To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Keep your factory fabric, vinyl or leather seats looking brand new with these custom-fit, slip-on covers. Seat protectors are made of heavy-duty poly cotton, so they won't stick to you on hot days, and they're machine washable and dryable.
Features:
Specs:
Note: Covercraft does not recommend using dark-colored covers on light-colored vehicle interiors. Discoloration of vehicle fabric may occur.
The diagram above shows the shape of the seat covers included with this Covercraft SeatSaver set. Your vehicle's seats should match the shape of the seats in the diagram.
SeatSavers protect your vehicle seats without the inconveniences of typical seat covers. The SeatSavers are custom fit to your specific seats - so there's no sagging or rumpling - and they are constructed of durable, breathable fabric for lasting comfort.
SeatSaver covers slip on and off easily and protect your entire seat from dirt, children's messes, pets, harmful UV rays and everyday wear and tear. SeatSaver's custom-fit design also allows unrestricted access to adjustment knobs and seat belts.
Typical neoprene seat covers create a "sticky" effect in hot weather. But the SeatSaver seat protectors are made from a breathable poly cotton fabric that won't stick to you on hot summer days, even as the drill-weave construction ensures strong, durable covers.
The material is treated with a durable water repellency (DWR) finish that stops most spills from ever reaching your seats through the covers. And SeatSavers are easy to clean when accidents happen. Just pop the SeatSavers into the washer, throw them into the dryer and slip them back onto the seats.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we will be taking a look at the Cover Craft custom seat covers for the second row. These are available in a wide variety of colors and camouflage patterns right here on etrailer.com. The covers we're working with today are specifically designed for a 2016 or 2017 Hyundai Tucson. Pets, children, one third of a rugby team, these are all things they can dirty the interior of your vehicle. Cover Craft has a custom fit seat cover solution. The seat cover itself is made out of a durable poly cotton blend that's 100% machine washable.
It's an elastic fit to not only covering your back rest and bench but also your head rests and even your arm rest. It features a water repellent finish so mud, water, and other spills won't penetrate down to your seat. They are an easy inexpensive solution for protecting the interior of your vehicle. To begin our install I've roughly laid out the seat cover in the position it's going to go on to our seat. The first thing we'll need to do is the factory has attached the headrests and our center portion here with just these little plastic connectors. We can go ahead and just snip those off so we have these ready and available when it's time to install them.
And then in order to get our seat cover in place, we're going to have to temporarily remove our head rest. Just push in on this button here on the side, that's going to give us the access we need to lift right out. You've got your center seat belt connected and you're going to want to go ahead and disconnect that as well. When you do that is just push in on the right you can't quite get it with your finger, something stiff like a key is going to take that right out. Now we are ready to begin placing our seat cover into place. If you look at the seat here, they one on the driver side as a single unit and the center and the passenger side operate as one unit as well.
We're going to start here on the driver side with our single unit and begin to stretch that over. It might help if you pull up on your lever on the side to tilt that seat forward and you can begin stretching it over. With it stretched over, I'm just going to leave it here in this center position while I move on to my passenger side. Do the same thing over here. You can see it's the two piece unit here, I'm going to tilt of forward and take this portion of our seat cover and stretch it over. And you want to be sure and stretch it far enough that the holes for our seat head rests are lining up.
So with our back rest portion in place, we can turn our attention to the seat. There are foam inserts here in this little pocket on the inside, this is what's going to help keep it in the crease here. We are going to those in between the top and bottom portions of our seat. And then we can take the elastic portion and stretch that over our seat and our plastic clip right here is designed to simply hook underneath our trim panel right there. I will just follow that elastic all the way around tucking it in place. We've got another of those foam inserts here in the center which we can tuck in, that's going to help keep it tight. It's going to tuck in right between our seat and the base like so. As we make our way across just want to make sure there's plenty of room for our seat belts to come through the designated holes and we will repeat that same process on the other side with this foam tab. Tuck it in, then we'll pull our corner tight, and then again our hook will just go under the trim. We've got one final pad to push in here in the middle. Now we can tilt both halves of our seat forward, we've got some hook and loom fasteners on the back to connect. When we push through those tabs earlier, a portion of hook and loop should have come through as well. We're going to bring that up and connect it to this half of our hook and loop fasteners. Now to get those fasteners connected, it's actually going to be easier if you come back here to your spare tire cover and just pull that forward slightly. It's going to give you that space you need to reach down and grab it and connect everything. So now as you can see we've got good access to both of our hook and loop sides, and you're going to want to pull down straight on the elastic side, and then bring up the other hook and loop side, and connect as much of those two as you can. Just like that. Then on each side we have a hook in neutral strap that we'll need to disconnect. We'll pass it between the seats and it's going to go on the inside of this rotating pillar and we'll pick that up on the other side. Same story here, stretch our elastic as tight as possible and connect the hook and loop just like that. Put our seat back in place and repeat it for the passenger side. Now we can turn our attention to the armrest which conveniently also doubles as a cup holder. Cover Craft has taken into consideration our cup holder and has a cut out for that. We can slide our cover on with the hole facing up. Then we're going to take the flak with the hook and loop on it, we're going to cut that up underneath and grab it from the inside, just like so. Then at the top here we can pull our tab through, that way we still have access to pull in and out our arm rest. Now we can put our head rests back into place, they just slide right down. Our head rest covers simply stretch over the top. And with our last one in place, we're all set. If you haven't connected before, just go ahead and reconnect your center seat belt. And that's going to complete our look at the Cover Craft seat saver custom seat covers from the second row.
Ratings & Reviews

Mike L.
7/25/2019
According to Covercraft, this seat cover set does not come with front strap, it tucks down into the base of the seat, with pillow s in the side crevice area, if not installed properly it will pop out. They recommend reviewing the installation instructions.

Mark
7/24/2014
The covers are awesome. I even ordered a second set as a back-up in case the original ones get damaged or worn out which does not seem too likely, as we have two border collie dogs and the seat covers are wearing like granite. It seems rare now days to get such a rock solid product that fits nicely and wears so good. Congrats!

Jd
12/2/2024
These are GREAT seat covers. Thick and sturdy, just what I needed.

William
8/2/2024
After a year, we love our seat covers. They still look great and really help with OEM seat wear and tear. They pop right on and off for an occasional wash and dry.

Nan R.
5/8/2021
Very heavy duty material. Theses will not wear out.

Robert B.
9/20/2020
Still awesome!! Highly recommended.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







Gary
6/20/2021
The seat covers still look great and have not worn or faded after 2 years of parking outside every day.