New Arrivals

Added gear can cause rear suspension sag, throwing off ride height and handling. A 10 mm coil spring packer levels your stance by compensating for uneven weight. Easy to install, it provides a subtle but effective lift for better balance and control.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Spring Supports
• Old Man Emu

This set of modular mounting brackets is built for your ARB Slimline light bar. Can be configured in 2 options for your Base rack, or set up to mount to any flat surface, like a bumper. Includes mounting hardware.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Mounting Hardware
• Brackets
• ARB

If your ARB bumper has a recessed fairlead mount, this spacer kit helps position your hawse fairlead correctly, so your winch line feeds cleanly and avoids rubbing on the bumper face.

• Accessories and Parts
• Bumper
• Spacers
• ARB

Replace the clip liners on your Old Man Emu leaf spring to reduce friction and noise. These liners are custom-fit for your specific OME leaf spring so you know they will work perfectly. Includes 4 clip liners per package.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Hardware
• Liners
• Old Man Emu

Confidently install your Old Man Emu leaf springs with this custom-fit bushing kit. Includes 1 metal sleeve and 6 bushings made of durable polyurethane and rubber to reduce squeaks and last longer. Each spring requires one kit, so order accordingly.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Bushings
• Old Man Emu

Confidently install your Old Man Emu leaf springs with this custom-fit replacement U-bolt kit, including 1 U-bolt, 2 washers, and 2 nuts. Most setups need 2 U-bolts per spring, so order accordingly if not reusing existing hardware.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• U-Bolts
• Old Man Emu

When you lift the rear of your rig, the sway bar can end up out of position. This rear sway bar link brings it back into proper alignment - helping you maintain stability and predictable handling on- and off-road.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• End Link
• Rear Anti-Sway Bar
• Old Man Emu

Reduce friction and prevent squeaking with SRBC60B interleaf liners for Old Man Emu Leaf Springs. These HDPE liners feature a short retention clip that is designed to be sandwiched securely between leaves, with contact on both sides.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Liners
• Old Man Emu

Replaces a spot beam light pod for your ARB Solis 21 light or Solis 21 light kit. 7" Round pod built for off-road driving in extreme conditions. Has universal pedestal mount and security hardware. 17-3/4" long, 4-pin AT connector.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Pod Light
• ARB

Replaces the wiring harness for the AR21 and AR32 round driving lights. Works with the ARB AR21 and AR32 lights. Full harness includes a driver's switch with an LED indicator, and all mounting hardware for up to 2 lights.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Wiring Harness
• ARB

Installing the OMESD48 steering stabilizer? This vehicle-specific mounting kit ensures a clean, secure fit, so your stabilizer performs like it should and keeps your steering under control, on- and off-road.

• Accessories and Parts
• Anti-Sway Bars
• Steering Stabilizer Parts
• Hardware
• Old Man Emu

Replaces the clear light cover on all ARB Solis 21 lights. Works with all ARB Solis 21 lights. Polycarbonate cover clips into place to protect your bezel and lens from impact.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Light Covers
• Clear
• ARB

Confidently install your Old Man Emu leaf springs with this custom-fit bushing kit. Includes 1 metal sleeve and 6 bushings made of durable polyurethane and rubber to reduce squeaks and last longer. Each spring requires one kit, so order accordingly.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Bushings
• Old Man Emu

Front-end sag from added weight affects ride height and steering. A 10 mm coil spring packer restores balance by compensating for accessories like bumpers or winches. Easy to install, it provides a subtle lift for better handling and a level stance.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Spring Supports
• Old Man Emu

Protect your investment and add options to your light bar with these clip-on polycarbonate covers. Used on Slimline bars with spot or flood lights, the amber color adds contrast in fog or wet conditions, while limiting impact damage. Sold as a pair.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Light Covers
• 9 Inch Long
• Amber
• ARB

Confidently install your Old Man Emu leaf springs with this custom-fit replacement U-bolt kit, including 1 U-bolt, 2 washers, and 2 nuts. Most setups need 2 U-bolts per spring, so order accordingly if not reusing existing hardware.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• U-Bolts
• Old Man Emu

When you lift the front of your rig, the sway bar can end up out of position. This front sway bar link brings it back into proper alignment - helping you maintain stability and predictable handling on- and off-road.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• End Link
• Front Anti-Sway Bar
• Old Man Emu

Reduce friction and prevent squeaking with SRBC60A interleaf liners for Old Man Emu leaf springs. These HDPE liners snap into place and feature a long retention clip, ideal for bottom leaves, or long leaves with contact on one side only.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Liners
• Old Man Emu

Worn bushings cause clunking, poor handling, and alignment issues. If your suspension feels loose or noisy, replacing your bushings may bring back control, comfort, and confidence - without replacing major components.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• Bushings
• Old Man Emu

Lifting your suspension can create new clearance issues - like the front driveshaft getting too close to the sway bar or the rear sway bar limiting travel. This spacer kit solves both, giving your suspension room to work as it should.

• Accessories and Parts
• Anti-Sway Bars
• Spacers
• Rear Anti-Sway Bar
• Front Anti-Sway Bar
• Old Man Emu

Confidently install your Old Man Emu leaf springs with this custom-fit U-bolt kit, including 1 U-bolt, 2 washers, and 2 nuts. Most setups need 2 U-bolts per spring, so order accordingly if not reusing existing hardware.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• U-Bolts
• Old Man Emu

Added gear can cause rear suspension sag, throwing off ride height and handling. A 10 mm coil spring packer levels your stance by compensating for uneven weight. Easy to install, it provides a subtle but effective lift for better balance and control.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Spring Supports
• Old Man Emu

Lifting your rig can throw off sway bar angles and compromise handling. These front and rear sway bar links restore proper geometry, keeping your suspension stable and your sway bar doing its job on and off the road.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• End Link
• Rear Anti-Sway Bar
• Front Anti-Sway Bar
• Old Man Emu

Use this helper spring spacer kit when adding a helper spring to your Old Man Emu leaf spring pack. Includes a 60 mm x 3 mm spacer and HDPE liners to reduce friction, prevent hotspots, and ensure proper spacing for smooth and durable performance.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Spacers
• Helper Spring Spacer
• Old Man Emu