bing tracking image
Summer Deals You’ve Been Waiting For
SHOP DEALS
Customer Service My Orders
Q & A Icon

Recommended Trailer Axle For Haul Master 4x8 Foot Trailer  

Question:

I need to replace axle and hubs on my Haul master 4 by 8 trailer. I believe the old axle was rated only 1200#. do you know if your set will fit?dexter trailer axle with idler hubs 60 2000#

0

Expert Reply:

Replacing your existing axle with the Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs # 20545I-ST-60-15 or Dexter Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs # 20440I-ST-60 will work fine as long as the Hub-face-to-hub-face length is 60 inches and spring-center-to-spring-center length is 48 inches. This will give you a higher capacity axle but you will still be limited to whatever weight capacity the weakest component of your trailer is.

If your measurements don't line up, then I recommend going with the axle-less system. If you have a 4 on 4 inch bolt pattern, then # A12RS440 is the correct replacement. Otherwise you can use the # ASR1200S04 You can use a 2 inch square tube to connect these parts using the integrated hole if there isn't a frame cross-brace at your axle location.

expert reply by:
0
Jason S

Products Referenced in This Question




Product Page this Question was Asked From


Featured Help Information

Instructions

Instructions for ASR1200S04

Miscellaneous Media

All You Need to Know About the Dexter Trailer Axle with Idler Hubs
All You Need to Know About the Dexter Trailer Axle with Idler Hubs - Video
Dexter Trailer Axle with Idler Hubs Review
Dexter Trailer Axle with Idler Hubs Review - Video
Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>