Upgrading to lithium or replacing a converter should not mean changing settings or rewiring your panel. This power center automatically detects your battery type and charges it correctly while managing your RVs AC and DC distribution in one panel.
The internal microprocessor identifies whether your system uses lithium-ion or lead-acid batteries and automatically applies the appropriate charging profile. No switches or manual selection required when upgrading batteries.
This unit combines a 60A converter charger with AC and DC distribution in a single enclosure, simplifying upgrades and reducing the need for separate components inside your RV.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer. Let's take a quick look at this WFCO Auto-Detect RV Power Center. Now this power center is going to combine a 60-amp converter battery charger and AC/DC distribution panel into one unit, making this a great choice for powering and managing your RV's electrical system. It's going to automatically detect whether you have lithium or lead-acid batteries, and switches to the correct multi-stage charging profile so your batteries are charged safely and efficiently without any manual adjustments. The built-in converter is going to deliver up to 60 amps of DC power, giving you plenty of capacity to run larger RV electrical systems, while keeping your batteries charged whenever you're connected to shore power.
It's also going to simplify your wiring by housing both the AC and DC distribution panels in one enclosure. The AC side includes a 30-amp main breaker with room for nine additional branch circuits, while the DC side supports 13 fuse circuits, including three rated for up to 30 amps, and 10 rated up to 20 amps, giving you plenty of flexibility for lights, appliances, and other accessories. To help ensure reliable operation, this unit includes protection against overloads, short circuits, and reverse battery polarity and overheating. A two-speed cooling fan is going to automatically adjust, as needed, to keep temperatures under control. And the zero-clearance design is going to allow this to be installed in tighter spaces without requiring extra ventilation around the unit.
So this is going to operate on standard 105 to 130-volt AC, 60-hertz shore power. The converter provides up to 820 watts of rated DC output with the maximum 60-amp charging capacity, making this a dependable, all-in-one power management solution for your modern RV electrical systems. Leaving you with some measurements here. The overall height is about 13 inches. The overall width, about 9 5/8 inches.
And then the depth, about 8 3/8-inches deep, or so. If you think you might need some help with installation, on this product page, typically found underneath the photo section, we have a tab that will take you to our Installer Locator. Click that link, answer the questions that it has for you, and that locator will find an installer in your area that etrailer has partnered with to help you with the install. Well, again, my name's Andy. Thank you for joining me.
.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.