New Arrivals

Replacement left/curb side jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Bolts on.

• Accessories and Parts
• Trailer Jack
• Legs
• etrailer

Designed to work with your etrailer scissor jacks, this unique socket is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. Works with 3/8" drill bits.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Tools
• Socket
• etrailer

Replacement right/street side jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Bolts on.

• Accessories and Parts
• Trailer Jack
• Legs
• etrailer

It's never been easier to protect your gear from the elements when you're not flat towing. Just slip this heavy-duty cover over your tow bar and snug it down with the adjustable straps. Easily fits your safety cables and power cord too!

• Accessories and Parts
• Tow Bar
• Covers and Storage
• Tow Bar Cover
• etrailer

If you're showing up to show out, why not add more color and style to your rock lights with another pair of diffused blue lights? Set the scene in and around your truck with this plug-and-play add-on kit. Includes M8 splitters and cables.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Rock Light
• Add-On Light
• Diode Dynamics

Replaces the clear white lens on your Stage Series rock light. Can also be used as an alternative to a diffused white lens, or for other colors so go wild! Lens snaps in place for easy installation.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Lens
• Diode Dynamics

Replace 1 rock light for your Diode Dynamics Stage Series single-color rock light kit. Includes 1 light with diffused green lens, prewired M8 connector, installation hardware, and 2 zip ties. Works with all Stage Series single-color rock light kits.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Rock Light
• Diode Dynamics

Replaces the diffused green lens on your Stage Series rock light. Can also be used as a replacement for other colors so go wild! Lens snaps in place for easy installation.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Lens
• Diode Dynamics

Attach your Stage Series rock light to any roll bar, bull bar, or tube up to 2-1/2" with this easy-to-install adapter. Simply screw the rock light onto the adapter, and secure the adapter to your roll bar or other tube with the included clamps.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Rock Light
• Mounting Hardware
• Diode Dynamics

Replaces the sealing gasket for your Diode Dynamics C1 LED light pod.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Gasket
• Diode Dynamics

Replaces the clear red lens on your Stage Series rock light. Can also be used as an alternative to a diffused red lens, or for other colors so go wild! Lens snaps in place for easy installation.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Lens
• Diode Dynamics

Add this slip hook to your 3/8", Grade 70 chain as a secure connector for tying down heavier cargo or equipment. After installing, you can clip the hook onto a fixed point on your equipment or trailer. Integrated, spring-loaded safety latch.

• Accessories and Parts
• Car Tie Down Straps
• Clevis Hooks
• 6600 lbs GTW
• Durabilt

This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• LH
• 10000 lbs
• 9000 lbs
• Brake Assembly
• 12-1/4 x 3-3/8 Inch Drum
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Protect your brakes from dust and grime with this dust shield. Works for your 12-1/4" X 2-1/2" brakes for 7.2K axles. The 4-hole mounting pattern makes it easy to install. Painted finish provides a level of corosion resistance.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• Electric Drum Brakes
• Dust Shield
• Dexter

This replacement inner member slide easily fits into the existing housing of your Dexter A-84 Series or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Replaces (1) 3-1/2" x 5/8"-18 Dexter Axle press-in wheel stud for 8K to 12K disc brakes or idler hubs with 5/8" studs.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Hubs and Drums
• Trailer Tires and Wheels
• Wheel Studs
• 5/8 Inch Diameter
• Drive-In Stud
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Replace or add a reverse lockout solenoid to your surge brake actuator from Dexter or Tie Down Engineering to keep the actuator from activating your trailer brakes when you shift into reverse.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• Solenoid
• Dexter

This hitch head assembly gives you 4" of extended shank to give you extra clearance for your tailgate, spare tire, and trailer accessories for easier hookup. Replaces the hitch head for your B&W Continuum weight distribution system.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Trunnion Bar
• B and W

Heat-treated, raw steel collar increases the height of your gooseneck ball on flat plate applications. 2" Tall collar works with B&W smooth shank ball HB94011 (sold separately). Weld-on installation.

• Accessories and Parts
• Trailer Hitch Ball
• Collar
• B and W

This hitch head has a 4" extended drop to ensure a level, stable tow for your lifted truck or low-riding trailer. Replaces the hitch head for your B&W Continuum weight distribution system.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Trunnion Bar
• B and W

Keep the ball platform on your Tow & Stow - or the head on your Continuum hitch - secure on the shank with this sturdy, new lock. Because it's B&W, we're sure the lock will not only be well-made, but awesome looking on your hitch too!

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Weight Distribution Hitch
• Locks
• Locking Pin
• B and W

COMING SOON! Lock down all the adjustment pins on your Tow & Stow so no one can take your hitch apart to try and steal your trailer. We saw this lock on display at the SEMA show, and it looks super-sleek - just like it's built into the hitch.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Locks
• Locking Pin
• B and W