1942 Jeep Vehicle Cargo Control

Hi Kev; the MORryde RV Cargo Sliding Tray with the 80% extension is only available at 72" long x 48 " wide #MR52FR. If you're alright with a 60% extension we have the MORryde RV Cargo Sliding Tray - 60" x 48" #MR85FR.

Hey Paul, I spoke with Curt and they stated that the Replacement Trunnion Spring Bar for Curt TruTrack Weight Distribution System #C17535 would only be compatible with the #C17499. The Curt TruTrack 4P Trailer Mounted Weight Distribution System w/…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Tim, the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F2709 will indeed fit your 2024 GMC 2500 AT4X with a factory suspension lift. You will likely need to use a spacer kit to compensate for the lift, depending on the amount of…

Hey Jordan, thanks for getting in touch and for providing the link to the specs. I really appreciate that. The main spec I am looking at here is the hitch weight which is 754 lbs. Every weight distribution (WD) hitch has a specific tongue weight…

I sure do and yes they are! The holes are spaced 1-1/4" apart on center for both the BulletProof Hitches Weight Distribution Shank item #BPH85RR and the Blue Ox SwayPro Weight Distribution System item #BXW2000 so they are indeed compatible.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Dave, we have a version that does fit your tire size with the part #TC3231CAM but the specific size you mentioned would not work.

Hi Bryan, Yakima BaseLine towers unfortunately don't have a compatible landing pad to connect to the channel of a RetraxPro tonneau cover. You'll need to Skyline Towers #Y53TR and Landing Pad 1 #Y00221 in order to attach your Yakima…

Hey DC, when you have the etrailer tonneau cover part #e23DR installed on your 2024 GMC Sierra 1500 short bed and have the cover folded all the way up you'd have right at 50 inches of open space.

I spoke with my contact at Lippert and she said that you cannot cut the fabric for the Solera Awnings. This is because the polycords inside the fabric will indeed come apart if you were to make a cut. When choosing the correct replacement fabric size…

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…