Bestop Custom Auto Floor Liners - Rear - Black

Video Transcript for Bestop Rear Floor Liners Review - 2016 Jeep Wrangler

Today on our 2016 Jeep Wrangler, we're going to take a look at and also show you how to install the Bestop custom auto floor liners. These are for the rear in black. Part number is B5150301. Now the kit's going to contain two pieces, so we're going to have everything we need to take care of the rear driver's side and passenger side. Here's what our mat's going to look like installed. As you can see Best Top's done a great job of custom designing this, making sure that we've got full coverage. It even comes up underneath the seat here, all the way around, making sure we stay covered on our carpet.

The raised edge that we've got all the way around the outside of it here, that's going to give us maximum containment so even if we get some snow or some mud or something on our mats like that, we're not going to have to worry about it spilling over onto our carpet itself. You can see the tread design here is made to give good traction, and also stays right along with the Jeep look, with the nice full wheel drive kind of accent. These are really easy to clean. Simply pull them out, hose them down, let them dry. The mats are constructed of a durable TPE material, which is going to resist UV rays, which is very important with Jeeps. A lot of times, hopefully you've got the top off enjoying the weather.

We don't want these to start to deform, or crack or anything like that. Also going to hold up against chemicals, so if you get a little oil on your boots or something like that after work, you're not going to have to worry about it eating through the material. You can see the little tabs that are going to stick out, the little bumps that stick out here on the back. They've molded those in to help give us good grip. The TPE material provides good grip, as well as the lugs.

I think the tallest one's like 5/16 of an inch. They really do stick up there and allow you to get good traction on them. We won't have to worry about this material deforming, anything like that. It's really nice, heavy duty Jeep mat. Of course installation's very easy. You're just going to lay it down here in place, get it lined up, and then just push it down to allow those tabs or those little bumps to get a good grip in our carpet.

As you can see, passenger side, driver's side, exactly the same. Got a raised rail around the outside. Really nice custom fit. Going to have those grooves in the bottom which, not only do they help for traction, but this is also going to keep our feet and our pant's legs up out of the water. Coverage is going to go right up underneath our seat here. Slide it back. You see we've got that good coverage, it's going to come all the way up and get underneath that seat so we won't have to worry about any mud or dirt getting underneath them. That's going to complete our look at the Bestop custom auto floor liners for the rear, in black, part number B5150301, on our 2016 Jeep Wrangler.