New Arrivals

Multipurpose cable lets you wire a solar panel with Anderson connectors to a solar charge controller with hardwire inputs. Also can be used for adding extra cable length to solar panels, or connecting to chargers or battery management systems.

• Accessories and Parts
• Solar Charge Controllers
• Cables and Connectors
• Adapters
• Redarc

Got a mid-vehicle battery setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 14'9" apart. Made for the Redarc BCDC Alpha 25A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Need to get your PowerDock wired up for your next adventure? This kit makes it easy with color-coded cables, tough hardware, and room to customize. It's built for rough trails, so you can get set up and get going in no time!

• Accessories and Parts
• Portable Chargers
• Cables and Cords
• Redarc

Side mounts work with corner mounts (RED79VR - sold separately) to attach single or multiple Redarc solar panels to an RV or boat. Attach mount to surface using a silicon adhesive or common fasteners.

• Accessories and Parts
• RV Solar Panels
• Mounting Hardware
• Redarc

Got a rear-vehicle setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 21"4" apart. Made for the Redarc BCDC Alpha 25A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Beach, campsite, or worksite - take your adventures off-grid! This all-in-one kit makes connecting your PowerDock a cinch. Hook up solar panels, power up anywhere, and rely on rugged Aussie durability to tackle the wild.

• Accessories and Parts
• Portable Chargers
• Cables and Cords
• Redarc

Replaces 1 of the custom-fit pads for your Rhino-Rack 2500 Series roof rack fit kit. Works for 2008 to 2016 Ford F-250 and F-350 Super Cab 4-door trucks.

• Accessories and Parts
• Roof Rack
• Tower Parts
• Pads
• Rhino Rack

Replaces 1 missing or damaged 70" Reconn-Deck bar for your Rhino-Rack Reconn-Deck truck bed rack.

• Accessories and Parts
• Ladder Racks
• Crossbars
• Rhino Rack

Missing the upper clamp on your Rhino-Rack multi-purpose holder? This replacement restores the grip you need to carry your skis, rods, or paddles safely. Just pop it in place and get your gear rack back in actionno need to replace the whole thing.

• Accessories and Parts
• Fishing Rod Holders
• Clamps
• Rhino Rack

These 5-mm thick Quick Mount spacers bolt to the tops of 4 legs to level a crossbar on your vehicle's roof.

• Accessories and Parts
• Roof Rack
• Crossbars
• Leg Spacers
• Rhino Rack

Replaces the lower bracket needed to install your Rhino-Rack fishing rod or ski carrier to your roof rack crossbars. Works with RR572, RR573, RR574, and RR576.

• Accessories and Parts
• Fishing Rod Holders
• Ski and Snowboard Racks
• Clamps
• Brackets
• Rhino Rack

Need to replace missing or rusted hardware? This single black M6 x 40mm button-head security screws fits Rhino-Rack roof rack systems and accessories. Made from stainless steel to handle the elements and keep your gear locked in place.

• Accessories and Parts
• Roof Rack
• Hardware
• Screws
• Security Screw
• Rhino Rack

Some jobs require a smoother approach. Maximize your HD Flatbed Ramps for easier, safer loading. Designed for professionals, these simple, easily managed extenders inspire confidence and commitment when loading a low-profile vehicle onto your truck.

• Accessories and Parts
• Car Ramps
• Ramp Extensions
• Race Ramps

Reduce the approach angle for your Portable Pit Stop and Restyler Ramps by making it smoother to load low-clearance vehicles. These foldable XTenders are easy to set up, and allow you to relax and feel confident while loading up and backing down.

• Accessories and Parts
• Car Ramps
• Ramp Extensions
• Race Ramps

Get the perfect fit for your Rhino-Rack 2500 Series legs with these leg spacers. Designed to adjust bar height for a level load, this spacer enhances stability and weight distribution. It ensures a secure connection between your legs and crossbar.

• Accessories and Parts
• Roof Rack
• Crossbars
• Leg Spacers
• Rhino Rack

Replaces one air bag for your Pacbrake Alpha HD air suspension kit. Includes one double convoluted air bag with aluminum end caps.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Air Spring
• Alpha HD
• Pacbrake

Pacbrake's optional Remote Air Intake Kit for HP625 Series Compressors adds extra protection for compressors exposed to significant elements.

• Accessories and Parts
• On Board Air Compressor
• Vehicle Suspension
• Tire Inflator
• Remote Air Intake
• Pacbrake

Waiting on your compressor to catch up? Add this 5 gallon tank to store air and speed up your system. You'll get quicker response from your air springs or tools, plus fewer compressor cycles and smoother control when it counts.

• Accessories and Parts
• Vehicle Suspension
• Air Bag Compressor Kit
• On Board Air Compressor
• Tire Inflator
• Air Tank
• Pacbrake

Need more air on demand? This dual tank kit adds a full gallon of onboard storage to your Pacbrake air system—perfect for stabilizing your suspension, running air accessories, or just making your compressor work a little less.

• Accessories and Parts
• Air Bag Compressor Kit
• Vehicle Suspension
• On Board Air Compressor
• Tire Inflator
• Air Tank
• Pacbrake

Waiting on your compressor to catch up? Add this 5 gallon tank to store air and speed up your system. You'll get quicker response from your air springs or tools, plus fewer compressor cycles and smoother control when it counts.

• Accessories and Parts
• Vehicle Suspension
• Tire Inflator
• On Board Air Compressor
• Air Bag Compressor Kit
• Air Tank
• Pacbrake

Replaces one air bag for your Pacbrake Alpha SD air suspension kit. Includes one sleeve style air bag.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Air Spring
• Alpha SD
• Pacbrake

Mounting your wireless controller farther from the compressor? This 10ft extension harness gives you the flexibility to place your control board where it works best—no cutting, no hassle, just plug and go.

• Accessories and Parts
• Air Bag Compressor Kit
• Vehicle Suspension
• On Board Air Compressor
• Wiring
• Extension Kit
• Pacbrake

Using your 24V HP625 compressor with an air tank? You'll need this unloader kit if you're piecing together your own onboard air setup. It protects your system from pressure backfeed and keeps things cycling smoothly.

• Accessories and Parts
• Vehicle Suspension
• On Board Air Compressor
• Tire Inflator
• Unloader Assembly
• Pacbrake

Tired of getting out of your truck to adjust your air springs? This in-cab control kit makes it easy to inflate both bags at once, right from the dash — the perfect upgrade when you're ready to move beyond manual valves.

• Accessories and Parts
• Air Bag Compressor Kit
• Vehicle Suspension
• On Board Air Compressor
• Air Compressor System
• 220 psi
• Wired Control
• Single Path
• Pacbrake