Custom Fit 2001 Ford Van Accessories

As long as your 2002 Ford E-450 chassis is equipped with a factory 7-Way or 4-Way at the rear bumper then there should be a brake controller plug-in port behind the dash to the right of the steering column. If this is the case on your E-450 then to…

It does sound like the brake controller is going to have to be hardwired into your Holiday Rambler. To do this you can use wiring kit #5506 but you may also need some additional duplex wire, #10-2-1, sold by the foot, if the included 25 feet is not…

The brake controller connector is typically located behind the emergency brake pedal, where the floor board, kick panel, and firewall all meet. The connector is brown, and usually only one pin should show voltage, with another showing voltage only…

That looks an awful lot like a Penguin or Dometic RV Air Conditioner. We offer the Replacement Cover #AT3308046006 which appears to be very similar, only white in color. The #AT3308046006 cover is 7" tall, 29" wide and 40-1/2' long. I…

We do offer a direct replacement for the Dometic Duo-Therm RV Air Conditioner. The Advent Air RV Air Conditioner part #ACM135 for 13.5K or part #ACM150 for 15K is what I recommend. This unit will be a plug and play fit and it will work with your…

Since you have a Dometic Penguin RV AC Unit the correct replacement shroud would be the Atwood #AT3308046006. Thanks for the pictures!

From what I could find out, the Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners #AT3308046006 should fit your Dometic 630035.321. However, I couldn't find anything saying this 100% so I do suggest measuring to double…

We've actually got a great installation video of a Tekonsha P3 #90195 that I've linked to this answer that you can use to follow along with the installation process, but I'll also match up the wires for you below based off of the wiring…

I spoke with my contact at Tekonsha regarding the P-3 Trailer Brake Controller, #90195. He stated that the brake controller will save your settings even if disconnected. This includes everything from the background color and language to the boost…

I have exactly what you need to install a 7-way trailer wiring harness on a 2001 Ford E-350. That said, they don't make a direct plug and play 7-way for this vehicle so you will need to start with a 4-way first like the T-One Vehicle Wiring…

Since you need hubs with an 8 on 6-1/2 bolt pattern, the Timbren Axle-Less Suspension System you would need to use is #TASR7KS01, which is rated for 7,000 lbs. The hubs that fit these Timbren's are the Dexter #42866UC3-EZ, and the brakes to go…

For your 2011 Ford E-250 we have the Westin Fey Diamondstep Rear Bumper which is offered in black part #20107, silver part #20105, and chrome part #21105. These options are all custom fit and they come with all the brackets and hardware needed to…