etrailer Replacement RV Dinette Tabletop - 44" Long x 30" Wide - White Wood w/ Trim

Video Transcript for Review of etrailer Replacement RV Dinette Table Top White - e74RR

Hi, everybody. Andy here with etrailer.com, and today we're gonna take a look at this etrailer replacement RV dinette tabletop in white. This is going to replace or upgrade the tabletop for your etrailer RV dinette table, or it can be used with other dinette brands of the same size. So this will work as a direct replacement for the etrailer dining tables with the item numbers that you see there on your screen. However, if you are going to be using this tabletop with another dinette brand, let me go ahead and give you the overall measurements so you can be confident that this is going to work for you. So as you can see, the overall length is right at about 44 inches long.

And the overall width, we're sitting right at about 30 inches wide. And this table is 1 1/4 thick, and this weighs about 20 pounds. Let me let my camera come back into focus there. There we go. Now, this is going to require one or two tabletop leg kits for a complete setup, and those are sold separately, but we do carry them, and we carry a flush mount or a surface mount mounting kit.

So whichever one is going to work best for you, I'm including our item numbers for those kits on your screen. Just take the item number of the one that you're interested in, put it in the search field of our website, and it will take you to that mounting kit. Now, this table does have internal screw plates that's going to assist in screw retention of the screws that you're going to be using for the legs. So inside of the table itself, we have those mounting plates, and we have identified where those mounting plates are in the table with these stickers. So you can confidently install your table leg knowing that it's going to be mounted where that plate is underneath the table.

So as you no doubt know if you're gonna use one table leg, you're gonna install that right in the middle. And if you're gonna use two table legs, you'll just install it on either side of the table. So that plate within the table is going to make sure that the screws that you are using to mount the table legs are going to hold tight. You're not gonna have to worry about the screws loosening up and potentially falling out. So that's another nice feature of this table.

Now, taking a closer look, this table is made in the USA- of an ultra-strong, high-density EPS foam tabletop core that is going to ensure durability and stability. There is no flex in this table when I'm moving it around. It's very solid. It doesn't feel or sound hollow. So again, this is a solid table, a durable table, and I think it's gonna give you many years of great service. This white laminate finish is gonna go with just about anything. However, if you're not interested in white, we do carry some other finishes here, as well. For instance, we have a wild cherry, or a just a regular, it's a cherry wood grain finish that's a laminate available, and that's one of my favorites. Or we also carry this in a in a maple finish, as well. So if you don't want to go with white and you're interested in those other finishes, check those finishes out here at etrailer.com. We do carry those, as well. This does have a black edging that goes around the perimeter of this table that not only adds a contemporary feel, but it also reinforces the table sides and it seals out moisture, preventing the tabletop from peeling, cracking, or warping. This does include an instruction sheet to help you through the very easy installation process. And that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..