BOLT Locks Specs:
Features:
This 5/8" diameter receiver lock codes to your vehicle's ignition key. Made of automotive-grade materials and nearly impossible to pick or bump, this corrosion-resistant lock helps keep your ball mount safe and secure.
More Information >BOLT Locks Specs:
Features:
This 1/2" diameter receiver lock codes to your vehicle's ignition key. Made of automotive grade materials and nearly impossible to pick or bump, this corrosion-resistant lock helps keep your ball mount safe and secure.
More Information >BOLT Locks Specs:
Features:
This heavy-duty padlock codes to your vehicle's ignition key. Made of automotive-grade materials and nearly impossible to pick or bump, this corrosion-resistant lock helps keep your trailer and equipment safe and secure.
More Information >Videos
for BOLT Locks
Help Articles
for BOLT Locks
Expert Answers
for BOLT Locks
I've never heard of an actual third brake light connector on a camper shell to plug in on a truck…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we…
view full answer...The best modern day size replacement option we have for a 6.00-16 is a 235/80-16 which measures…
view full answer...The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.
view full answer...What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…
view full answer...A tow package for a vehicle is usually a frame mounted trailer hitch and trailer wiring on a vehicle like your 2002 Dodge Dakota. If you have those two things you could pretty easily assume you have the tow package. Or, you can take the VIN of your…
view full answer...Yes, you can replace your GE air conditoner with an Advent air conditioner like the Advent Air RV Air Conditioner #ACM150. Additionally, you will also need a thermostat. For that, you can use the Air Distribution Box w/ Built-In Thermostat for…
view full answer...The Solera Gas Strut part #LC280343 is designed for Lippert-Solera branded awnings. That said, it should be able to be used with others but…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...Generally speaking, the lube plate will need to cover the skid plate on the 5th wheel hitch. There are some pin boxes out there that will recommend a specific lube plate but most of the times this classification will be from the 5th wheel hitch…
view full answer...The Demco Hijacker Autoslide 21K #DM8550038 weighs approximately 305-lbs. The head of this hitch weighs around 70-lbs and can be removed to help make moving and installing this 5th wheel hitch a little bit easier.
view full answer...