New Arrivals

Replaces the 2-5/16" and 2" combo hitch ball for your Andersen EZ heavy-duty adjustable ball mount or weight distribution system. Includes combo ball and 2 pins and clips.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Balls
• Dual Ball
• 2 Inch Ball
• 2-5/16 Inch Ball
• Andersen

This tire change kit makes swapping out a flat on your multi-axle trailer a total breeze. Just drive the good tire up onto the leveler to raise the adjacent tire up to 4" off the ground. You will be back on the road in no time.

• Wheel Chocks
• Accessories and Parts
• Trailer Tires and Wheels
• Tire Change Jack
• Andersen

Need more slack in your Andersen weight-distribution tension chains? Add up to 11-1/4" instantly with these extensions6 links plus a threaded coupler per side. Remove any links you dont need for a custom fit and smoother hitch setup.

• Accessories and Parts
• Weight Distribution Hitch
• Chains
• Andersen

You're lining up the fifth wheel, solo in the driveway, no spotter this time. With one try, it clicks into place. You step out, check the connection, and smile. That funnel did exactly what it promised.

• Accessories and Parts
• 5th Wheel Hitch
• Gooseneck Coupler Adapter
• Andersen

This SAE to alligator clamps cable connects your 12V battery to your SAE power cable. Works with any 12V accessory that has a SAE connector on its power cord.

• Accessories and Parts
• Tire Inflator
• Adapters
• Clamps
• Air Lift

Coming soon - available February 2025. You'll need this air distribution box if you're upgrading your RV's AC to a 2025 ductless system with the new R32 refrigerant. The new ACs will not work with any systems from 2024 and earlier.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• White
• Advent Air

You'll need this air distribution box if you're upgrading your RV's AC to a 2025 ducted or ductless system with the new R32 refrigerant. New ACs will not work with any systems from 2024 or earlier.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• White
• Advent Air

Replaces the wheel hook on your Benton bike rack (B54VR, B82FR, B54FR, and B34FR). This is the wheel hook that attaches to the top of the adjustable arm, to secure your bike's front tire.

• Accessories and Parts
• Hitch Bike Racks
• Cradle and Arm Parts
• Upright Hooks
• Shifts&Grins
• LittleShift
• Benton

Replaces the anti-rattle hitch pin for your Benton rack (B54VR, B82FR, B54FR, B34FR, and B94FR).

• Accessories and Parts
• Hitch Bike Racks
• Pins and Clips
• Pins
• LittleShift
• Shifts&Grins
• ShiftShow
• Benton

Replaces the hardware for your Benton LittleShift bike rack (B54FR).

• Accessories and Parts
• Hitch Bike Racks
• Hardware
• LittleShift
• Benton

Confidently install your Old Man Emu leaf springs with this custom-fit bushing kit. Includes 1 metal sleeve and 6 bushings made of durable polyurethane and rubber to reduce squeaks and last longer. Each spring requires one kit, so order accordingly.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Bushings
• Old Man Emu

Front-end sag from added weight affects ride height and steering. A 10 mm coil spring packer restores balance by compensating for accessories like bumpers or winches. Easy to install, it provides a subtle lift for better handling and a level stance.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Spring Supports
• Old Man Emu

Protect your investment and add options to your light bar with these clip-on polycarbonate covers. Used on Slimline bars with spot or flood lights, the amber color adds contrast in fog or wet conditions, while limiting impact damage. Sold as a pair.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Light Covers
• 9 Inch Long
• Amber
• ARB

Confidently install your Old Man Emu leaf springs with this custom-fit replacement U-bolt kit, including 1 U-bolt, 2 washers, and 2 nuts. Most setups need 2 U-bolts per spring, so order accordingly if not reusing existing hardware.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• U-Bolts
• Old Man Emu

When you lift the front of your rig, the sway bar can end up out of position. This front sway bar link brings it back into proper alignment - helping you maintain stability and predictable handling on- and off-road.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• End Link
• Front Anti-Sway Bar
• Old Man Emu

Reduce friction and prevent squeaking with SRBC60A interleaf liners for Old Man Emu leaf springs. These HDPE liners snap into place and feature a long retention clip, ideal for bottom leaves, or long leaves with contact on one side only.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Liners
• Old Man Emu

Worn bushings cause clunking, poor handling, and alignment issues. If your suspension feels loose or noisy, replacing your bushings may bring back control, comfort, and confidence - without replacing major components.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• Bushings
• Old Man Emu

Lifting your suspension can create new clearance issues - like the front driveshaft getting too close to the sway bar or the rear sway bar limiting travel. This spacer kit solves both, giving your suspension room to work as it should.

• Accessories and Parts
• Anti-Sway Bars
• Spacers
• Rear Anti-Sway Bar
• Front Anti-Sway Bar
• Old Man Emu

Confidently install your Old Man Emu leaf springs with this custom-fit U-bolt kit, including 1 U-bolt, 2 washers, and 2 nuts. Most setups need 2 U-bolts per spring, so order accordingly if not reusing existing hardware.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• U-Bolts
• Old Man Emu

Added gear can cause rear suspension sag, throwing off ride height and handling. A 10 mm coil spring packer levels your stance by compensating for uneven weight. Easy to install, it provides a subtle but effective lift for better balance and control.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Spring Supports
• Old Man Emu

Lifting your rig can throw off sway bar angles and compromise handling. These front and rear sway bar links restore proper geometry, keeping your suspension stable and your sway bar doing its job on and off the road.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• End Link
• Rear Anti-Sway Bar
• Front Anti-Sway Bar
• Old Man Emu

Use this helper spring spacer kit when adding a helper spring to your Old Man Emu leaf spring pack. Includes a 60 mm x 3 mm spacer and HDPE liners to reduce friction, prevent hotspots, and ensure proper spacing for smooth and durable performance.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Spacers
• Helper Spring Spacer
• Old Man Emu

Y-Type splitter cable with ARB's 5-pin connectors allows up to 4 Solis lights to be controlled from one switch pad or the LINX system. If you want lights installed with (1) 5-setting switch pad, you need this splitter for safe, optimal operation.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Wiring
• Splitter
• ARB

After a lift, your steering can feel twitchy or off-center, like your rig just won't hold a straight line. This caster kit adds 2 degrees of positive caster through a set of press-in bushings, helping your front end feel planted again.

• Accessories and Parts
• Vehicle Suspension
• Casters
• Old Man Emu