Could Running Boards from 2010 Ford F-150 Fit 2017 Ford F-150

Question

Question:

Will 2010 Ford f150 running boards fit on a 2017 f150?

asked by: Josh S

0

Expert Reply:

There was a big enough change between 2016 and 2017 Ford F-150s that the running board fits had to change. So that means a fit from a 2010 would not also fit a 2017. So you'd need a set like the part # 27-6600-2175 for the 2017 if you have a crew cab or supercrew cab. Or for a regular cab you'd want part # 27-6600-2175.

expert reply by: Jameson C

0

Answer 1

For your 2018 Ford F-250, the B&W Custom 5th Wheel Installation Kit for Ford #BWRVK2402 is the correct fit for 2017-2019 Ford Super Duty models. It will require no drilling into your truck frame as the brackets utilize holes already present. This…

view full answer...

Answer 2

Yes, the Curt Fifth Wheel Installation Kit for Ford F250 and F350 - Gloss Finish item #C16443-104 will fit your 2018 Ford F-250 Super Duty. For a better kit that does not require drilling into your frame I recommend the Reese Quick-Install Custom…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Yes, we do. What you are describing sounds like the Inner Frame Brackets for Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Hitch item #RP27FR. I have attached a picture below. These come welded to the frame exactly where you…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

Hello Mark, thanks for reaching out. Both the Reese #RP37KR and #RP67KR are for the 2023-current F250, F350 and F450. The difference is the #RP67KR includes the 30924 5th Wheel Mounting Rail Adapter part #RP47KR. This kit is intended for vehicles…

view full answer...

Answer 8

No, it does not Tim but I have one that does. Instead you will want the Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches item #RP67KR. This is an identical set up to not only the one you were looking at but also…

view full answer...

Answer 9

Hey Jack, If you're talking about a transition plate then you'll want the etrailer Enclosed Trailer Transition Plate #e32JR. This can be installed on either end of the ramp to help make the transition onto easier or at the hinge of the ramp…

view full answer...

Answer 10

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 11

To know if your 2017 Ford F-350 has an in-bed puck system installed you'll just need to look and see if you have four rounded attachment points (usually covered up when not in use, like in the attached picture). If you don't see these in your…

view full answer...

Answer 12

Great questions! Reese actually makes the OEM puck system for Ford so if the 2022 F-250 is cheaper by a lot then I recommend going that route and installing the Under-Bed Rail and Installation Kit #RP87FR. The only thing you'll really be missing…

view full answer...

Could Running Boards from 2010 Ford F-150 Fit 2017 Ford F-150

Product Page this Question was Asked From

Continue Researching