration, and poor handling. This direct-fit replacement combines polyurethane and rubber to restore quiet performance and smooth suspension response as part of your OME system.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Bushings
• Old Man Emu

Lifting your rig can throw your axle off-center, especially in the rear. This extension bracket helps correct panhard rod angles - restoring axle alignment and handling when fitting an OME rod on a right-hand drive vehicle.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Brackets
• Extension Bracket
• Old Man Emu

Worn bushings cause clunking, poor handling, and alignment issues. If your suspension feels loose or noisy, replacing your bushings may bring back control, comfort, and confidence - without replacing major components.

• Accessories and Parts
• Vehicle Suspension
• Control Arms
• Bushings
• Old Man Emu

Replaces the mounting bracket for your ARB AR40 light bar. Proprietary mount integrates with AR40 Light Bar for installation on a flat surface.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Mounting Hardware
• Brackets
• ARB

Confidently install your Old Man Emu leaf springs with this custom-fit replacement center bolt and nut. Each leaf spring requires 1 center bolt and nut.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• Bolts
• Old Man Emu

Installing the OMESD48 steering stabilizer? This vehicle-specific mounting kit ensures a clean, secure fit, so your stabilizer performs like it should and keeps your steering under control, on- and off-road.

• Accessories and Parts
• Anti-Sway Bars
• Steering Stabilizer Parts
• Hardware
• Old Man Emu

Replaces the clear light cover on all ARB Solis 21 lights. Works with all ARB Solis 21 lights. Polycarbonate cover clips into place to protect your bezel and lens from impact.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Light Covers
• Clear
• ARB

Replace a lost or damaged bracket or install one in a second vehicle to easily transfer your Curt NEXT brake controller. The low-profile design installs above or below the dash and includes multiple mounting options for a secure, unobtrusive fit.

• Accessories and Parts
• Trailer Brake Controller
• Mounting Hardware
• Brackets
• CURT

For heavy-duty applications that require cable, this steel winch cable has a break strength of 5,600 lbs and a working load limit of 1,865 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 7/32 Inch Diameter
• 5600 lbs
• Wire Rope
• CURT

Mount your Blue Ox SwayPro weight distribution system with this heavy-duty shank. Designed for 2" hitches, this steel shank installs in either the rise or drop position and handles up to 15,000 lbs of trailer weight.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1400 lbs TW
• Fits 2 Inch Hitch
• Blue Ox

Maintain the charge of your towed car's battery from your coach or tow vehicle with this simple harness. 12V Power line with in-line charger connects to the 6-way or 7-way plug on your vehicle. Troubleshoot with the simple LED indicator.

• Accessories and Parts
• Flat Tow Wiring Harness
• Battery Charge Line Kit
• Blue Ox

Replacement head assembly works with Blue Ox SwayPro weight distribution systems for trailers with underslung couplers. Includes replacement hardware.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Blue Ox

If you need to disconnect the battery to flat tow your vehicle, you're going to want this kit. It disconnects your battery with the turn of a knob - much safer and faster than doing it yourself - while keeping your towing accessories charged.

• Accessories and Parts
• Flat Tow Wiring Harness
• Auto Battery Disconnect
• Blue Ox

Shank measures 12" long from the center of the hitch pin hole to the center of the adjustment holes. 7 Bolt holes let you adjust the height of your Blue Ox SwayPro weight distribution system. Fits 2" receivers. 850 lb tongue weight.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 700 lbs
• Fits 2 Inch Hitch
• Blue Ox

Shank measures 12" long from the center of the hitch pin hole to the center of the adjustment holes. 7 Bolt holes let you adjust the height of your Blue Ox TrackPro weight distribution system. Fits 2" receivers. 850 lb tongue weight.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 700 lbs
• Fits 2 Inch Hitch
• Blue Ox