There's not much of a difference in the 2" hitches available for the 2023 Toyota RAV4. The Draw-Tite item # DT82QR, Curt item # C13416, and etrailer item # e23ZR all look identical when installed.
With this in mind, I recommend going with the most cost effective option which is the etrailer Hitch item # e23ZR. This hitch is custom fit and bolts to your RAV4 with included hardware. I choose the etrailer hitch over the others not only because it was the best price but also because of its... view full answer...
The number 20327-02 on your light is a discontinued Optronics light base number but it should measure 4" long by 2" wide. If this is the case then you should be able to use the amber lens # A32AB which we have had customers report to say that it has worked. view full answer...
We do not have any options for carrying bikes on your 2004 Mitsubishi Eclipse convertible. Trunk racks do not work with it and there is not currently a hitch available for it.
If you need to just be able to flat tow the Eclipse and use your existing bike rack at the same time then you can use a dual hitch receiver such as # RM-077-4 with a 4 inch rise/drop or # RM-077-2 with a 2-1/4 inch rise/drop. These were specifically designed for this purpose. view full answer...
I did some checking and it looks like your 2003 Mitsubishi Eclipse V6 with a 5 speed can be flat towed as-is. At this time though we only have base plate kits that fit the Spyder/convertible versions of your vehicle. For that you'd want the Blue Ox kit part # BX1964 that you referenced.
You'll need a tow bar which the part # BX7420 would be what I recommend as it's very easy to use and also comes with safety cables.
For lighting you can use the diode kit, # RM-15267, and not have to... view full answer...
Since we do not offer flat towing base plates for your 2007 Mitsubishi Eclipse your towing options are then to use a car hauler type trailer that keeps the entire vehicle off the ground, or potentially to use a towing dolly that supports the car's front wheels while the rear wheels remain on the ground.
Your owner's manual should be consulted to see what Mitsubishi says about towing your Eclipse. If your car can be dolly towed with an item like the Roadmaster # RM-2050-1 your manual will... view full answer...
If your 2012 Mitsubishi Eclipse is a coupe, then the Malone Runway Trunk Bike Rack for 2 Bikes - Adjustable Arms # MAL84RR is a confirmed fit to carry up to 2 bikes on your trunk. Check out the video that I attached for you to see how this works. view full answer...
We have a white replacement lid for the Fan-Tastic roof vent part # FV802250 that you referenced with part # FVK1020-81 but Fan-Tastic does not offer the # FV802250 with the white lid. Swapping the lids is really easy too. view full answer...
We do not have any hitches to fit your 2006 Mitsubishi Eclipse. If you were wanting a hitch to carry bikes, you could instead use a trunk mounted bike rack. We have the Hollywood Racks Express 3 Bike Carrier - Fixed Arms - Trunk Mount # HRE3 which you can use to carry 1-3 bikes. Please take into account that this rack will not work with spoilers. Check out the attached video to see it in action. view full answer...
The MagnaFlow Stainless Steel Catalytic Converter that will work on the 2003 Mitsubishi Eclipse with 3.0 Liter V6 is the MagnaFlow Stainless Steel Catalytic Converter - Universal - California Approved, item # MF41005. This is the rear catalytic converter only.
The 2003 Mitsubishi Eclipse with 3.0 Liter V6 also has a front pre-converter and a rear pre-converter. The replacements for those parts are the MagnaFlow Stainless Steel Direct-Fit Catalytic Converter, front pre-converter, item #... view full answer...
Before you can add a snowboard rack on your roof you need a roof rack.
I recommend the Rhino-Rack Vortex Aero roof rack on your 2006 Mitsubishi Eclipse. It's an aero bar design which has a cleaner look and reduces wind noise. You need parts:
49 inch Vortex Aero Crossbars # RRVA126B-2
Legs # RRRLKVA
Fit Kit # DK082
Once you have the roof rack I recommend the Thule SnowPack # TH7324 for a snowboard carrier. It fits the aero bars, carries up to 2 boards, and includes locks. view full answer...
