A cracked shower pan can let water leak into the floor and behind the walls. This 32" x 24" shower kit pairs a center-drain pan and a shower surround so it fits the opening and gives you a solid shower area that stays ready for daily use.
Replacement jobs get expensive fast when the base does not match the space or the drain lands in the wrong spot. This kit starts with a 32" long x 24" wide shower pan with a center drain setup, a 2" drain hole, and the drain center 12" from the front edge, then pairs it with a surround formed to 32" wide x 23-3/4" deep x 66" tall for standard 32" x 24" alcove openings. Once those measurements line up with your existing layout, you can set the pan, position the surround, and keep the replacement moving instead of turning it into a bigger tear-out.
Cracks usually start at the floor when the base is not carried evenly underneath. This pan uses a pre-installed foam base that supports the bottom and keeps it seated securely and evenly during installation, which speaks directly to the weak spot that sends many replacement projects back to square one. With the pan set on a prepared surface, the floor stays supported underfoot and the shower keeps feeling solid when you step in, turn around, and rinse off.
Water getting past the edges is where a simple bath update starts threatening the surrounding interior. This setup combines a 3-sided flange on the pan with full wall coverage from the surround, which installs over the wall surface and can be mounted using pressure sensitive tape (sold separately), ABS-compatible spray adhesive (not included), or rivets (sold separately). Once the edges are sealed during installation, water stays inside the shower footprint and the wall area around it stays protected for the next trip and the one after that.
A replacement can still feel unfinished if the new shower does not work well once the leak or crack is gone. This kit pairs a textured anti-slip pan surface with 3 molded shelves in the surround, and the surround can also be drilled or adjusted on-site to work around fixture and layout constraints. After installation, you end up with a shower area that gives you firmer footing, keeps soap and bottles off the floor, and looks like a complete refresh instead of a patched repair.
Alternate Instructions
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.