Replaces the weld-on adjustable channel bracket for your Brophy lunette ring with 5-position adjustable channel (DBX5). Also works with ball couplers AC2B and AC3B.
Mount your pintle hitch to a plate with these 4-1/2" x 2" Grade 8 cap screws, nuts, and heavy-duty lock washers. Designed for use with Brophy pintle mounts.
Quickly and easily connect your safety chain to your trailer hitch. Durable, zinc-coated, Grade 80 steel construction. Hammerlock coupling link works with 3/8" chains. 7,000-lb Load limit.
When you bleed pressure just to swap tools or close a line, you lose time waiting for your compressor to recover. This in-line valve lets you shut things off with a quarter turn and hold pressure in the system so you can keep working.
Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from a single 8-switch panel. Control box mounts under the hood and powers switch panel via the included wiring harness.
Some valve stems are tucked behind a fender or sit at a weird angle. This short, flexible hose gives you a little slack at the valve so you can connect the chuck without bending the main line or working at an awkward angle.
Some air chucks leak or pop off unless you hold them in place. This one pushes on and locks down so you can let go while the tire inflates. The internal shut-off keeps air in the system when it's not connected to a valve.
Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from your phone or the 8-switch panel. Bluetooth-enabled control box mounts under the hood and powers switch panel via the included wiring harness.
Some valve stems are buried deep or sit at the wrong angle for a standard chuck. This dual-head chuck with a flexible hose gives you the reach and angle you need to push the chuck onto the valve and fill the tire, even in tight spots.
Make it easier to reach your winch control plug with a 3' extension cord. Lets you plug in your wired controller even if your winch is mounted in a hard to reach location.
You've got a compressor mounted in your truck or set up in the shop, so you're not about to move it. This hose lets you air up tires or run pneumatic tools up to 30 feet away. Works with most compressors using 1/4" connections.
Repairs the latching mechanism in your BedSlide truck bed slide. Works with all BedSlides made between 2010 and 2013. Kit includes 2 lock pins, 2 springs, 2 hairpin clips, and instructions.
Replaces the spacer bracket for installing diverter control handles on your B&B RV Nautilus P3 or P4 panel. Spans the distance from the valve to the back of the panel for added support and smooth operation.
Add this heavy-duty camera to your Brandmotion monitor and improve your driving experience. Get a wide, clear view, parking lines, and low-light vision, so you always know what's behind you. Plus, the low-profile design is less obtrusive.
You're capping off the pipe where the sewer hose is stored. The old one's gone or doesn't stay on. This one presses in for a snug, secure fit. It's a direct OEM match made to seal it off and keep things in place.
You're getting ready to fill your fresh tank and realize the cap's missing. Again. This replacement screws in where the old one was and stays put with the attached strap. One less thing to lose every time you fill up.
Add this dash cam to your Brandmotion system for instant front-facing coverage on your work truck. Clear video and low-light vision keep you protected, so you always have the road ahead on record, no matter where the job takes you.
You want a better view behind you, but you're not looking to add an extra screen inside your vehicle. This rear view mirror upgrade gives you a crisp, LCD backup camera display right on the mirror. Just add your own camera, and you're set.