Video Transcript for DIY 2020 Toyota Tundra Installation for the WeatherTech Front Auto Floor Mats

Hey everybody, how's it going Today, we're gonna be going over the WeatherTech Custom Fit Front Floor Mats here on a 2020 Toyota Tundra. So this is what our floor mat is gonna look like installed, and if you ask me, WeatherTech floor mats definitely look the best out of all the other options, because they are a very custom like fit. They actually use a program that uses lasers to map out the interior foot well here, and then they mold the plastic to that exact specification, so you get a very tight custom like fit with no movement whatsoever. So, with these WeatherTech mats, you're also gonna get more coverage. Most standard floor mats just cover the bottom part here, whereas you can see, the WeatherTech one, they have ridges all the way around, we actually cover part of the threshold over here by the door that go up much higher here, even on this panel here, which is a common kick panel, so we have some protection there, and if you follow that all the way around, you'll see we just have a nice raised ridge on here, so that's gonna do a great job of adding extra protection, and it's also gonna keep all those dirty contaminants such as water and mud here in the mat, so it doesn't get flung on your carpet. So the grooves in our floor mat here, these just do a great job of helping provide more traction just like the seeps that you have in your car's tire.

It's gonna give a way for all that mud, dirt, and water to sorta channel out from there, that way, you get a nice grippy surface, you don't have to worry about slipping or falling on. So, in regards to the construction of our mats here, they're made of a plastic, but they do have a nice rubber coating there, which is gonna do a great job of helping provide that extra grip. And these also, as we said earlier, in regards to this, the aesthetics of the mat, they definitely hold their shape over time due to that material construction here, so they're gonna stay the same shape here as they we're when they're new as they will five years down the road. So these floor mats here do have a manufacturer's lifetime warranty, so you don't have to worry about anything going wrong, and they are made right here in the USA, so you know you're getting a quality product. Now, in regards to installation, because they are custom fit, this is very simple, we can show you how to do this now.

So the first step of your installation, you wanna grab one of your two floor mats here, doesn't matter which side you start with, we're gonna be starting over here on the passenger's side, therefore, we're gonna be grabbing the passenger's side floor mat. So what we wanna do is, in your kit here, you're gonna get these two little spiky pegs. So there's actually gonna be two keepers underneath that that you just simply press these into, so these are only used over here on the passenger's side. So they are kinda hard to seed in there, you could use some sort of tool to press them down or you can just use your thumb, but basically, it's just a little ball and socket joint and you just press those in one on either end. And then we're gonna come in our vehicle here and you're gonna remove any floor mats or any floor coverings that you have in there, and once that's done, if you choose to, you could sweep out the floor there, make sure there's no dirt underneath, but now, we're ready to install the mat.

So as you'll see here, they just drop right into place, they're gonna fit in there perfectly, and you don't have to do any additional fastening or securing. So now that we have the passenger's side secured, let's go ahead and jump over to the driver's side, so we can show you how to install that one. So on the driver's side floor mat, this is what it looks like. You'll notice we have two little cutouts here on the bottom, so you don't have to worry about any of those spiky pegs, these are actually gonna secure to some twist knobs that are already in the floorboard, so we'll go ahead and set this mat into position. So it may help to move your seat back a little bit, depending on where you have it, but then we're just gonna line up these pegs on the bottom here with the cutouts there on the floor mat, and then once we do line those up, you're gonna twist them to lock them in place.

So yeah, it's kinda difficult there, you gotta press down on the outside ring and then you can get your fingers in there, pinch them to turn it. So we've got our front two floor mats installed, and that's pretty much it. But WeatherTech actually does offer a couple different options for this vehicle, they have one that goes into the back there, depending on if you have the Double or the CrewMax cab, and they also have one that goes in your bed as well. That's gonna do it today for our look at the WeatherTech Custom Fit Front Floor mats here on a 2020 Toyota Tundra..