New Trailer Product Arrivals

If you're fixing up your trailer after years of hauling or building a custom setup, this plain steel spring seat welds to your 3,500-lb axle and keeps your suspension steady for all your weekend runs and workday jobs.

• Trailer Suspension Parts
• Spring Seats
• Car Hauler
• Utility Trailer
• Camper
• 3500 lbs
• Square Axle - 2 Inch
• CE Smith

If your trailer's suspension is starting to sag or you've spotted rust on the old hangers, this plain steel kit makes replacing them easy. Includes all hardware to mount two leaf springs, so it's perfect for repairs or new builds.

• Trailer Suspension Parts
• Hangers
• Camper
• Car Hauler
• Utility Trailer
• Double Eye Springs
• Single Axle
• CE Smith

Keep your trailer steady on the road. This heavy-duty front hanger attaches to your trailer's frame and holds a 1-7/8" wide slipper spring in place, so your suspension can absorb bumps and keep your cargo riding smooth.

• Trailer Suspension Parts
• Hangers
• Camper
• Car Hauler
• Utility Trailer
• Slipper Springs - 1-7/8 Inch
• 3-7/8 Inch Tall
• CE Smith

If youre hauling your boat to the ramp or loading sleds for a snow day, your trailer needs reliable hardware. This galvanized U-bolt plate keeps your axle and springs secure through wet launches and winter roads.

• Trailer Suspension Parts
• U-Bolt Plates
• Boat Trailer
• Snowmobile Trailer
• Round Axle - 2 Inch
• CE Smith

Every time you head to the ramp or hit the road, you count on your trailer to keep your boat or gear riding safe. This galvanized bracket connects your slipper spring to the frame, resists rust from rain, spray, and muddy drives.

• Trailer Suspension Parts
• Hangers
• Camper
• Boat Trailer
• Snowmobile Trailer
• Car Hauler
• Utility Trailer
• Slipper Springs - 1-3/4 Inch
• 2-1/4 Inch Tall
• CE Smith

When you pull your trailer down a gravel road or pull out after a full day at the lake, this rear hanger will support every mile. It holds your 2" slipper spring, so bumps and potholes dont get the best of your cargo.

• Trailer Suspension Parts
• Hangers
• Camper
• Car Hauler
• Utility Trailer
• Slipper Springs - 2 Inch
• 1-1/4 Inch Tall
• CE Smith

Swap worn springs with this CE Smith 24-5/8" slipper leaf spring. Built to handle 250-lb loads, it's perfect for light-duty trailers. Features 1-leaf steel construction, 1-3/4" width, and eye-radius end for 1/2" shackle bolt fit.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Slipper Springs
• 1/2 Inch Eye
• Bushing Not Included
• 500 lbs
• 1-3/4 Inch Wide
• 24-5/8 Inch Long
• Standard Grade
• CE Smith

Stop worrying about rusted trailer parts after trips to the boat ramp or long days in the rain. This galvanized spring seat welds to your 2" square axle and fits 1-3/4" or 2" springs, fighting off rust for seasons to come.

• Trailer Suspension Parts
• Spring Seats
• Utility Trailer
• Camper
• Car Hauler
• 3500 lbs
• Square Axle - 2 Inch
• CE Smith

7-3/4" Long curved equalizer connects double-eye springs on tandem- or triple-axle trailers and allows for enough movement between the axles to keep the ride smooth and the load undisturbed. Galvanized, so it's perfect for your boat trailer!

• Trailer Suspension Parts
• Standard Equalizer
• Car Hauler
• Camper
• Snowmobile Trailer
• Boat Trailer
• Utility Trailer
• Double Eye Springs
• 7-3/4 Inch Long
• Triple Axle
• Tandem Axle
• CE Smith

Keep your trailer steady on the road. This front hanger attaches to your trailer's frame and holds a 1-3/8" wide slipper spring in place, so your suspension can absorb bumps and keep your cargo riding smooth.

• Trailer Suspension Parts
• Hangers
• Camper
• Snowmobile Trailer
• Boat Trailer
• Car Hauler
• Utility Trailer
• Slipper Springs - 1-3/4 Inch
• 2-3/8 Inch Tall
• CE Smith

6" Long triangular equalizer connects double-eye springs on tandem- or triple-axle trailers and allows for enough movement between the axles to keep the ride smooth and the load undisturbed. Designed primarily for RVs and mobile homes.

• Trailer Suspension Parts
• Standard Equalizer
• Boat Trailer
• Camper
• Snowmobile Trailer
• Car Hauler
• Utility Trailer
• Double Eye Springs
• 6 Inch Long
• Tandem Axle
• Triple Axle
• CE Smith

If you're updating your trailer or swapping out old parts, this plain steel spring seat makes repairs or upgrades easy on a wide range of trailer setups. It welds to a 2-3/8" round axle and fits 1-3/4" or 2" springs.

