New Arrivals

Adjust the placement of your brake line and ABS bracket with the FK32 Relocation Kit, designed to accommodate Old Man Emu leaf springs CS055R. This kit ensures proper alignment and functionality after suspension modifications.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Relocation Kit
• Old Man Emu

Added gear can cause rear suspension sag, throwing off ride height and handling. A 10 mm coil spring packer levels your stance by compensating for uneven weight. Easy to install, it provides a subtle but effective lift for better balance and control.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Spring Supports
• Old Man Emu

This set of modular mounting brackets is built for your ARB Slimline light bar. Can be configured in 2 options for your Base rack, or set up to mount to any flat surface, like a bumper. Includes mounting hardware.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Mounting Hardware
• Brackets
• ARB

If your ARB bumper has a recessed fairlead mount, this spacer kit helps position your hawse fairlead correctly, so your winch line feeds cleanly and avoids rubbing on the bumper face.

• Accessories and Parts
• Bumper
• Spacers
• ARB

Replace the clip liners on your Old Man Emu leaf spring to reduce friction and noise. These liners are custom-fit for your specific OME leaf spring so you know they will work perfectly. Includes 4 clip liners per package.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Hardware
• Liners
• Old Man Emu

Confidently install your Old Man Emu leaf springs with this custom-fit bushing kit. Includes 1 metal sleeve and 6 bushings made of durable polyurethane and rubber to reduce squeaks and last longer. Each spring requires one kit, so order accordingly.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Bushings
• Old Man Emu

Confidently install your Old Man Emu leaf springs with this custom-fit replacement U-bolt kit, including 1 U-bolt, 2 washers, and 2 nuts. Most setups need 2 U-bolts per spring, so order accordingly if not reusing existing hardware.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• U-Bolts
• Old Man Emu

When you lift the rear of your rig, the sway bar can end up out of position. This rear sway bar link brings it back into proper alignment - helping you maintain stability and predictable handling on- and off-road.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• End Link
• Rear Anti-Sway Bar
• Old Man Emu

Reduce friction and prevent squeaking with SRBC60B interleaf liners for Old Man Emu Leaf Springs. These HDPE liners feature a short retention clip that is designed to be sandwiched securely between leaves, with contact on both sides.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Liners
• Old Man Emu

Replaces a spot beam light pod for your ARB Solis 21 light or Solis 21 light kit. 7" Round pod built for off-road driving in extreme conditions. Has universal pedestal mount and security hardware. 17-3/4" long, 4-pin AT connector.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Pod Light
• ARB

Replaces the wiring harness for the AR21 and AR32 round driving lights. Works with the ARB AR21 and AR32 lights. Full harness includes a driver's switch with an LED indicator, and all mounting hardware for up to 2 lights.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Wiring Harness
• ARB

Not running a winch? This fairlead cover panel bolts into place on your ARB Summit bumper to clean up the opening - protecting the fairlead mount and giving your bumper a finished, factory look.

• Accessories and Parts
• Bumper
• Winch Fairlead
• ARB

Confidently install your Old Man Emu leaf springs with the OMESB99 bushing kit. Includes 6 bushings and 1 metal sleeve for use with OE shackles. Compatible with CS016R, CS150R, and CS151R leaf springs. Each spring pack requires one bushing kit.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Bushings
• Old Man Emu

Replaces a flood beam light pod for your ARB V2 AR21 light or V2 AR21 light kit. 7" Round pod built for off-road driving in extreme conditions. Has universal pedestal mount and security hardware. 13" long, 2-pin DPT connector.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Pod Light
• ARB

Got lights but no good place to mount them? This ARB light bracket clamp gives you a solid, secure way to mount 35 mm round lamps to your ARB bumper, no guesswork.

• Accessories and Parts
• Bumper
• Mounting Hardware
• Light Mounting Brackets
• ARB

Use this helper spring spacer kit when adding a helper spring to your Old Man Emu leaf spring pack. Includes a 70mm x 1.3 mm spacer and HDPE liners to reduce friction, prevent hotspots, and ensure proper spacing for smooth and durable performance.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Spacers
• Helper Spring Spacer
• Old Man Emu

Replaces the wiring harness used with ARB Solis-series pod lights. Works with Solis 21 or Solis 36 lights. Equipped for 2 lights. Uses 4-pin AT connector.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Wiring Harness
• ARB

Worn bushings cause clunking, poor handling, and alignment issues. If your suspension feels loose or noisy, replacing your bushings may bring back control, comfort, and confidence - without replacing major components.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• Bushings
• Old Man Emu

When you bleed pressure just to swap tools or close a line, you lose time waiting for your compressor to recover. This in-line valve lets you shut things off with a quarter turn and hold pressure in the system so you can keep working.

• Accessories and Parts
• On Board Air Compressor
• Tire Inflator
• Vehicle Suspension
• Air Bag Compressor Kit
• Valves
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from a single 8-switch panel. Control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are tucked behind a fender or sit at a weird angle. This short, flexible hose gives you a little slack at the valve so you can connect the chuck without bending the main line or working at an awkward angle.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Some air chucks leak or pop off unless you hold them in place. This one pushes on and locks down so you can let go while the tire inflates. The internal shut-off keeps air in the system when it's not connected to a valve.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from your phone or the 8-switch panel. Bluetooth-enabled control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are buried deep or sit at the wrong angle for a standard chuck. This dual-head chuck with a flexible hose gives you the reach and angle you need to push the chuck onto the valve and fill the tire, even in tight spots.

• Accessories and Parts
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Vehicle Suspension
• Valves
• Air Chuck
• Bulldog Winch