New Arrivals

Fuse kit contains 2 high-quality, 50-amp fuses with a protective holder. Works with Redarc TVMS Rogue (RED92RR) or Manager30 (RED88FR, RED93FR). Fuses protect your setup from potentially damaging overcurrent caused by short circuits or overloads.

• Accessories and Parts
• Smart RV
• Fuses
• Redarc

This bracket is designed to fit any vehicle's mounting points in the engine bay. Once mounted with the included hardware, it will help ensure your Redarc BCDC has airflow around it to keep it cool.

• Accessories and Parts
• Battery Charger
• Mounting Hardware
• Brackets
• Redarc

Wire loom allows you to connect your RedVision Total Vehicle Management System Prime to the existing sensors on your fresh-water tank.

• Accessories and Parts
• Smart RV
• Sensors
• Wiring
• Redarc

Expand your TVMS Rogue smart RV system with sensors for monitoring your holding tanks. Safe to use in with fresh water, waste water, or fuel tanks.

• Accessories and Parts
• Smart RV
• Sensors
• Redarc

Add this bracket to your 2022 or newer V6 Ford Ranger or Raptor to ensure your Redarc BCDC has plenty of airflow to keep it cool so it can keep your batteries charged. Mounts with included installation hardware.

• Accessories and Parts
• Battery Charger
• Mounting Hardware
• Brackets
• Redarc

Multipurpose cable lets you wire a solar panel with MC4 connectors to a solar charge controller with hardwire inputs. Also can be used for adding extra cable length to solar panels or connecting to chargers or battery management systems.

• Accessories and Parts
• Solar Charge Controllers
• Cables and Connectors
• Adapters
• Redarc

If your start battery and secondary battery are close to each other in your engine bay, this wiring kit gives you everything you need to make connections with your Redarc Alpha 25A DC battery charger.

• Accessories and Parts
• Battery Charger
• Cables
• Side-by-Side Wiring Cable
• Redarc

Got a rear-vehicle setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 21"4" apart. Made for the Redarc BCDC Alpha 50A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Replaces 1 of the custom-fit pads for your Rhino-Rack 2500 Series roof rack fit kit. Works for 2008 to 2016 Ford F-250 and F-350 Super Cab 4-door trucks.

• Accessories and Parts
• Roof Rack
• Tower Parts
• Pads
• Rhino Rack

Replaces 1 missing or damaged 70" Reconn-Deck bar for your Rhino-Rack Reconn-Deck truck bed rack.

• Accessories and Parts
• Ladder Racks
• Crossbars
• Rhino Rack

Missing the upper clamp on your Rhino-Rack multi-purpose holder? This replacement restores the grip you need to carry your skis, rods, or paddles safely. Just pop it in place and get your gear rack back in actionno need to replace the whole thing.

• Accessories and Parts
• Fishing Rod Holders
• Clamps
• Rhino Rack

These 5-mm thick Quick Mount spacers bolt to the tops of 4 legs to level a crossbar on your vehicle's roof.

• Accessories and Parts
• Roof Rack
• Crossbars
• Leg Spacers
• Rhino Rack

Replaces the lower bracket needed to install your Rhino-Rack fishing rod or ski carrier to your roof rack crossbars. Works with RR572, RR573, RR574, and RR576.

• Accessories and Parts
• Fishing Rod Holders
• Ski and Snowboard Racks
• Clamps
• Brackets
• Rhino Rack

Some jobs require a smoother approach. Maximize your HD Flatbed Ramps for easier, safer loading. Designed for professionals, these simple, easily managed extenders inspire confidence and commitment when loading a low-profile vehicle onto your truck.

• Accessories and Parts
• Car Ramps
• Ramp Extensions
• Race Ramps

Reduce the approach angle for your Portable Pit Stop and Restyler Ramps by making it smoother to load low-clearance vehicles. These foldable XTenders are easy to set up, and allow you to relax and feel confident while loading up and backing down.

• Accessories and Parts
• Car Ramps
• Ramp Extensions
• Race Ramps

Inner frame brackets let you mount your Reese Elite Series under-bed rails (30183 - sold separately) so you can attach your Reese Elite Series 5th wheel hitch. Hardware not included.

• Accessories and Parts
• 5th Wheel Hitch Rails
• Brackets
• Custom
• Reese

These 5-mm thick Quick Mount spacers bolt to the tops of 6 legs to level a crossbar on your vehicle's roof.

• Accessories and Parts
• Roof Rack
• Crossbars
• Leg Spacers
• Rhino Rack

Replaces 1 smart diode for tail lights with LEDs.

• Accessories and Parts
• Flat Tow Wiring Harness
• Diodes
• Roadmaster

Extends your safety cables by 22". Set of 2.

• Accessories and Parts
• Safety Cables
• Tow Bar
• Safety Cable Parts
• 8000 lbs GTW
• Loop Extensions
• Roadmaster

Replace the passenger-side LED strip on your Roadmaster kit 157 to restore bright brake and turn signals. The flexible 10-inch strip sticks on with 3M tape and the color-coded pigtail easily connects to the kit's wiring.

• Accessories and Parts
• Flat Tow Wiring Harness
• LED Strip
• Roadmaster

Replaces the passenger side female tube for the towbar side of your Roadmaster Tow Defender. Provides the attachement point for your passenger side baseplate connection bracket and the screen.

• Accessories and Parts
• Tow Bar
• Vehicle Guards
• Tube
• Tow Defender
• Roadmaster

Easily mount your new BrakeMaster supplemental braking system with this custom seat adapter. Bracket remains hidden beneath your vehicle's seat when not in use.

• Accessories and Parts
• Flat Tow Brake System
• Seat Adapter
• Roadmaster

Replaces a bushing sleeve for your Roadmaster anti-sway kit.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• Bushings
• Roadmaster

Replaces a bushing sleeve for your Roadmaster anti-sway bar. Works with 1109-174 and 1139-197 anti-sway bars. Includes 1 of the 4 required bushing sleeves.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• Bushings
• Roadmaster