The Replacement Step Pad for Aries 3" Wide Oval Nerf Bars # AA86FR measures 6.496” apart center-to-center for the inner pins, and the two outer pins measuring 17.795” apart center-to-center.
It's not uncommon for replacement pads to fit from one brand of nerf bars to the next, but we unfortunately don't have a list to show if there are any cross-reference fitments. view full answer...
I did some checking and for Sealed, Mini LED Side Marker, Clearance or Identification Light # MCL13A2B the mounting holes are spaced 2 inches apart on center. I have linked a video featuring this light for you. view full answer...
The standard air tubing diameter for Air Lift and Firestone air bag kits is 1/4 inch like the part # F2012 that you referenced. Firestone and Air Lift do not make a smaller diameter tubing at this time. view full answer...
I had our warehouse measure the #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter # TRU74FR you were looking at and from the front of the brake mounting flange to the tip of the spindle measures 5-3/8", and from the back of the brake mounting flange to the end of the spindle measures 3-3/8".
I included a diagram showing these measurements and a video of the # TRU74FR for you to take a look at. view full answer...
I wasn't sure exactly what dimension of the Convert-A-Ball Cushioned Ball Mount/Clevis/Pintle # AMCC2 you were looking for so I went out into our warehouse and measured it in several places and attached a picture of it to show these measurements. view full answer...
The square links on the pewag All Square Mud Service Snow Tire Chains - 1 Pair # PWE2441S are 8.2mm thick (.31 inches), so they will sit about 1 inch tall when mounted on the tires. There isn't a precise measurement on this since it depends on the tires, but you can generally expect about that much added height. view full answer...
Go To Results