New Arrivals

Keep your Old Man Emu leaf springs performing their best with this custom-fit shackle kit. Greasable shackles with zerk fittings reduce wear and noise. Designed for EL120R and EL121R leaf springs, the kit includes two complete shackles.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Hardware
• Shackles
• Old Man Emu

Noticed your ride sitting uneven? A spring trim packer fine-tunes height to fix side-to-side lean or front-to-back rake. It offsets added weight from accessories and installs easily for a subtle but effective fix restoring balance and control.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Spring Supports
• Old Man Emu

Mounting a winch to your ARB Summit bumper with a textured matte black finish? This kit includes the hardware you need for a secure, properly aligned install - so you're ready for recovery without the guesswork.

• Accessories and Parts
• Bumper
• Mounting Hardware
• Winch
• ARB

Replaces a spot beam light pod for your ARB V2 AR32 light or V2 AR32 light kit. 9" Round pod built for off-road driving in extreme conditions. Has universal pedestal mount and security hardware. 13" long, 2-pin DPT connector.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Pod Light
• ARB

Missing clamps or worn-out brackets can leave your side rails looseor worse, unusable. This 4-pack of ARB side rail clamps gives you the hardware you need to secure your side steps or rails with confidence.

• Accessories and Parts
• Bumper
• Nerf Bars - Running Boards
• Bracket Covers
• ARB

Fog light burned out? Don't get stuck in the dark. This spare bulb is a direct replacement for ARB Fog Light Kit 6821201 - keeping your lighting system ready for the next foggy drive or trail run.

• Accessories and Parts
• Bumper
• Light Kit
• ARB

Worn bushings cause clunking, poor handling, and alignment issues. If your suspension feels loose or noisy, replacing your bushings may bring back control, comfort, and confidence - without replacing major components.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• Bushings
• Old Man Emu

Worn bushings cause clunking, poor handling, and alignment issues. If your suspension feels loose or noisy, replacing your bushings may bring back control, comfort, and confidence - without replacing major components.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• Bushings
• Old Man Emu

Protect your investment and add options to your Intensity V2 Solis driving lights with clip-on polycarbonate covers. Used with spot or flood lights, this black cover blocks light transmission, while limiting impact damage. 1 Cover.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Light Covers
• Blackout
• Black
• ARB

Worn bushings cause clunking, poor handling, and alignment issues. If your suspension feels loose or noisy, replacing your bushings may bring back control, comfort, and confidence - without replacing major components.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• Bushings
• Old Man Emu

Protect your investment and add options to your Intensity V2 driving lights with clip-on polycarbonate covers. Used with round spot or flood lights, this black cover blocks light transmission, while limiting impact damage. Sold as a pair.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Light Covers
• Blackout
• ARB

Struggling with the install of you OME nitrocharger shocks on your Dodge Ram 1500? This handy tool helps you reach in that tight space.

• Accessories and Parts
• Vehicle Suspension
• Installation Tool
• Old Man Emu

Front-end sag from added weight affects ride height and steering. A 10 mm coil spring packer restores balance by compensating for accessories like bumpers or winches. Easy to install, it provides a subtle lift for better handling and a level stance.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Spring Supports
• Old Man Emu

Hi-Lift jacks can be sketchy without a stable mounting point. This adapter gives you a safe, secure lift spot when used with compatible ARB bumpers so you're not stuck improvising on uneven ground.

• Accessories and Parts
• Bumper
• Jack Adapter
• ARB

Fine-tune your vehicle's ride height and balance with this durable 10mm-thick x 60mm-wide leaf trim packer, designed specifically for Old Man Emu leaf springs.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Spacers
• Leaf Trim Packer
• Old Man Emu

Confidently install your Old Man Emu leaf springs with this custom-fit bushing kit. Includes 1 metal sleeve and 6 bushings made of durable polyurethane and rubber to reduce squeaks and last longer. Each spring requires one kit, so order accordingly.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Bushings
• Old Man Emu

Replaces the wiring harness used with the ARB Intensity V2 AR40 light bar. Designed to handle the high power load of the AR40. Equipped with a 2-pin DTP connector.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Wiring Harness
• ARB

Worn bushings cause clunking, poor handling, and alignment issues. If your suspension feels loose or noisy, replacing your bushings may bring back control, comfort, and confidence - without replacing major components.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• Bushings
• Old Man Emu

Confidently install your Old Man Emu leaf springs with this custom-fit replacement U-bolt kit, including 1 U-bolt, 2 washers, and 2 nuts. Most setups need 2 U-bolts per spring, so order accordingly if not reusing existing hardware.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• U-Bolts
• Old Man Emu

Mount your powerful LED light bar to a bull or round rack bar using this clamp kit. The kit integrates to the AR40's housing and features a security nut system to protect your investment. Installation hardware and security tool included.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Mounting Hardware
• Brackets
• Black Steel
• ARB

Confidently install your Old Man Emu leaf springs with this custom-fit replacement center bolt and nut. Each leaf spring requires 1 center bolt and nut.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Hardware
• Bolts
• Old Man Emu

Replaces a 22 combo beam light bar for your ARB V2 AR40 light bar or V2 AR40 light kit. Supremely effective light bar built for off-road driving in extreme conditions. 15-3/4" long, 2-pin DTP connector.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Light Bars
• ARB

Factory radar systems don't always line up with aftermarket bumpers. This relocation kit moves the forward collision sensor into the right position when fitting ARB bumper 3450420 - so your safety features stay functional without compromise.

• Accessories and Parts
• Bumper
• Relocation Kit
• ARB

If your bumper has cutouts but no lights, you're missing both style and visibility. These 51-watt halogen fog lights fill out your ARB bumper and cut through fog, mist, and dark roads when the weather turns bad.

• Accessories and Parts
• Bumper
• Light Kit
• ARB