New Arrivals

This screwdriver-like tool is required to disconnect hoses from your JR Products LP Gas Manifold.

• Accessories and Parts
• Propane Fittings
• Tools
• Manifold
• JR Products

Add extra sturdiness to a fold-out tray, slide-out camp kitchen, or portable table. Once installed, this table leg will fold flat against whatever you mount it to. Leg height adjusts in 1" increments from 22-1/2" up to 35-1/2"

• Accessories and Parts
• Camping Table
• Table Legs
• JR Products

Replace your RV's old or damaged awning roller and fabric with this heavy-duty assembly. Fits Edge and 2000 series 8' power awnings with a built-in LED strip. Installs more easily than replacing just the fabric.

• Accessories and Parts
• RV Awnings
• Fabric
• 8 Feet Wide
• Extends 7 Feet
• Black Fade
• Lippert

Replaces the OneControl Advantage controller with Bluetooth for your Lippert Level Up RV leveling system. Fits all Lippert Level Up leveling systems. Includes flat mounting brackets and hardware.

• Accessories and Parts
• Camper Jacks
• Controllers
• Control Module
• Lippert

A damaged harness can make your RV's leveling system unreliable. This 25' replacement restores electrical connections, helping your jacks work smoothly. Designed for Lippert Level-Up systems, it's a simple fix to get you back to camping.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Wiring Harness
• Lippert

Replaces the mounting hardware for your Lippert Solera RV slide-topper awning (LCV000168109).

• Accessories and Parts
• RV Awnings
• Mounting Hardware
• Lippert

Advantage 4-point Ground Control LCD electronics kit.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Controllers
• Control Panel
• Lippert

Replaces the electric steps, motor, and control unit for your Kwikee 47 Series RV step. Motor and control unit automatically extend and retract the steps when you open and close the door. Wiring pigtail hardwires to your RV's power.

• Accessories and Parts
• RV Steps
• Motors
• Control Module
• Steps
• Lippert

This kit includes the hardware for your Solera 2000 Series or Edge awning. The needed awning roller tubes and fabrics are sold separately. The 58" long arms offer sliding adjustable pitch. The wire is located at the bottom.

• Accessories and Parts
• RV Awnings
• Arms
• Pitch Arms
• Lippert

Replaces the cartridge valve for your Lippert Flow Max kitchen or bathroom faucet.

• Accessories and Parts
• RV Faucets
• Cartridge
• Lippert

Replaces the drive arm assembly for your Lippert Edge RV awning without LEDs. Includes both the drive head and the arm. Black color matches your existing awning.

• Accessories and Parts
• RV Awnings
• Arms
• Drive Arms
• Lippert

Replaces the mount for your Solera 3000 Series RV awning.

• Accessories and Parts
• RV Awnings
• Mounting Hardware
• Lippert

Worn brake hoses reduce stopping power. This DOT-approved Kodiak hose seals tight for leak-proof braking and resists rust for long-lasting performance. Dead swivel ends prevent twisting during installation. Works with any 3/16" brake lines.

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Disc Brakes
• 4 Feet Long
• Brake Lines
• Brake Line Components
• Kodiak

Replace the spacer on your Kodiak K71-2R-11-10D-DDDD disc brake kit. Designed for 11" rotors with an 8 on 6-1/2" bolt pattern and 5/8" studs, it restores fit and function for your 10,000-lb axle, keeping disc brakes working smoothly.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 10000 lbs
• Rotors
• Rotor Spacers
• Kodiak

Worn brake hoses reduce stopping power. This DOT-approved Kodiak hose seals tight for leak-proof braking and resists rust for long-lasting performance. Dead swivel ends prevent twisting during installation. Works with any 3/16" brake lines.

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Disc Brakes
• 26 Feet Long
• Brake Lines
• Brake Line Components
• Kodiak

Caliper-mounting bracket is designed for use with 11.6" hub-and-rotor assemblies that have an 8 on 6-1/2 bolt pattern and 5/8" wheel bolts. Works with dually applications and mounts on 7-bolt, 10,000-lb Dexter brake flanges.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 10000 lbs
• Hardware
• Caliper Parts
• Mounting Brackets
• Kodiak

Replaces 2 caliper retaining clips and 2 retaining clip bolts on your Kodiak DBC-338-HD calipers.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Caliper Parts
• Bolts
• Kodiak

This custom floor for your Kelty Late Start 4-person tent is like a bodyguard for your tent floor, blocking moisture and protecting against sharp rocks. Because nothing ruins a campout faster than getting soaked because your tent bottom leaks.

• Accessories and Parts
• Tents
• Tent Footprint
• Late Start
• Blue
• Kelty

Replaces the prop rod assembly on your Leer tri-fold tonneau cover (631303, 631105, 631286, and 631335) or quad-fold tonneau cover (650400, 650149, and 650320).

• Accessories and Parts
• Tonneau Cover
• Prop Rods
• Leer Tri-Fold
• Leer

Replace two 8mm lower wheel cradles on your Jack-IT Original Plus and other V-rack model bike racks. Supports the lower wheels on one bicycle.

• Accessories and Parts
• RV and Camper Bike Racks
• Cradle and Arm Parts
• Cradles
• Lets Go Aero

Plug for your Lionshead trailer wheel center cap (sold separately) snaps right into place. Removable plug provides easy access for hub maintenance on E-Z Lube axles.

• Accessories and Parts
• Trailer Tires and Wheels
• Boat Trailer Wheels
• Wheel Trim
• Center Cap Plug
• Fits 1-15/16 Inch Holes
• Black
• Lionshead

Keep your stuff safe and secure! This hitch lock set includes a dual locking pin and a locking hitch pin. Works with all Weigh Safe 2", 2-1/2", and 3" ball mounts with a 5/8" pin hole.

• Accessories and Parts
• Drop Hitch
• Trailer Hitch Ball Mount
• Locks
• Locking Pin
• Weigh Safe

Keep your stuff safe and secure! This trailer lock set has a padlock, an adjustable coupler latch lock, and an adjustable coupler ball lock. Works with all Weigh Safe 2", 2-1/2", and 3" ball mounts with a 5/8" pin hole.

• Accessories and Parts
• Drop Hitch
• Trailer Hitch Ball Mount
• Locks
• Locking Pin
• Weigh Safe

Only for use with 8.5K and 12.5K systems, this shank offers up to an 8" drop and an 8-1/2" rise for your Weigh Safe True Tow weight distribution hitch. Measures 11" long and fits 2" x 2" receivers.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1100 lbs TW
• Fits 2 Inch Hitch
• Square - 8 Inch Drop
• Square - 8 Inch Rise
• Weigh Safe