Flex-a-lite Fan Spacer Kit for Belt-Driven Fan - 1"
Item # FLX14548
Retail:$40.81
Our Price: $25.79
You Save: 37%
Confirmed to Fit
1976 Jeep Cherokee
4.2L I6 Engine
5.9L V8 Engine
6.6L V8 Engine
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Orders above $99 qualify for Free Shipping
- All Info
- Q & A (0)
- Videos (1)
- Photos
1976 Jeep Cherokee - Flex-a-lite Fan Spacer Kit for Belt-Driven Fan - 1"
- Radiator Fans
- Spacers
- Belt-Driven Fans
- Flex-a-lite
- 1 Inch Long
The Flex-a-lite fan spacer kit provides the required spacing needed from the fan to the radiator. The large bearing surface and machined soft radius reduces point-loading which is the most common cause of stress cracking on the fan center star. Mounting hardware included.
- Allows proper spacing of belt-driven fan
- Durable aluminum construction
- Thickness: 1"
- Bolt size: 5/16"-24 x 1-3/4" fine thread (NF)
106880 Flex-a-lite Fan Spacer Kit for Belt-Driven Fans - 1"
108430
Replaces Flex-a-lite 14548
Video of Flex-a-lite Fan Spacer Kit for Belt-Driven Fan - 1"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Flex-a-lite Radiator Fans FLX14548 Review
Today we're going to take a look at the Flex-a-Lite 1 inch Fan Spacer Kit for a Belt-Driven fan. This Flex-a-Lite fan spacer kit will provide the required spacing that's needed from the fan to the radiator. It has a nice large bearing surface, machine soft radius, which will help reduce point loading, and that's the common cause of stress cracking on the fan center star. This spacer kit is a durable aluminum construction. It does help correctly position your belt-driven fan when you're eliminating the fan clutch. All the mounting hardware is included. I'll give you a few measurements on this.
Again, the thickness of this spacer is going to be right at 1 inch. The mounting hardware that it comes with is shown right here. The bolts they use are at 5/16 x 24 threads per inch. It's a fine thread. The length of the bolt, which is measured from under the head to the very end, is going to be right at 1 and 3/4 inches.
That should do it for the review on the Flex-a-Lite 1 inch Fan Spacer Kit for Belt-Driven Fans.
0
0
See what our Experts say about this Flex-a-lite Accessories and Parts
- Is the Flex-a-lite Fan Spacer Kit Required on a 289 Windsor Ford EngineThe 14" Belt Driven Radiator Flex Fan part FLX1314 is a universal belt driven puller fan that is designed to work on a variety of applications. As long as the bolt pattern on your water pump has 4 bolt holes ranging from 1-5/8" - 2-1/8" apart, the above fan should work for you. Unfortunately, there would be no way for me to tell if your application would require a spacer or not. You would need to visually inspect how far out the water pump pulley extends and compare that distance to possible...
view full answer...
Info for this part was:
Installed by:
Jeff D
Updated by:
Wilson B
Updated by:
Jessie B
Written by:
Jacob W
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.