New Arrivals

Replaces the hardware for your Benton LittleShift bike rack (B54FR).

• Accessories and Parts
• Hitch Bike Racks
• Hardware
• LittleShift
• Benton

When you bleed pressure just to swap tools or close a line, you lose time waiting for your compressor to recover. This in-line valve lets you shut things off with a quarter turn and hold pressure in the system so you can keep working.

• Accessories and Parts
• On Board Air Compressor
• Tire Inflator
• Vehicle Suspension
• Air Bag Compressor Kit
• Valves
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from a single 8-switch panel. Control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are tucked behind a fender or sit at a weird angle. This short, flexible hose gives you a little slack at the valve so you can connect the chuck without bending the main line or working at an awkward angle.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Some air chucks leak or pop off unless you hold them in place. This one pushes on and locks down so you can let go while the tire inflates. The internal shut-off keeps air in the system when it's not connected to a valve.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from your phone or the 8-switch panel. Bluetooth-enabled control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are buried deep or sit at the wrong angle for a standard chuck. This dual-head chuck with a flexible hose gives you the reach and angle you need to push the chuck onto the valve and fill the tire, even in tight spots.

• Accessories and Parts
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Vehicle Suspension
• Valves
• Air Chuck
• Bulldog Winch

Make it easier to reach your winch control plug with a 3' extension cord. Lets you plug in your wired controller even if your winch is mounted in a hard to reach location.

• Accessories and Parts
• Electric Winch
• Wiring
• Extension
• Plugs
• Bulldog Winch

You've got a compressor mounted in your truck or set up in the shop, so you're not about to move it. This hose lets you air up tires or run pneumatic tools up to 30 feet away. Works with most compressors using 1/4" connections.

• Accessories and Parts
• Vehicle Suspension
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Air Compressor Parts
• Hoses
• Bulldog Winch

This SAE to alligator clamps cable connects your 12V battery to your SAE power cable. Works with any 12V accessory that has a SAE connector on its power cord.

• Accessories and Parts
• Tire Inflator
• Adapters
• Clamps
• Air Lift

Confidently install your Old Man Emu leaf springs with this custom-fit replacement U-bolt kit, including 1 U-bolt, 2 washers, and 2 nuts. Most setups need 2 U-bolts per spring, so order accordingly if not reusing existing hardware.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Hardware
• U-Bolts
• Old Man Emu

Worn bushings cause clunking, poor handling, and alignment issues. If your suspension feels loose or noisy, replacing your bushings may bring back control, comfort, and confidence - without replacing major components.

• Accessories and Parts
• Vehicle Suspension
• Control Arms
• Bushings
• Old Man Emu

Protect your investment and add options to your Intensity V2 driving lights with clip-on polycarbonate covers. Used with round spot or flood lights, the amber color adds contrast in fog or wet conditions, while limiting impact damage. Sold as a pair.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Light Covers
• Amber
• ARB

You've got the compressor, now you need a smart place to mount it. This bolt-on bracket tucks your ARB air compressor neatly under the hood of your Ford Bronco, with room for switches, manifold, and all the trail-day essentials.

• Accessories and Parts
• On Board Air Compressor
• Tire Inflator
• Mounting Hardware
• Brackets
• ARB

Added gear can cause rear suspension sag, throwing off ride height and handling. A 5 mm coil spring packer levels your stance by compensating for uneven weight. Easy to install, it provides a subtle but effective lift for better balance and control.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Spring Supports
• Old Man Emu

Simplify installation of Old Man Emu leaf springs on your truck with the FK91 replacement mounting bolt. Designed for the driver's side front mount, this kit eliminates the need to lower the gas tank by replacing the OE mounting bolt.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Hardware
• Bolts
• Old Man Emu

Replaces a spot beam light pod for your ARB Solis 36 light or Solis 36 light kit. 7" Round pod built for off-road driving in extreme conditions. Has universal pedestal mount and security hardware. 17-3/4" long, 4-pin AT connector.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Pod Light
• ARB

Mounting a WARN winch on your ARB bumper 3413050, 3432080, 3430020, or 3411050? If the spacings off, your install can stall. This spacer kit gives you the clearance you need to mount your winch cleanly and keep your build moving forward.

• Accessories and Parts
• Bumper
• Spacers
• ARB

Fine-tune your vehicle's ride height and balance with this durable 10mm-thick x 70mm-wide leaf trim packer, designed specifically for Old Man Emu leaf springs.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Spacers
• Leaf Trim Packer
• Old Man Emu

Confidently install your Old Man Emu leaf springs with this custom-fit bushing kit. Includes 6 bushings made of durable polyurethane and rubber to reduce squeaks and last longer. Each spring requires one kit, so order accordingly.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Bushings
• Old Man Emu

Wiring loom extension set up specifically for use with the Intensity V1 Light Bars. Add 16' to the primary harness (3500810 - sold separately) for alternative installations. Utilizes waterproof 2-pin DTP connectors.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Wiring Harness
• Extension
• ARB

Keep your Old Man Emu leaf springs in top condition with this custom-fit shackle kit. Zerk fittings simplify lubrication, reducing wear and noise. Designed for CS055R leaf springs, the kit includes two complete shackles.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• Shackles
• Old Man Emu

Confidently install your Old Man Emu leaf springs with this custom-fit bushing kit. Includes 4 bushings and 2 sleeves made of durable polyurethane and rubber to reduce squeaks and last longer. Each spring requires one kit, so order accordingly.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Bushings
• Old Man Emu

Mount your powerful LED light bar to a round bull bar or rack using this clamp kit. The kit integrates to the AR40's housing and features a security nut system to protect your investment. Installation hardware and security tool included.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Mounting Hardware
• Brackets
• Black Steel
• ARB