Changing your gooseneck coupler height can leave you hunting for a dropped retaining clip. This 3/4" quick-release pin uses a push-button handle and end cap instead, so you can reposition the tube without handling a loose clip.
Your trailer might already have a lock covering the gooseneck ball opening, but an adjustable coupler tube can still be vulnerable if someone can pull its retaining pin. PinUltimate replaces that conventional pin with one whose end cap is secured by a key-operated lock. With the cap locked, someone cannot release the pin normally without the key. That adds a theft deterrent for the adjustable tube when your trailer is parked.
To install the pin, depress the release button on the handle, slide the pin through the aligned holes, and press the end cap into place. When you need to remove it, insert the key in either orientation and turn to unlock. Then use the release button to remove the end cap, and pull out the pin. You still have a cap to handle, but no small retaining clip to wrestle with or lose. The machined handle is large enough to grip even when wearing gloves and the red colored cap and handle increase visability.
The pin measures 3/4" in diameter and has a listed 5-1/8" usable length. Measure your gooseneck tube and pin holes to make sure both dimensions are right for your setup. Its 40,000-lb load rating applies to the pin, not the entire towing system, and the coupler manufacturer must permit this type of replacement.
The pin is made from heat-treated 17-4 stainless steel for strength and corrosion resistance. Its red-anodized aircraft-grade aluminum handle resists corrosion, too. The pin is backed by a lifetime warranty. To care for it, wash and dry it when you wash your tow vehicle, and occasionally apply WD-40 to the lock cylinder rather than grease.
A lost key can become a real problem when the lock is doing its job. This pin includes two keys and a credit card-sized identification card with its unique serial number, assembly date, assembler's initials, toll-free number, and website address. The serial number is also engraved on the locking handle. If both keys go missing, you can contact Big Sky Precision and purchase replacements using that number.
A locking pin is a theft deterrent, not a guarantee against theft.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.