A cracked shower pan can let water leak into the floor and behind the walls. This 40" x 24" shower kit pairs a right-hand drain pan and a shower surround so it fits the opening and gives you a solid shower area that is ready for daily use.
Replacement projects get expensive fast when the base does not fit the opening or the drain lands in the wrong spot. This shower pan is sized at 40" long x 24" wide with a right hand drain setup, a 2" drain hole, and the drain center 4-7/8" from the closest edge, while the surround is formed to 40" wide x 23-3/4" deep x 66" tall for standard 40" x 24" alcove openings. When those measurements match your space, the pan drops into place, a standard 2" drain strainer (sold separately) connects at the opening, and the wall kit lines up around it so the replacement keeps moving.
Shower floors and tub bottoms usually fail when weight is not carried evenly underneath, and that kind of setback can drag out a repair you just want finished. This pan uses a pre-installed foam base that keeps the bottom seated securely and evenly during installation, giving the floor direct support where stress builds up. Once it's set on a prepared surface, the base stays supported underfoot and the shower area is ready for regular use without feeling like a patched-in weak spot.
Water slipping past the edges can soak surrounding wall areas and turn a base swap into interior repair. The pan uses a 3-sided flange and a 4-5/16" deep basin to keep water directed back to the drain, while the surround covers the wall surface around the bathing area to create a continuous barrier once sealed during installation. With the pan and surround finished together, water stays inside the shower footprint and the wall area around it stays protected during use.
Stopping at the base can leave the shower area looking unfinished, and delays get frustrating when you are trying to get the space back in service. The surround mounts with pressure sensitive tape, ABS-compatible spray adhesive, or rivets (sold separately), can be drilled or adjusted on-site for fixtures and layout constraints, and adds 3 molded shelves to keep soap and bottles within reach. Once the walls are in place around the pan, the whole shower area looks finished, keeps essentials off the floor, and is ready to use with the solid, reliable feel of a fully replaced setup.
Alternate Instructions
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.