• Trailer Suspension Parts
• Spring Seats
• Camper
• Car Hauler
• Utility Trailer
• 3500 lbs
• Round Axle - 2-3/8 Inch
• CE Smith

This 4-leaf double-eye spring is 25-1/4" long x 1-3/4" wide. It is designed for use with 3,500-lb trailer axles.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Double Eye Springs
• 9/16 Inch Eye
• Nylon Bushings
• 3500 lbs
• 1-3/4 Inch Wide
• 25-1/4 Inch Long
• Standard Grade
• EMCO

USA-made slipper leaf spring acts as part of your trailer's suspension system providing an attachment point for a 4,300-lb axle. Spring flexes to resist shock while ensuring a smooth ride. Includes bushing with 9/16" inner diameter.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Slipper Springs
• 9/16 Inch Eye
• Nylon Bushings
• 4300 lbs
• 1-3/4 Inch Wide
• 26-1/4 Inch Long
• Standard Grade
• EMCO

Tired of rusty, flaking running gear on your trailer? Need more corrosion protection for launching your boat or towing over heavily treated roads? Upgrade your suspension with this long-lasting, supremely rust-resistant leaf spring.

• Trailer Leaf Springs
• Trailer Suspension Parts
• Double Eye Springs
• 9/16 Inch Eye
• Nylon Bushings
• 7000 lbs
• 1-3/4 Inch Wide
• 24-7/8 Inch Long
• Marine Grade
• etrailer

Replacement U-Bolt plate helps to secure one end of your 2-3/8" diameter trailer axle to a 2" wide leaf spring. Designed for use with 3,500-lb, heavy-duty Dexter axles. 3/16" Thick steel plate ensures strength.

• Trailer Suspension Parts
• U-Bolt Plates
• Snowmobile Trailer
• Boat Trailer
• 3500 lbs
• Round Axle - 2-3/8 Inch
• Dexter

Lower your trailer deck for easier boat launches with this corrosion-resistant, galvanized drop axle. Ideal for marine use, it helps you launch in shallow water without sinking your truck or soaking your feet.

• Trailer Suspension Parts
• Trailer Axles
• Leaf Spring Suspension
• Marine Grade
• No Hubs
• 3500 lbs
• Spindles Only
• Universal Fit
• Drop - 4 Inch
• Dexter

Lower your trailer deck for easier boat launches with this corrosion-resistant, galvanized drop axle. Ideal for marine use, it helps you launch in shallow water without sinking your truck or soaking your feet.

• Trailer Axles
• Trailer Suspension Parts
• Leaf Spring Suspension
• Marine Grade
• No Hubs
• 3500 lbs
• Spindles Only
• Universal Fit
• Drop - 4 Inch
• Dexter

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for an 8,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Double Eye Springs
• 9/16 Inch Eye
• Nylon Bushings
• 8000 lbs
• 1-3/4 Inch Wide
• 24-7/8 Inch Long
• Standard Grade
• etrailer

Tired of rusty, flaking running gear on your trailer? Need more corrosion protection for launching your boat or towing over heavily treated roads? Upgrade your suspension with this long-lasting, supremely rust-resistant slipper leaf spring.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Slipper Springs
• 9/16 Inch Eye
• Nylon Bushings
• 8000 lbs
• 2 Inch Wide
• 26-5/8 Inch Long
• Marine Grade
• etrailer

Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 10,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushing with 9/16" inner diameter.

• Trailer Leaf Springs
• Trailer Suspension Parts
• Slipper Springs
• 9/16 Inch Eye
• Rubber Bushing
• 10000 lbs
• 2-1/2 Inch Wide
• 30-1/2 Inch Long
• Standard Grade
• etrailer

USA-made leaf spring provides an attachment point for your trailer's axle. Spring flexes to resist shock while ensuring a smooth ride. Includes bushings with 9/16" inner diameter.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Double Eye Springs
• 9/16 Inch Eye
• Nylon Bushings
• 2000 lbs
• 1-3/4 Inch Wide
• 26 Inch Long
• Standard Grade
• EMCO

This 2-leaf slipper spring is 24-1/4" long x 1-3/4" wide. It is designed for use on trailers with 1,000-lb axles.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Slipper Springs
• 9/16 Inch Eye
• Nylon Bushings
• 1000 lbs
• 1-3/4 Inch Wide
• 24-1/4 Inch Long
• Standard Grade
• EMCO

Trailer leaf spring provides an attachment point for your trailer's axle. Spring flexes to resist shock while ensuring a smooth ride. Includes bushings with 9/16" inner diameter.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Double Eye Springs
• 9/16 Inch Eye
• Nylon Bushings
• 6000 lbs
• 1-3/4 Inch Wide
• 25-1/4 Inch Long
• Standard Grade
• EMCO