How Do You Reset the Progressive Dynamics Converter # PD9260C?

Question

Question:

Trying to find a way to reset the unit

asked by: Garycase

0

Expert Reply:

I reached out to my contact at Progressive Dynamics, and he confirmed that there is no factory reset setting button on the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger # PD9260C. However, he recommended that you unplug it from the wall outlet and remove the dc wires. Once the wires are removed, you will then need to reconnect the dc wires and plug it back in. This should reset the converter.

expert reply by: Bob C

0

Answer 1

Yes. You can replace the Progressive Dynamics PD4590K18NS2 with the Replacement Converter Section for Progressive Dynamics 4500 Series RV Power Control Center - 90 Amp #PD4590CSV without any issues. Both are 90 amp converters from the same Series and…

view full answer...

Answer 2

The "Trailer Disconnected" error message on the dash with a factory brake controller is usually related to an issue with the blue brake output wire that runs from the brake controller to the 7-Way connector. The fact that the issue remains…

view full answer...

Answer 3

The picture that you sent in is of a PD4590CSV. The Replacement Converter Section for Progressive Dynamics 4500 Series RV Power Control Center - 90 Amp #PD4590CSV is also a PD4590CSV. So if you are asking if that can replace what you currently have…

view full answer...

Answer 4

Hey Bobby, You will want to use either solid or stranded copper wire between 2 and 14AWG for the positive and negative connections to the battery. The gauge will depend on the length of your run from the Progressive Dynamics PD9200 Series Battery…

view full answer...

Answer 5

I would be happy to help! The charge current coming from the alternator is not going through the converter portion of your your panel as a converter converts AC power from shore power or a generator to DC power for your batteries. Since the…

view full answer...

Answer 6

I do have a simple wiring diagram for the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger - 12V - 45 Amps #PD9245C. Basically you just need to run the power wire from the converter directly to the DC distribution panel and…

view full answer...

Answer 7

Yes the Progressive Dynamics Inteli-Power Converter part #PD9260C would do a really great job keeping the batteries of your Airstream charged. This is a smart charger that will analyze the battery's current condition and give it the best charge…

view full answer...

Answer 8

I recommend using the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger #PD9245C to charge the batteries with your Progressive Dynamics Pure Sine Wave Inverter #PD64FR. There is a certain way that it will need to be wired in…

view full answer...

Answer 9

The only difference between the Progressive Dynamics Inteli-Power RV Converter and Battery Charger #PD9160A and the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger #PD9260C is the charging cycles. The #PD9160A only has one…

view full answer...

Answer 10

The fan on your Progressive Dynamics #PD9260C running more often than usual could mean a couple of things are going on here; and you're correct in thinking that most of them aren't a good sign. It sounds like you've cleaned out the vents…

view full answer...

Answer 11

No, the Progressive Dynamics PD9200 Series Battery Converter Charger with Charge Wizard #PD9260C reads the battery's charge level and adjusts the charge it sends to the battery accordingly so you can have multiple things charging the battery at…

view full answer...

Answer 12

Hey Craig, It sounds like you are asking if you can use the Progressive Dynamics converter #PD69RR to charge a battery that has a 3 panel solar panel setup also charging it. The answer to that is yes you can.

view full answer...

How Do You Reset the Progressive Dynamics Converter # PD9260C?

Featured Help Information

Miscellaneous Media

Continue Researching