New Arrivals

When you bleed pressure just to swap tools or close a line, you lose time waiting for your compressor to recover. This in-line valve lets you shut things off with a quarter turn and hold pressure in the system so you can keep working.

• Accessories and Parts
• On Board Air Compressor
• Tire Inflator
• Vehicle Suspension
• Air Bag Compressor Kit
• Valves
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from a single 8-switch panel. Control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are tucked behind a fender or sit at a weird angle. This short, flexible hose gives you a little slack at the valve so you can connect the chuck without bending the main line or working at an awkward angle.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Some air chucks leak or pop off unless you hold them in place. This one pushes on and locks down so you can let go while the tire inflates. The internal shut-off keeps air in the system when it's not connected to a valve.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from your phone or the 8-switch panel. Bluetooth-enabled control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are buried deep or sit at the wrong angle for a standard chuck. This dual-head chuck with a flexible hose gives you the reach and angle you need to push the chuck onto the valve and fill the tire, even in tight spots.

• Accessories and Parts
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Vehicle Suspension
• Valves
• Air Chuck
• Bulldog Winch

Make it easier to reach your winch control plug with a 3' extension cord. Lets you plug in your wired controller even if your winch is mounted in a hard to reach location.

• Accessories and Parts
• Electric Winch
• Wiring
• Extension
• Plugs
• Bulldog Winch

You've got a compressor mounted in your truck or set up in the shop, so you're not about to move it. This hose lets you air up tires or run pneumatic tools up to 30 feet away. Works with most compressors using 1/4" connections.

• Accessories and Parts
• Vehicle Suspension
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Air Compressor Parts
• Hoses
• Bulldog Winch

Repairs the latching mechanism in your BedSlide truck bed slide. Works with all BedSlides made between 2010 and 2013. Kit includes 2 lock pins, 2 springs, 2 hairpin clips, and instructions.

• Accessories and Parts
• Truck Bed Slide
• Latches
• BedSlide

Replaces the dust caps for your Blue Ox locks. Includes 5 dust caps.

• Accessories and Parts
• Trailer Hitch Lock
• Lock Cover
• Blue Ox

Replacement head assembly works with Blue Ox standard SwayPro weight distribution systems. Includes replacement hardware.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Blue Ox

Replacement head assembly works with Blue Ox standard TrackPro weight distribution systems. Includes replacement hardware.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Blue Ox

Replace the brake claw on your Blue Ox Patriot supplemental braking system (BRK2022).

• Accessories and Parts
• Flat Tow Brake System
• Pedal Clamp
• Claws
• Blue Ox

Maintain the charge of your towed car's battery from your coach or tow vehicle with this simple harness. 12V Power line with in-line charger connects to the 6-way or 7-way plug on your vehicle. Troubleshoot with the simple LED indicator.

• Accessories and Parts
• Flat Tow Wiring Harness
• Battery Charge Line Kit
• Blue Ox

Replacement head assembly works with Blue Ox SwayPro weight distribution systems for trailers with underslung couplers. Includes replacement hardware.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Blue Ox

If you need to disconnect the battery to flat tow your vehicle, you're going to want this kit. It disconnects your battery with the turn of a knob - much safer and faster than doing it yourself - while keeping your towing accessories charged.

• Accessories and Parts
• Flat Tow Wiring Harness
• Auto Battery Disconnect
• Blue Ox

Shank measures 12" long from the center of the hitch pin hole to the center of the adjustment holes. 7 Bolt holes let you adjust the height of your Blue Ox SwayPro weight distribution system. Fits 2" receivers. 850 lb tongue weight.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 700 lbs
• Fits 2 Inch Hitch
• Blue Ox

This SAE to alligator clamps cable connects your 12V battery to your SAE power cable. Works with any 12V accessory that has a SAE connector on its power cord.

• Accessories and Parts
• Tire Inflator
• Adapters
• Clamps
• Air Lift

Replaces the hardware and mounting brackets needed to install your Aries Automotive grille guard (AA9046).

• Accessories and Parts
• Grille Guards
• Installation Kits
• Aries Automotive

Busted your running board? This replacement passenger's-side board fits your Aries ActionTrac kit (AA3025179), getting your step system working like new. Installs using your existing brackets and wiring - no need to start from scratch.

• Accessories and Parts
• Nerf Bars - Running Boards
• Running Board
• Aries Automotive

Replace a worn or damaged handle on your Aries aluminum tube doors. This paddle-style handle is a direct replacement for your Jeep doors (AA1500200). Mounting hardware included for easy install. Durable black finish matches factory style.

• Accessories and Parts
• Jeep Doors
• Handle Assembly
• Aries Automotive

Busted your running board? This replacement driver's-side board fits your Aries ActionTrac kit (AA3025179), getting your step system working like new. Installs using your existing brackets and wiring - no need to start from scratch.

• Accessories and Parts
• Nerf Bars - Running Boards
• Running Board
• Aries Automotive

These custom-fit brackets let you mount Aries AdvantEdge, RidgeStep, or AscentSteps with zero drilling. Heavy-duty carbon steel is powder-coated for lasting durability. Bolt them on and swap running boards easily with the modular VersaTrac system.

• Accessories and Parts
• Nerf Bars - Running Boards
• Installation Kits
• Aries Automotive

Swapping out busted or missing hardware? This kit gives you everything you need to reinstall your Aries 3" nerf bars (AA205031 or AA205031-2) like a pro. No guesswork, no fuss.

• Accessories and Parts
• Nerf Bars - Running Boards
• Installation Kits
• Aries Automotive