Custom Fit 2013 Ford Fusion Accessories

If you were to install the EcoHitch #306-X7239 on your 2017 Ford Fusion then you would have to permanently remove the plastic underbody panel as you can see from the attached photo which is directly from the instructions. I have also attached a photo…

The EcoHitch Hidden Trailer Hitch Receiver part #306-X7239 is a great option for a 2016 Ford Fusion. It has the larger 2" receiver tube opening which will greatly expand the variety of hitch mounted accessories to choose from. The EcoHitch…

Our trailer hitches are designed with the towing capacity of the vehicle they are intended for in mind, but they are then rated separately which is why you'll see a lot of time our hitches having higher towing capacities than the vehicles they…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

On both a 7-Way and 4-Way trailer connector the brake lights and turn signals are on the same circuit so it is strange that the brake lights aren't working. But, brake lights draw more constant power than the running lights or the turn signals so…

First thing you should do at this point is test the 4-way of the wiring harness with a circuit tester part #PTW2993 for voltage on all of the right pins when the taillight signals are being applied. Just like in the video I attached. If the voltage…

On a trailer the brake lights and turn signals operate on the same wire/bulb. So, it is odd when the turn signals work, but the brake lights don't. There are 3 possible causes for this that are more likely than any of the other possible causes.…

The rear portion of the Epicord 30 Amp Twist Lock Power Inlet - White #277-000137 that you referenced is 3 inches so a hole diameter of 3-1/4 inches would easily work. I attached an install video for this for you to check out as well.

We do carry a service/rebuild kit for the Roadmaster Falcon 2 Tow Bar #RM-520 that you have that the arms of are not wanting to function properly. You would want a Roadmaster Service Kit for Falcon 2 Towbar #RM910003-65. I spoke to my contact at…

Yes, we have all the parts and information you will need to safely and legally flat town your 2016 Ford Fusion Hybrid First you will need a vehicle specific base plate kit. For your Fusion Hybrid WITHOUT adaptive cruise control you can use the…

I'd be happy to help you with that. You'll need a base plate, tow bar, safety cables, a wiring solution, a supplemental braking system and possibly a high/low adapter if the height difference between the base plate (13 inches) and the…

I have a solution for carrying bikes with your 2013 Ford Fusion, but there are no trunk mounted options that have been confirmed to fit your vehicle. Instead I would recommend a hitch and hitch mounted bike rack. Hitches provide basically the best…