1970 Jeep Hardware

Hello Mike, Sounds like you are getting things set up the right way and not going over your payload, I respect that. It looks like the weights are the same whether you have a 6 3/4' or 8' bed. If you happen to have an aftermarket hitch,…

Hey William! I don't have a way of knowing how much space there is on a 2023 Gladiator without one here to test it. What I can tell you is that the #FR95DJ measures 2-5/8" long x 50" wide x 21-11/16" tall so you can use those…

The drawer dimensions of the MORryde Trail Kitchen for Jeep Wrangler Or Wrangler Unlimited #MR83MR are 15-3//4 inch wide by 25-1/2 inch long by 6.6 inches tall.

The top tray on the MORryde Camping Kitchen with Storage Compartment for Jeep Wrangler #MR83MR measures 0.947" so you're looking at just under an inch tall, which I confirmed with my contact at MORryde. Hope this helps you out!

Hey Emilie, We can get your 2024 GMC Sierra 3500 set up with an extension, but to do so what you'll have to do is remove the factory hitch and install the TorkLift SuperHitch Magnum Trailer Hitch Receiver #TL74FR. Reason for that is there…

The height of just the mounting bracket of the MORryde part #MR73QR is 6.6 inches and the length is 30 inches. It weighs 84 lbs.

The first step would be to determine the exact bolt pattern of the wheel. If you click the provided link, you'll be taken to an FAQ article that shows exactly how to do this. Once you determine the bolt pattern, you can compare that information…

The CE Smith #CE27310G spare tire carrier you'd mentioned would work well for your trailer frame. The carrier is compatible with trailer frames up to 4 inches tall and from 1 to 3-1/2 inches wide. The carrier is compatible with wheels with 4 on…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

I checked with Progressive Dynamics and the approved breakers for use with the Progressive Dynamics 4000 Series #PD4045KA are: Thomas & Betts – TB & TBBD series Square D – HOM & HOMT series Cutler Hammer/Bryant – BR & BRD series GE –…

You are correct that you'll need to attach the AC Converter Hot (Black Wire) to a 15 amp breaker when installing the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger #PD4045KA. You will not be limited to 15 amps on the DC…

Hey Joe, thanks for getting in touch. What I recommend for your 2025 Subaru Outback Wilderness is the Rhino-Rack Vortex Roof Rack #RR59XE. This will attach to the factory rails on your Subaru. The Aero crossbars have top channels to which you can…