The fit of a tow bar will depend on the base plates available for the car. The 2003 and 2005 model years of the Mitsubishi Eclipse are both part of the vehicle's third generation and while we do have a base plate fit for the 2003 Eclipse Spyder, Blue Ox # BX1964, we do not have any for the 2005 model year. I checked with Blue Ox and Roadmaster directly and neither offers a base plate for the 2005 Eclipse.
You will want to check your Mitsubishi owner's manual (I could not access one online... view full answer...
There is not a hitch available for your 2007 Mitsubishi Eclipse. If you already have a hitch, there should be enough room to install a platform style bike rack.
There were only Class I trailer hitches available for your Eclipse, so you will need a bike rack that is compatible with a Class I hitch and you will be limited to carrying 2 bikes at most. The hitch that was available at one time, had a tongue weight capacity of 200 pounds. The combined weight of the bike rack and bikes cannot... view full answer...
A Class I hitch cannot handle the load of more than 2 bikes. Unfortunately, no higher-capacity hitches are made for your car since the frame itself cannot support more load than that of a Class I hitch.
The Class I bike carrying limitation has to do with weight load, of course, but even more so with leverage. A larger 3-bike rack would have the last loaded bike fairly far from the end of the hitch tube and this weight + leverage would mean the potential for damage to the hitch receiver... view full answer...
The Hollywood Racks Express 3 Bike Carrier - Fixed Arms - Trunk Mount # HRE3 will not fit for your 2007 Mitsubishi Eclipse SE model because of the spoiler on it. My research shows that the SE models have spoilers. The Hollywood Racks Express 3 part # HRE3 would only work on Eclipses that do not have spoilers.
We do not have a hitch available either, so a hitch-mounted bike rack is not an option.
Our only solution to carry a bike, is the Vacuum Cup Mounted bike rack, the SeaSucker... view full answer...
In order to use your Roadmaster Falcon All-Terrain Tow Bar, # RM-522, with Blue Ox Base Plates, you will need to use an adapter. The correct adapter is Roadmaster Tow Bar to Blue Ox Brackets Adapter, # RM-031. The correct base plates for a 2000 Mitsubishi Eclipse are # BX1941.
If your 2000 Mitsubishi Eclipse has an F4A51 or F4A42 automatic transmission, you will need to use a transmission lube pump to flat tow it.
If it has a 5 speed manual transmission, it can be flat-towed. If it has... view full answer...
There are two main things that need to be considered when choosing a universal muffler, fit and sound/performance. You will need to choose a muffler with the correct inlet diameter, and sized so that it will fit in the space provided under the vehicle. Mufflers that are more free flowing increase horsepower, torque and fuel efficiency, thus improving engine performance. However, the less restrictive the muffler is, the noisier it is.
The MagnaFlow Stainless Steel, Straight-Through Universal... view full answer...
The straps of the Hollywood Racks Express 3 Bike Carrier # HRE3 that you referenced are pretty long and have been confirmed by Hollywood Racks to be long enough to make it from the rack to the top of the rear hatch on your 2007 Mitsubishi Eclipse as long as its a coupe. view full answer...
It is still possible to put a roof rack together for your 2012 Mitsubishi Eclipse. The reason you didn't see anything is because manufacturers have discontinued the fit kits that would allow you to install the rack. What you can use is the Rhino-Rack Vortex Aero roof rack system. You will need the following:
-Rhino-Rack Vortex Aero Crossbars # RRVA126B-2
-Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA
You will also need the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series... view full answer...
The lug nut adapters for the Thule K-Summit tire chains such as TH02230K34 are basically like sockets. So if you can get a regular socket over your lug nuts then the Thule lug nut adapters will also fit. view full answer...
With a Class I trailer hitch on your 2006 Mitsubishi Eclipse, you should only use the ball mount that is recommended for use with the trailer hitch. Another problem is that the ball mount that you have referenced is a Class II accessory. Class II items are designed so that they will not fit in a Class I trailer hitch.
You could use Sportframe Drawbar, # 3592, which will give you a 2-1/8 inch rise or # C45016, which will give you a 2-5/8 inch rise. view full answer...
Go To Results