Hello Gary, thanks for reaching out. I double checked with Roadmaster, and unfortunately they do not make a front or rear sway bar for the 2012 Freightliner M2 Class C. They do make a steering stabilizer though, and this is a great add-on that will help improve ride quality and eliminate sway. Since no sway bars are available, this will definitely be the best option for an upgrade.
Now, to make sure you get the right steering stabilizer, you will need to measure the front axle U-bolts.... view full answer...
Hey Marty, for your 5,200 lb Dexter Axle you can use the etrailer Electric Trailer Brakes # AKEBRK-7-SA. These brakes will work with 5.2 to 7,000 lb axles, measures 12" x 2", and will work with 14 1/2", 15", 16", and 16 1/2" wheels.
Also, the hardware you need is # BRKH12, and the wiring you need is the 10 Gauge Primary Wire # 10-1-1. view full answer...
Yes, it will! The Advent Air Replacement RV Air Conditioner item # ACDOM135 is exactly what you need to replace your current Dometic unit. It is designed to replace old Dometic air conditioners and connects to your Dometic setup. This will allow you to continue using your current Dometic air distribution box. view full answer...
Hey Corey, thanks for reaching out!
The Lippert Slam Latch for RV Doors #LC54PJ fits a 3-3/4” x 3-3/4” cutout - it's more of a universal fitment so you'll need to check and see if these dimensions will work with where you're wanting to install it. view full answer...
Hello Juan, thanks for reaching out. There are a number of factors involved when converting a semi 7-way to an RV 7-way. Semis generally use a 7-pin round pin socket, similar to # PK11720. And RV style 7-way uses blades, like # PK12706. We do not offer any pre-made adapters to make this conversion that will carry all of the electrical functions required by the RV.
Another thing to be aware of is fifth wheel trailers use a combined wiring system where the brake lights and turn signals are... view full answer...
Hey Robert, since your 2021 Freightliner M2 doesn't have a factory sway bar the correct kit you'd need is the part # RM39MR. The part number you mentioned would only work if you had the factory sway bar. view full answer...
Hey Tevine, thanks for reaching out!
Yes, the SuperSprings Custom Suspension Stabilizer and Sway Control Kit # SSA35 does come with the 2 leaf springs so you get help on your rear suspension as a whole.
Are you looking to gain more control of your RV? view full answer...
Hello David, thanks for reaching out. We do sell flat tow breakaway cables so we should have what you need. If you are wanting to do just the cable and plunger they are mostly brand specific. There is no way to add pictures on here (yet) but you can email those to me at [email protected] and I am happy to take a look.
In most cases, when replacing a breakaway it is best to just replace the cable, plunger and switch. They all should use two wires, they are easy to replace and they... view full answer...
Hi John, the information identifying the air bags is probably on the end plate so I'm afraid you will have to pull one to get it. We don't have anything specifically listed for the Journey so without more information there isn't much I can do to help find a replacement. If you can get to the label with a part number and send me a picture I'll see if a replacement is available. view full answer...
Hey Gabe. Since you do not have the factory harness to add a 4-way or 7-way connector to your 2004 Freightliner Sprinter you will need the Curt Powered Tail Light Converter item # C59236. This connector is going to wire into your tail light harness and then you'll need to run a power line directly to your battery. This will give you a 4-way connector that controls your trailer's lighting functions.
If you're wanting to add a 7-way connector you will also need the Universal Installation... view full answer...
Hello Mark, thanks for reaching out. We will undoubtedly have the Snap Pads you need, but there is no way to look up your RV to know exactly what size/shape jack feet you have. RV manufacturers just are not that specific with their online literature.
Any chance you could measure the front and rear jack feet? Also note the shape, and keep in mind on some models the front and rear feet are different sizes.
The SnapPad XTRA Jack Pads for Lippert Leveling Systems # SP54FR4 comes with four... view full answer...
Hey Todd! Since there are no custom front hitches for your 2023 Jayco Seneca 37M you will need a universal option. What you can use is the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07. This has a weld-on installation so you will need to take it to a certified welder. I would take a look at the front of your motorhome first to see if it looks like it will work for you. A better choice may be to take the # E-9 to a local fabricator and have them fashion a custom front... view full answer...
Hey Clay! It does not look like there is a custom Turnoverball kit for your 2006 Freightliner Century like the one you're looking at, but you can still install one with the B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks # BWGNRK1500.
This hitch has a nice 30,000 lb capacity and includes the 2 5/16" hitch ball, but it would need to be welded on.
If there is anything else I can help you with, feel free to leave a comment and I'd love to help! view full answer...
No, Richard it is not. The item # LC66FR is our part number for the Lippert RV Level-Hydraulic Pump Assembly 359167. That is not going to be the correct replacement for your hydraulic pump. Additionally, we do not have the one you need. view full answer...
Hey Ray, thanks for reaching out!
The Tuson DirecLink Base Model Trailer Brake Controller # 335DL-100 can definitely be used with your 2005 Freightliner Century Class either by splicing in the wiring or using one of the following adapters if they match your truck:
- 6-Pin # 335HDCON-6PIN
- 9-Pin # 335HDCON-9PIN
- 9-Pin with Green Connector # 335HDCON-9PIN-G500
- 16-Pin # 335HDCON-16PIN
You'll also need to install the Universal Wiring Kit # ETBC7 if you don't already have a functioning... view full answer...
The only brake controller compatible with the air brakes on your 2017 Freightliner Cascida is the Hayes Air Actuated Trailer Brake Controller # HA100400C. There is no plug and play wiring harness so you will have to hardwire it in for installation. This works with trailers that have up to 4 axles. view full answer...
According to my research you have a 10 on 11-1/4" or 285mm bolt pattern on your 2018 Freightliner M2 which means the correct hub cover for you is the Phoenix USA Hub Cover part # PXQH1200F. However, in order to be certain you will want to measure from the center of one bolt hole to the center of its opposite to determine the diameter of the lug pattern. I have attached a list of other options for you as well if you do not in fact have a 10 on 11-1/4" or 285mm bolt pattern. view full answer...
Yes, there is a way to have a plug and play installation if your 2018 Freightliner XC has the factory towing package. There will be a plug to the left of the brake pedal, behind the plastics shroud that encloses the left portion of the lower steering column. I have attached a picture below for reference.
If this plug is there you will be able to use the Plug-In Wiring Adapter item # 3027-P and the Redarc Tow-Pro Wiring Adapter item # 331-TPH-017. These two adapters will allow you to connect... view full answer...
Hey James, Roadmaster does have a rear sway bar that fits your 2020 Freighliner M2 Super C with air suspension with the part # RM84ZR. In the attached install instructions link you can see the air suspension on the vehicle as the bar is installed. view full answer...
Go To Results