CargoGlide 2200HD Sliding Tray for Trucks - Heavy Duty - 2,200 lbs - Steel Frame - 8" Rail

2010 Nissan Frontier - CargoGlide 2200HD Sliding Tray for Trucks - Heavy Duty - 2,200 lbs - Steel Frame - 8" Rail

Slide-out truck bed tray lets you get gear without climbing or crawling. Steel-framed, laminated plywood deck extends smoothly on sealed bearings - up to 75 percent of its length. Aluminum sides have built-in tie-down tracks. 2,200 Lbs capacity.

Features:

• Heavy-duty sliding tray extends up to 75 percent of its length from your truck bed for convenient access to cargo
  • Extends 70 percent from most long bed trucks
• Built-in safety stops lock tray in place at 12" increments along glides
  • Prevent accidental extension of tray
  • Allow manual bypass with release latch
• 8 Bearings provide strong cargo support and smooth tray glide, even when you're parked on uneven surfaces
• Integrated tie-down tracks on side and cab-end tray walls help you secure cargo
  • Include 4 marine-grade eyebolts
• Laminated, 3/4", marine-grade plywood deck supports cargo and prevents skid
  • Textured polypropylene surface resists tears, chemicals, moisture, and flame spread
• 4" Tall extruded aluminum side and cab-end walls help contain cargo
  • Increase to 8" tall near the cab end of the tray
• Adjustable feet let you fine-tune the tray height for tailgate clearance
• Handle cutouts with deck-over-latch release lever enable easy extension of tray
  • Increases tray surface area while providing safe position for fingers and hands
• Black powder-coated steel tray frame is durable and rust resistant
• Pre-assembled tray bolts securely to your vehicle's bed with included PlusNut hardware
  • Requires drilling
• Made in the USA

Specs:

• Tray weight capacity: 2,200 lbs
• Number of bearings: 8 - with a combined load rating of 28,544 lbs
  • 4 Load bearings - 4,840 lbs each
  • 2 Carrier bearings - 3,019 lbs each
  • 2 Side-thrust bearings - 1,573 lbs each
• Tie-down track weight capacity: 400 lbs per anchor point
• Warranty:
  • 4 Years on frame
  • 2 Years on bearings
  • 1 Year on deck surface and substrate

Please note: Because of the size of this item, it ships via truck freight.

The CargoGlide heavy-duty slide-out truck tray lets load and unload items in your truck bed without climbing, crawling, or excessive reaching. Instead, this custom-fit bed slide brings the cargo to you - whether you're hauling toolboxes, yard bags, paint cans, or even large appliances and construction materials. And it boasts a 2,200 lbs capacity - over 1 ton. Simply move the release lever and give the tray a pull to extend it out up to 75 percent of its length from the bed of your truck. The tray includes built-in tie-down tracks with eyebolts to help you strap down your cargo. The CargoGlide is perfect for do-it-yourselfers, contractors, hunters, and designated grocery-getters. It's made from top-grade materials, and it installs to your truck bed in just a few steps.

Custom-Fit Sliding Truck Bed Tray

The CargoGlide is custom-fit for your vehicle to make the best use of the available space in your truck bed.

The sliding tray works like a supersized, high-quality toolbox drawer. Pull the tray out to bring your gear to you without reaching or climbing up into the bed of your truck. The tray's 8 tough, high-quality bearings are designed to glide smoothly even when the tray is loaded to capacity, so it's a cinch to move heavy loads into and out of your truck bed.

The CargoGlide uses a combination of full complement, permanently-sealed bearings and sealed side-thrust bearings to ensure smooth, dependable operation without binding, whether you're parked on a level surface or an uneven one, such as a hill or ditch.

Adjustable Positioning

The CargoGlide has a locking point every 12 inches. These built-in stops let you extend the tray in increments and they serve as safety stops. When fully extended, the tray pulls out to 70 percent of its length in a long-bed truck and 75 percent of its length in a short-bed.

To slide the tray out, reach under the front face plate where the 2 cutouts are located. Squeeze the latch on the left side to release the tray, grab the handle on the right, and pull. You can bypass the stops by maintaining pressure on the latch. To close the CargoGlide, simply push the tray back in until it locks into place.

Sturdy, Slip-Resistant Tray with Tie-Down Track System

The CargoGlide's tray is a stout, 3/4" thick sheet of moisture-resistant, marine-grade plywood, laminated with TPO - a tough, polypropylene-based material that resists water, chemicals, abrasions, and flame spread. The tray held in place by a sturdy steel frame finished with chip-resistant black powder coat.

The tray is surrounded on three sides by extruded, 6061-T6 aluminum walls, 4" tall, designed keep your cargo from sliding off the tray and from bumping into the sides of your truck.

To help contain larger cargo, the walls have extensions built-in that add 4" of height for the first 4' of the tray, beginning at the cab end.

The tray will remain rock steady as you load or unload tools and equipment - the sturdy construction means it won't bend, warp or twist under a load. The CargoGlide tray can also be tilted up and removed from its track if you need to make room for tall loads.

The CargoGlide also has a built-in tie-down system that helps control your cargo. A track runs along the side and rear walls of the tray to give you lots of options for securing your load. The tray comes with 4, marine-grade steel O-rings that can be positioned anywhere along the track to create tie-down points for your cargo. Each tie-down track anchor point has a 400-lbs capacity.

Hassle-free Installation

The CargoGlide can be installed in a few simple steps. It's designed to be attached at 4-6 points in your truck bed using PlusNuts and bolts - all part of the included hardware packet. You will need the following tools: tape measure, crescent wrench, drill, knife, 5/16" bit, 1/2" bit, 1/2" socket, and a ratchet or impact driver.

The steps are straightforward (consult manual for full instructions):

1. Position the CargoGlide in your truck bed and determine clearances (you will need another person to help lift)
2. Locate and mark attachment points. Make sure there are no gas lines or other obstructions under the truck or van bed where you plan to drill.
3. Drill the pilot holes installation holes.
4. Install PlusNuts, bolts, and washers. Then tighten bolts.

Easy Loading/Unloading for Bicycles

The CargoGlide can be equipped to offer convenient bicycle transport. Install fork- or frame-mount truck bed bike racks (sold separately), and then slide the tray out for bike loading/unloading. No more awkward lifting or painful jabs from pedals and handlebars as you hoist bikes into and out of your truck bed.

Adjustable Height

The 2 adjustable feet on the underside of the tray allow you to fine-tune the height of the CargoGlide tray when you install it. This allows you to customize the tray to the perfect height for clearing your tailgate. Turn the feet clockwise to shorten the height of the tray or rotate the feet counterclockwise to extend it up.

CG2200HD-7038 Cargo Glide Heavy Duty Sliding Truck Bed Tray - Steel Frame - Aluminum Sides - 2200 Pounds