New Arrivals

Replaces 1 fan blade for your MaxxAir fan. Fits all MaxxFan fan models.

• Accessories and Parts
• RV Vents and Fans
• Roof Vent
• Fan Blade
• MAXXAIR

This rope dampener hangs over your recovery line to prevent snapback if there's a failure in your Maxtrax rigging setup. The dual sleeves let you add weights, like rocks or sand, so the dampener can absorb the force if the line breaks.

• Accessories and Parts
• Electric Winch
• Rigging
• Rope Dampener
• Maxtrax

We curated this kit so you can recover a stuck vehicle from almost any distance. There is less risk of injury or gear damage since the ropes and shackles are made from a tough synthetic material that's stronger than steel and safer to use.

• Accessories and Parts
• Tow Straps and Recovery Straps
• Recovery Kit
• Standard Loops
• Extra Heavy Duty
• Maxtrax

Replaces the hinge pin for your MaxxAir MaxxFan lid.

• Accessories and Parts
• RV Vents and Fans
• Roof Vent
• Hardware
• Pins
• MAXXAIR

Replaces the cartridge valve for your Lippert Flow Max kitchen or bathroom faucet.

• Accessories and Parts
• RV Faucets
• Cartridge
• Lippert

Replaces the drive arm assembly for your Lippert Edge RV awning without LEDs. Includes both the drive head and the arm. Black color matches your existing awning.

• Accessories and Parts
• RV Awnings
• Arms
• Drive Arms
• Lippert

Replaces the mount for your Solera 3000 Series RV awning.

• Accessories and Parts
• RV Awnings
• Mounting Hardware
• Lippert

Replaces 1 3/8" x 1-11/32" pin needed for your Solera RV awning. Dacromet finish resists corrosion.

• Accessories and Parts
• RV Awnings
• Hardware
• Arms
• Pins
• Lippert

Replace a missing side plug on your Lippert Power Tongue Jack V2. Push-in rubber cover (1-3/8" OD) seals the jack-head opening to keep out water, dirt, and road grimerestoring full protection in seconds, no tools required.

• Accessories and Parts
• Trailer Jack
• Camper Jacks
• Caps
• Lippert

Electric ground supply and wiring harness connects to the controller, breaker, and battery of your Hall Effect leveling system.

• Accessories and Parts
• Camper Jacks
• Wiring Harness
• Lippert

A damaged harness can make your RV's leveling system unreliable. This 4-pin interface harness restores electrical connections, ensuring smooth jack operation. Designed for Lippert Level-Up systems, it's a easy fix to get you back to camping.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Wiring Harness
• Lippert

Lost or bent your extension rods? This replacement set gets your white Solera slide-out awning working like new again so you can get back to smooth RV living.

• Accessories and Parts
• RV Awnings
• Extension Rod
• White
• Lippert

Replaces the control board for your Lippert OneControl electric Travel Trailer RV leveling system (672136).

• Accessories and Parts
• Camper Jacks
• Controllers
• Control Panel
• Lippert

Use this Grade 5 flange nut with Grade 5 bolts (sold separately) to mount your Lippert components on your RV. Secures your steel or aluminum, manual pull-out Tread Lite steps or Ground Control 3.0 front jacks. Zinc plated to resist corrosion.

• Accessories and Parts
• Camper Jacks
• Hardware
• Nuts
• Lippert

This is the most convenient way to add LEDs to your RV awning: the light is pre-installed in a plastic strip and mounts to the wall. It's designed to get max brightness with minimal power, reflecting off the RV wall to fill the patio with light.

• Accessories and Parts
• RV Awnings
• Lights
• 16 Feet Long
• Strip Light
• Black
• Lippert

Replaces the motor assembly on your Lippert Coach RV steps.

• Accessories and Parts
• RV Steps
• Motors
• Lippert

For heavy-duty applications that require cable, this steel winch cable has a break strength of 4,200 lbs and a working load limit of 1,400 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 3/16 Inch Diameter
• 4200 lbs
• Wire Rope
• CURT

Replace a lost or damaged bracket or install one in a second vehicle to easily transfer your Curt NEXT brake controller. The low-profile design installs above or below the dash and includes multiple mounting options for a secure, unobtrusive fit.

• Accessories and Parts
• Trailer Brake Controller
• Mounting Hardware
• Brackets
• CURT

For heavy-duty applications that require cable, this steel winch cable has a break strength of 5,600 lbs and a working load limit of 1,865 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 7/32 Inch Diameter
• 5600 lbs
• Wire Rope
• CURT

Replace 2 worn or damaged backing plates on your single-axle trailer fender. Backing easily blocks water and road debris from hitting the side of your trailer.

• Accessories and Parts
• Trailer Fenders
• Fender Back
• CE Smith

Coupler repair kit contains all needed replacement parts for your CE Smith straight-tongue coupler with a 3,500-lb or 5,000-lb capacity, except for the coupler housing.

• Accessories and Parts
• Straight Tongue Trailer Coupler
• Coupler Repair
• CE Smith

Rustproof, durable aluminum bracket lets you mount a tail light to your trailer frame.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• Brackets
• CE Smith

Replace the spindle nuts, washers, and cotter pins on your axle shaft with this kit from CE Smith.

• Accessories and Parts
• Trailer Suspension Parts
• Trailer Axles
• Hardware
• Nuts
• CE Smith

These brackets let you mount your single-axle fenders with side steps to your trailer. Includes 2 bolt-on, galvanized brackets to mount one fender. Works with CE19502, CE19503, CE19504 fenders (sold separately).

• Accessories and Parts
• Trailer Fenders
• Mounting Hardware
• Brackets
• CE Smith