California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Bulldog winch booster cables set. This is going to be a clamp to clamp set in a one gauge wire with 20 feet of length. And we'll get our nice storage case here to hold our cables. On the front, we'll have two clasps to keep that case closed. And then on the inside we'll have our cables themselves. Now again, these are going to be at one gauge wire, so it's going to be pretty thick, sturdy wire.
This is going to be 2000 amp rated, and the clamps are going to have a premium cast brass design, with a 45 degree angled noes.So it's going to make it a little easier to get our clamps put onto our battery terminals. And these are going to be obviously color coated. We'll have our red for positive, black for negative, but it's also a stamped onto each of those clamps. So we'll have the negative symbol there and the positive symbol on our positive clamp. And that's going to be on both sides of both of those clamps.
There's a split there, so we'll have plenty of room to get our clamps put onto our battery terminals. And this is going to be a double extruded copper clad aluminum wire.So as you can see it's going to be very bendy, very easy to maneuver. And with 20 feet of length, even if we're going from one truck to another, maybe over a parking spot, we'll still be able to get those hooked up pretty easily without having to rearrange too much. Now, this is going to have a TPE jacket, and that's going to be rated up to 221 degrees Fahrenheit. Again, we'll have our storage case to keep everything nice and contained.
As far as the dimensions on this case, it's going to be 18-1/2 inches long and then 14-3/4 inches tall and then it'll be 5-3/4 inches deep. So if you're storing this underneath your seat, as long as it fits within those dimensions, you should be good to go.And that's going to do it for our look at the Bulldog winch booster cables set clamp to clamp on a one gauge wire design with a 20 feet of length.
Average Customer Rating: 5.0 out of 5 stars (3 Customer Reviews)
I have a GMC 3500. I had to get these heavier cables as I burned up my cheap sets helping someone. They had bigger issues. They fried the emergency roadside guy's cables as well (I warned him). These carry a higher load and have worked without fail so far. Although a little bulkier to stow, it's worth it knowing that they will be with me for a long while. The 20' length helps with the reach. Good construction. I'd recommend if you are using them often, are people's first call to rescue them, or are a good samaritan.
Nice box that it came in on time what was expected.
Quality products at great prices. Everything arrived extremely fast. Great job!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.