New Arrivals

Drop it, forget it, and stay put. This mushroom anchor grips muddy, sandy, and weedy bottoms, keeping your kayak or jon boat from drifting. With a wide, stable shape, it holds strong so you can relax.

• Boat Anchor
• Mushroom Anchor
• Grass
• Mud
• Sand
• Cast Iron
• Less Than 10 Feet Long
• YakGear

Perfect for paddlers, anglers, and small boat owners, this kit makes anchoring effortless. Whether you are fishing, snapping pics, or just relaxing, your vessel stays right where you want it, no drifting, no chasing.

• Boat Anchor
• Grapnel Anchor
• Mud
• Sand
• Galvanized Steel
• Less Than 10 Feet Long
• 30 Feet Long
• YakGear

Anchor down without the hassle. This floating stake-out stick anchors your kayak or small boat silently, no splashes, no drifting. Lightweight yet tough, it doubles as a push pole and is camera-mount compatible.

• Boat Anchor
• Stake-Out Stick
• YakGear

Perfect for paddlers, anglers, and small boat owners, this kit makes anchoring effortless. Whether you are fishing, snapping pics, or just relaxing, your vessel stays right where you want it, no drifting, no chasing.

• Boat Anchor
• Grapnel Anchor
• Mud
• Sand
• Galvanized Steel
• Less Than 10 Feet Long
• 30 Feet Long
• YakGear

Small but mighty, this anchor grabs onto sandy, rocky, and muddy bottoms to keep your kayak or canoe steady. With foldable tines for easy storage, it's tough, compact, and ready to hold strong wherever you drop it.

• Boat Anchor
• Grapnel Anchor
• Mud
• Sand
• Galvanized Steel
• Less Than 10 Feet Long
• YakGear

When you bleed pressure just to swap tools or close a line, you lose time waiting for your compressor to recover. This in-line valve lets you shut things off with a quarter turn and hold pressure in the system so you can keep working.

• Accessories and Parts
• On Board Air Compressor
• Tire Inflator
• Vehicle Suspension
• Air Bag Compressor Kit
• Valves
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from a single 8-switch panel. Control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are tucked behind a fender or sit at a weird angle. This short, flexible hose gives you a little slack at the valve so you can connect the chuck without bending the main line or working at an awkward angle.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Some air chucks leak or pop off unless you hold them in place. This one pushes on and locks down so you can let go while the tire inflates. The internal shut-off keeps air in the system when it's not connected to a valve.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from your phone or the 8-switch panel. Bluetooth-enabled control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are buried deep or sit at the wrong angle for a standard chuck. This dual-head chuck with a flexible hose gives you the reach and angle you need to push the chuck onto the valve and fill the tire, even in tight spots.

• Accessories and Parts
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Vehicle Suspension
• Valves
• Air Chuck
• Bulldog Winch

Make it easier to reach your winch control plug with a 3' extension cord. Lets you plug in your wired controller even if your winch is mounted in a hard to reach location.

• Accessories and Parts
• Electric Winch
• Wiring
• Extension
• Plugs
• Bulldog Winch

You've got a compressor mounted in your truck or set up in the shop, so you're not about to move it. This hose lets you air up tires or run pneumatic tools up to 30 feet away. Works with most compressors using 1/4" connections.

• Accessories and Parts
• Vehicle Suspension
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Air Compressor Parts
• Hoses
• Bulldog Winch

Repairs the latching mechanism in your BedSlide truck bed slide. Works with all BedSlides made between 2010 and 2013. Kit includes 2 lock pins, 2 springs, 2 hairpin clips, and instructions.

• Accessories and Parts
• Truck Bed Slide
• Latches
• BedSlide

Replaces the spring bar for your Curt TruTrack 4P trailer-mounted weight distribution system (17520).

• Accessories and Parts
• Weight Distribution Hitch
• Spring Bars
• Square Bar
• CURT

This hitch head assembly gives you 4" of extended shank to give you extra clearance for your tailgate, spare tire, and trailer accessories for easier hookup. Replaces the hitch head for your B&W Continuum weight distribution system.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Trunnion Bar
• B and W

Replaces the rocker power switch on Nautilus water control panels. White switch body matches panel color. Red switch cover illuminates when switched on.

• Accessories and Parts
• Smart RV
• Switches
• B and B Molders

Add this heavy-duty camera to your Brandmotion monitor and improve your driving experience. Get a wide, clear view, parking lines, and low-light vision, so you always know what's behind you, whether you're at the job site or the campground.

• Accessories and Parts
• Backup Camera
• Camera
• Standard Camera
• Brandmotion

Replaces the harness for your Brandmotion SummitView camera system.

• Accessories and Parts
• Backup Camera
• Wiring
• Wiring Harness
• Brandmotion

If your GM's factory wireless charger won't work with your iPhone 8 or iPhone X, this kit replaces the original module so you can charge by simply placing your phone on the factory mat. You get reliable charging while you drive.

• Accessories and Parts
• Portable Chargers
• Repair Kit
• Brandmotion

Replaces the bracket for your Brandmotion FullVUE Mirror Vision System.

• Accessories and Parts
• Backup Camera
• Mounting Hardware
• Brackets
• Brandmotion

Replaces the camera for your Brandmotion SummitView camera system.

• Accessories and Parts
• Backup Camera
• Camera
• Standard Camera
• Brandmotion

You lost your rear factory camera when you removed the tailgate, but you don't have to give up safety. This camera mounts on your license plate and plugs into your truck's harness to bring that view back to your screen when you back up.

• Accessories and Parts
• Backup Camera
• Wiring
• Camera
• Tailgate Handle Camera
• Wiring Harness
• Brandmotion

Replaces the water pump switch for B&B RV Nautilus P3 or P4 panel water management panel. Replaces faulty switch on the Nautilus panel face. Includes single switch with 3-way wiring connectors.

• Accessories and Parts
• Smart RV
• Lights
• B and B Molders