ClearPlus Intelli Curve Windshield Wiper Blade - Hybrid Style - 22" - Qty 1

Video Transcript for ClearPlus Windshield Wiper Blades Installation - 2013 Ford Explorer

Shane: Hi, I'm Shane with etrailer.com. Today we're going to be taking a look at, and I'm going to show you how to install the ClearPlus Intelli Curve Hybird Windshield Wiper Blades on our 2013 Ford Explorer. Adding new windshield wipers is going to ensure you have a clear windshield during those rainy, icy and snowy conditions. They are going to be covered all-weather blades. They're going to have a rubber cover on them that's going to cover all of your mechanical parts on the inside. You notice we're going to have a little wing here.

This is not only to keep your windshield wiper down on your glass while your driving, keep that lift from happening. But it's also going to reduce the amount of build up we get with snow and ice.Each blade is going to have six points of articulation. This is to evenly distribute downward pressure from one side of the blade to the other so we're using the whole thing. Our squeegee is going have a molybdenum coating and it's going to reduce or prevent that skipping and chattering we get in those light rainy conditions.Let me show you how to get them installed. We're going to start by taking our wiper blade.

You're going to have a piece that's going to come on it. We just need to snap that off. You're just going to spin it upside down and push on it. It will look just like that. Then you're going to take this piece that's going to come with your wiper blade, it's actually going to come with each wiper blade.

So we need to pop off a couple pieces on here. This top one, we're going to pull up and kind of pull back on it. Just like that. Then we're going to have another piece here. We're just going to pull out the two sides, like that.

And this back, we're going to take and we're going to slide it back just like that to where it's loose.Then take off our old blade. I suggest having a piece of cardboard underneath because our windshield wiper arm is metal and if this happens to slip out of your hand while you're taking it off and hit your glass, it could break it. So it's good idea, piece of plastic or something like that, just to give you a little protection. Now we'll take our new piece, we're going to slide it just like that. On the back we're going to push that in until it clicks. Push these together, just like that. Then we'll take our new wiper blade. You want to make sure that the fin is up towards the top. And then we'll just pop it into place. Then you're going to repeat that same process for the other one.This is going to do it for a look at and installation on the ClearPlus Intelli Curve Hybird Windshield Wiper Blades on our 2013 Ford Explorer.