You turn on the faucet and the water lands where your hands are, so you can wash without pressing them into the back or bottom of the sink. This vessel-style design positions the flow higher, and the single lever gives you control in one motion.
The spout sits higher in the sink area so the water stream meets your hands instead of hitting low in the basin. That extra clearance changes how you use the sink, especially when washing or rinsing without pressing into the back or bottom. You get usable space under the flow instead of working around it.
Small adjustments can shift temperature quickly when both hot and cold run through one control. The single lever handle adjusts flow and temperature from one point using a ceramic disc cartridge. You can move between settings without switching between handles, so changes happen in one motion at the sink.
The ceramic disc cartridge seals at the control point instead of relying on flexible seals that wear out. This creates a watertight seal when the faucet is turned off. When you shut it down, the flow stops and stays off, so you are not coming back to a slow drip in the sink.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone, Steve here with etrailer. Today, we're taking a look at this B&B Molders Satin Nickel Single Lever Icon RV Bathroom Vessel Sink Faucet. Folks, this is gonna be a great upgrade for your bathroom vessel sink faucet, whether it's your RV, camper, or trailer. And as you can notice right off the bat, it's considered a high rise, so it's a little bit taller than some of your standard ones that just come out a little bit shorter. So for guys like me that got larger hands or a bigger person, this works really good for me to get down into that basin and wash my hands with ease versus having to fight getting underneath those lower ones. So I personally like this style.
You get that single lever up top, obviously, you can go hot/cold. You can't see it from your angle, I'll tilt it down here, but there's an H and a C molded into or etched into the metal there on top. As well as your connections here, you got some gaskets and this ring that twist everything up tight, and then these two set screws here on either side. You also have the two braided lines, which is really nice, it's a great upgrade, they're really, really sturdy. They have red lines on the hot and blue lines down the hose on the cold lines.
That makes them really easy to distinguish which one's which. And these are your standard 1/2 inch male pipe thread water supply lines. Now, again folks, this is a satin nickel finish. It is a zinc alloy construction, so it's a very, very nice, strong construction. And you do have a low flow aerator up inside of here as well that's gonna help conserve water without compromising the water pressure itself.
So again, you're gonna save some water, you should notice a difference as far as the flow rate and those kinda things. They're really, really nice. If you've never used one, check it out. Again, a great upgrade for you. You will need some tile and tub caulk, not included, sold separately, to complete the installation, so make sure you're checking out all the instructions and everything before you start the installation.
And if you don't wanna do the installation yourself, no worries. I think you can do it personally, but if you don't wanna tackle it, no problem. We do have an installer locator if you scroll down below the videos and the photos on the product page. We can help pair you with a trusted etrailer installer local to your area. That's gonna wrap up our quick look together. I'm Steven, thanks for watching.
Ratings & Reviews
Quality product delivered as promised.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.