The Progressive Dynamics 1000 Watt Inverter # PD94FR(PD1610) will require a power center with a converter like the Progressive Dynamics 4100 Series RV Converter # PD4135K. This particular unit is compatible with lithium batteries and includes a 35 amp converter. We have similar options with higher converter outputs depending on the demands of your trailer.
45 Amp # PD4045KA
60 Amp # PD4560K18LS8
75 Amp # PD4575K18LS8
90 Amp # PD4590K18LS8 view full answer...
The recommended 55A replacement for your Parallax 7300 would be the Progressive Dynamics # PD4655V for flooded lead acid, AGM and Gel batteries.
Progressive Dynamics offers a 1000 watt pure sine-wave inverter/transfer switch, part # PD1210SR that would be a good choice if a 2000 watt surge/1000 watt running output would meet your needs.
I've linked to product description videos for the items mentioned above. view full answer...
The Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger # PD4560K18LS8 would be the correct replacement and is designed for 50 amp service, so this replacement would work for your Jayco 336 FKDS. view full answer...
The correct replacement transfer switch for your PD52 transfer switch in your 2019 Jayco North Point, is the:
- Progressive Dynamics Transfer Switch - Metal Case # PD52.
This transfer switch can automatically reroute your RV's AC input from shore power to generator power, and can also be use with an inverter in place of a generator.
Attached is a review video for you to check out as well. view full answer...
The solar panel and subsequent charge controller aren't connected to the inverter directly nor is one required. However, if you already have one there would be no compatibility issues with the solar panel or charge controller. I have attached for you below a photo to better visualize this as well as a help article which walks you though the install more in-depth.
In order to see how much solar you need, you'll need to run some numbers. In addition to the install help article I have attached... view full answer...
We offer multiple sizes over 36" for your mer401-60 hose.
MB Sturgis Sturgi-Stay Propane Fill Hose - POL Pigtail x 1/4" Male Inverted Flare # 100019-48 for 4' hose.
MB Sturgis Sturgi-Stay Propane Fill Hose - POL Pigtail x 1/4" Male Inverted Flare # 100019-60 for 5' hose.
MB Sturgis Sturgi-Stay Propane Fill Hose - POL Pigtail x 1/4" Male Inverted Flare # 100019-144 for 12' hose. view full answer...
You would need to use whatever the manufacturer lists as an acceptable spark plug replacement. For the A-iPower 2,000-Watt Portable Inverter Generator # 289-SUA2000i you would need an NGK BP4H or a Champion L95YC, which you should be able to find at your local hardware store. view full answer...
There unfortunately isn't a switch you can install that will make your current converter compatible with Lithium batteries, but we do offer a replacement converter that is Lithium compatible.
You'll want to use # PD4575LICSV to replace your current converter. The # PD4575LICSV is only compatible with Lithium batteries, so you might want to hang on to your old one should you ever need to switch back to lead acid batteries for any reason.
I've linked to a product video featuring the converter. view full answer...
The A-iPower 2,000-Watt Portable Inverter Generator # 289-SUA2000i you were looking at has an OEM spark plug that is labeled as "Torch E5T".
According to the owner's manual to replace it you need either a NGK BP4H or a Champion L95YC that you'll need to acquire elsewhere.
If you have a different generator then you'll need to refer to the owner's manual for the correct spark plug replacement type. view full answer...
We have the exact part you are looking for. It is the MB Sturgis Sturgi-Stay Propane Fill Hose - POL Pigtail x 1/4" Male Inverted Flare - 4' # 100019-48. This will have the matching fittings, hose size, and the length you requested. view full answer...
The Compact Low Pressure 2-Stage Automatic Changeover RV LP Gas Regulator # 37207-31525 doesn't have a specific length requirement for the pigtail connections. You can absolutely use the MB Sturgis Propane Pigtail - Stainless Overbraid - Type 1 x 1/4" Male Inverted Flare - 2' # 100833-24 but they are 3 times longer than your current pigtails. If you just want slightly longer hoses you can use the Propane Hose with Back Check - Type 1 x 1/4" Male Inverted Flare - 1-1/2' # 37207-30735 or... view full answer...
I believe what you're referring to is the converter section, as that's what is at the bottom of the power center, like what we see with part # PD4560K18LS8.
To replace the converter section you just need part # PD4060CSV which is rated for 60 Amps.
If you have something else and it isn't working properly then I recommend replacing the entire system with the converter/distribution panel part # PD4560K18LS8 I had mentioned above. view full answer...
To replace your Parallax 7355 converter you need the Replacement Converter # PD4655V.
If you're needing to replace the entire control center unit then you need the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger # PD4060K instead. view full answer...
These are very similar products, the RV LP Gas Regulator, # 37207-30395 is a dual stage regulator with auto changeover and rated at 345,000 Btu. The # 37207-31525 is rated for 262,000 Btu. Each option has a 1/4" FIF inlet x 3/8" FPT outlet. The specs for the Winntec 6020 Propane Regulator show it to be a rated at max capacity of 210,000 Btu. You can go at a higher rated Btu regulator when replacing. The Camco Automatic Changeover 2-Stage Propane Regulator, # CAM59005 is actually rated... view full answer...
The A-iPower 2,000-Watt Portable Inverter Generator - 1,600 Running Watts - Gas - Manual Start # 289-SUA2000i will use the spark plug "Torch E5t (E5RTC) with plug gap 0.6-0.7mm (0.024-0.028 in)".
The Torch E5RTC replacement spark plugs can be:
Autolite 275
Brisk NR17YC
Champion 929
Champion RL95YC
Daihatsu 999-06910-P9-004
Denso IWF16
Denso W16FPR-U
NGK BPR5HS
The BPR6HS in not directly compatible, but the BPR5HS is. view full answer...
Based on your serial number beginning with 3, this A/C unit would have been made in 2003 or 2013. I spoke with Dometic (who now owns the Dou-Therm brand) about your unit and found that the fan blade is no longer available. For the motor they only have the 3310725.001 service kit consisting of some bushings and mounting groments. The inside cover is not avaiable either.
It seems that your best alternative is a new unit such as the Advent # ACM135C roof top air conditioner with 13,500 BTU... view full answer...
For a replacement converter for your 2000 Jayco Eagle C-Class RV with a Power Source PC45a, I recommend the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger # PD9245C. The Inteli-Power Rv Converter is compatible with 12v systems and has dimensions of 8-1/4" long x 7-1/4" wide x 4-11/16" deep. view full answer...
The Furrion Ductless RV Range Hood with Light # FHO23SACRVBL was designed to run off of 12 volt power and would not work in an outlet like you mentioned as that's 110 volt AC power. You'd need to source a 12 volt power supply. All of the RV range vents we offer that are ductless use 12 volt power. z view full answer...
I hope that I am understanding what you are needing correctly. We do have the Replacement Power Cord with Power Supply Box for Thomas Payne Seismic RV Power Reclining Sofas # 195-000111 which is the 2-pin power cord that powers the Thomas Payne Seismic RV power reclining sofa or recliner.
If this is not the right cord or I have misunderstood what you are needing, please let me know and I would be happy to help you further. view full answer...
Go To Results