How To Install Replacement Side Mirror on 2010 Honda Odyssey

Question:

Hi, my side mirror broke and needs to replace it, does the pkg include instruction on bow to replace it

asked by: Sam T

Expert Reply:

I called my contact at K-Source and they told me most of the mirrors are such an easy install they do not include instructions with the mirror.

The removal and installation of the K-Source Replacement Side Mirror, part # KS63015H on your 2010 Odyssey is a very simple task. This is for the passenger side. If you need the mirror for the driver side you will need part # KS63016H.

You just need to remove the protective cover on the inside of the door and you will have access to the three nuts holding the mirror in place. You will want to first disconnect the electric wiring harness from the mirror and then loosen and remove the nuts.

Then just slip the new mirror in place. It will have the bolts attached to the mirror and should easily slip into the holes on your door. Install and tighten the nuts on the bolts and plug the wiring harness connector in. Replace the plastic sleeve and turn the ignition on to test it.

expert reply by: Jeffrey L

Michael B.

2/27/2025

On my 2010 Touring the plug right behind mirror WILL NOT disconnect so I need a mirror with harness wiring to go behind the door panel to plug in. If I can find harness online just for mirror because replacing ones only have mirror with plug next to mirror. How far down does wiring go down ?

Kate F.

2/27/2025

@MichaelB Hello Michael, On a 2010 Honda Odyssey, the wire connector for the side mirror is typically located behind the door panel, near the mirror mounting point; you will need to remove the door panel to access it. I recommend reaching out to Kia directly to get the wiring harness. What happed to your current mirror?